From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
To: Alexander Aring <alex.aring@gmail.com>, barebox@lists.infradead.org
Subject: Re: [RFC 2/2] dns325: initial support for D-Link DNS-325
Date: Sun, 22 Jun 2014 23:50:56 +0200 [thread overview]
Message-ID: <53A74FC0.7080206@gmail.com> (raw)
In-Reply-To: <1403469255-9019-2-git-send-email-alex.aring@gmail.com>
On 06/22/2014 10:34 PM, Alexander Aring wrote:
> This patch add a basic support for the D-Link DNS-325.
>
> Currently only booting via uart with kwboot is supported. The barebox
> kwboot utility doesn't work at the moment. Use kwboot utility from u-boot
> instead.
Why does kwboot does not work? There is an issue with early Kirkwood's
BootROM and UART boot mode. Just try over and over again. I also recall
modifying the timeouts may help.
> Signed-off-by: Alexander Aring <alex.aring@gmail.com>
> ---
[...]
> diff --git a/arch/arm/boards/dlink-dns325/dlink-dns325.dox b/arch/arm/boards/dlink-dns325/dlink-dns325.dox
> new file mode 100644
> index 0000000..414b2e7
> --- /dev/null
> +++ b/arch/arm/boards/dlink-dns325/dlink-dns325.dox
> @@ -0,0 +1,37 @@
> +/** @page dlink-dns325 D-Link DNS-325 NAS
> +
> +The NAS has
> +@li Kirkwood 88F6281-A1 SoC
> +@li 256 MB SDRAM
> +@li 128 MB NAND type SAMSUNG 946 K9F1G08U0B PCB0
> +@li 2 SATA interfaces
> +@li RS232 serial interface
> +@li 1 USB interface
> +@li 1 Gigabit Ethernet interface
> +@li 1 Temp Sensor G751-2f
> +@li 1 MCU Holtek HT48C06E for Power Managment
> +@li LEDs & buttons
> +
> +The NAS doesn't support NAND right now.
> +Only boot via uart with kwboot is supported.
Is it the NAS that doesn't support NAND or is it missing driver support
for barebox instead?
> +The kwboot utility of barebox doesn't work right now.
> +Instead use the u-boot kwboot utility:
See above, we should fix kwboot instead.
Sebastian
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-06-22 21:51 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-22 20:34 [RFC 1/2] kirkwood: add support for booting via oftree probe Alexander Aring
2014-06-22 20:34 ` [RFC 2/2] dns325: initial support for D-Link DNS-325 Alexander Aring
2014-06-22 21:50 ` Sebastian Hesselbarth [this message]
2014-06-23 6:48 ` Alexander Aring
2014-06-26 4:27 ` Alexander Aring
2014-06-26 6:53 ` Sebastian Hesselbarth
2014-06-26 9:14 ` Alexander Aring
2014-06-24 11:54 ` Sebastian Hesselbarth
2014-06-25 6:57 ` Sascha Hauer
2014-06-22 21:45 ` [RFC 1/2] kirkwood: add support for booting via oftree probe Sebastian Hesselbarth
2014-06-23 6:51 ` Alexander Aring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53A74FC0.7080206@gmail.com \
--to=sebastian.hesselbarth@gmail.com \
--cc=alex.aring@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox