From: Bo Shen <voice.shen@atmel.com>
To: "Raphaël Poggi" <raphio98@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: atmel_nand pmecc on 8k page
Date: Fri, 13 Jun 2014 09:26:43 +0800 [thread overview]
Message-ID: <539A5353.7090306@atmel.com> (raw)
In-Reply-To: <CACqcpZDTj-XaPOyH+Twhku26eSa-S3p3xDOWszAQC7JKfOyfsA@mail.gmail.com>
Hi Raphaël,
On 06/12/2014 08:28 PM, Raphaël Poggi wrote:
> Hi,
>
> I'm working on a series of patches, to support 8k nand page in
> atmel_nand driver.
>
> Currently, I can detect the nand and handle an oob size of 448. But i
> have a problem with the pmecc, when barebox tried to perform pmecc
> operation, I get the following message:
>
> PMECC: Timeout to calculate error location.
>
> Example of log:
>
> nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0x68 (Micron
> MT29F32G08ABAAAWP), 4096MiB, page size: 8192, OOB size: 448
> atmel_nand atmel_nand0: Initialize PMECC params, cap: 8, sector: 1024
> atmel_nand atmel_nand0: PMECC: Timeout to calculate error location.
> atmel_nand atmel_nand0: PMECC: Timeout to calculate error location.
> atmel_nand atmel_nand0: PMECC: Timeout to calculate error location.
> atmel_nand atmel_nand0: PMECC: Timeout to calculate error location.
> Bad block table not found for chip 0
> atmel_nand atmel_nand0: PMECC: Timeout to calculate error location.
> atmel_nand atmel_nand0: PMECC: Timeout to calculate error location.
> atmel_nand atmel_nand0: PMECC: Timeout to calculate error location.
> atmel_nand atmel_nand0: PMECC: Timeout to calculate error location.
> Bad block table not found for chip 0
> Scanning device for bad blocks
> Bad eraseblock 90 at 0x000005a00000
> Bad eraseblock 91 at 0x000005b00000
> atmel_nand atmel_nand0: PMECC: Timeout to get ECC value.
> nand_bbt: error while writing bad block table -110
>
>
> I don't know/find why barebox get a timeout...
>
> Someone have an idea ?
Which board are you test this?
Can you try to apply two patches from matteo.fortini@gmail.com on
2014-06-06 with name
[PATCH 1/2] sama5d3x: fix HSMC MODE register offset and add TIMINGS
[PATCH 2/2] sama5d3x: HSMC NAND initialize TIMINGS and import values
> Best regards,
> Raphaël
Best Regards,
Bo Shen
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-06-13 1:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-12 12:28 Raphaël Poggi
2014-06-13 1:26 ` Bo Shen [this message]
2014-06-13 8:48 ` Raphaël Poggi
2014-06-13 12:48 ` atmel_nand pmecc on 8k page [RFC] Matteo Fortini
2014-06-16 7:19 ` Bo Shen
2014-06-19 4:31 ` Jean-Christophe PLAGNIOL-VILLARD
2014-06-19 5:27 ` Bo Shen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=539A5353.7090306@atmel.com \
--to=voice.shen@atmel.com \
--cc=barebox@lists.infradead.org \
--cc=raphio98@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox