From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-wg0-x230.google.com ([2a00:1450:400c:c00::230]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WypfV-0005se-Qo for barebox@lists.infradead.org; Sun, 22 Jun 2014 21:51:22 +0000 Received: by mail-wg0-f48.google.com with SMTP id n12so5740312wgh.31 for ; Sun, 22 Jun 2014 14:50:59 -0700 (PDT) Message-ID: <53A74FC0.7080206@gmail.com> Date: Sun, 22 Jun 2014 23:50:56 +0200 From: Sebastian Hesselbarth References: <1403469255-9019-1-git-send-email-alex.aring@gmail.com> <1403469255-9019-2-git-send-email-alex.aring@gmail.com> In-Reply-To: <1403469255-9019-2-git-send-email-alex.aring@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [RFC 2/2] dns325: initial support for D-Link DNS-325 To: Alexander Aring , barebox@lists.infradead.org On 06/22/2014 10:34 PM, Alexander Aring wrote: > This patch add a basic support for the D-Link DNS-325. > > Currently only booting via uart with kwboot is supported. The barebox > kwboot utility doesn't work at the moment. Use kwboot utility from u-boot > instead. Why does kwboot does not work? There is an issue with early Kirkwood's BootROM and UART boot mode. Just try over and over again. I also recall modifying the timeouts may help. > Signed-off-by: Alexander Aring > --- [...] > diff --git a/arch/arm/boards/dlink-dns325/dlink-dns325.dox b/arch/arm/boards/dlink-dns325/dlink-dns325.dox > new file mode 100644 > index 0000000..414b2e7 > --- /dev/null > +++ b/arch/arm/boards/dlink-dns325/dlink-dns325.dox > @@ -0,0 +1,37 @@ > +/** @page dlink-dns325 D-Link DNS-325 NAS > + > +The NAS has > +@li Kirkwood 88F6281-A1 SoC > +@li 256 MB SDRAM > +@li 128 MB NAND type SAMSUNG 946 K9F1G08U0B PCB0 > +@li 2 SATA interfaces > +@li RS232 serial interface > +@li 1 USB interface > +@li 1 Gigabit Ethernet interface > +@li 1 Temp Sensor G751-2f > +@li 1 MCU Holtek HT48C06E for Power Managment > +@li LEDs & buttons > + > +The NAS doesn't support NAND right now. > +Only boot via uart with kwboot is supported. Is it the NAS that doesn't support NAND or is it missing driver support for barebox instead? > +The kwboot utility of barebox doesn't work right now. > +Instead use the u-boot kwboot utility: See above, we should fix kwboot instead. Sebastian _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox