From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Sascha Hauer <s.hauer@pengutronix.de>,
Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH 5/5] pinctrl: Rockchip: Add RK3568 support
Date: Wed, 9 Jun 2021 10:01:12 +0200 [thread overview]
Message-ID: <54894f02-6d26-1f31-1879-76df081f3b6d@pengutronix.de> (raw)
In-Reply-To: <20210608140545.30696-6-s.hauer@pengutronix.de>
Hello Sascha,
On 08.06.21 16:05, Sascha Hauer wrote:
> This adds support for the RK3568 SoC to the Rockchip pinctrl driver.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> drivers/pinctrl/pinctrl-rockchip.c | 354 ++++++++++++++++++++++++++++-
> 1 file changed, 347 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
> index 3bdae5c229..cee496a85a 100644
> --- a/drivers/pinctrl/pinctrl-rockchip.c
> +++ b/drivers/pinctrl/pinctrl-rockchip.c
> @@ -37,6 +37,7 @@ enum rockchip_pinctrl_type {
> RK2928,
> RK3066B,
> RK3188,
> + RK3568,
> };
>
> enum rockchip_pin_bank_type {
> @@ -44,6 +45,13 @@ enum rockchip_pin_bank_type {
> RK3188_BANK0,
> };
>
> +/**
> + * Generate a bitmask for setting a value (v) with a write mask bit in hiword
> + * register 31:16 area.
> + */
> +#define WRITE_MASK_VAL(h, l, v) \
> + (GENMASK(((h) + 16), ((l) + 16)) | (((v) << (l)) & GENMASK((h), (l))))
> +
> /*
> * Encode variants of iomux registers into a type variable
> */
> @@ -78,6 +86,15 @@ enum rockchip_pin_drv_type {
> DRV_TYPE_MAX
> };
>
> +/*
> + * enum type index corresponding to rockchip_pull_list arrays index.
> + */
> +enum rockchip_pin_pull_type {
> + PULL_TYPE_IO_DEFAULT = 0,
> + PULL_TYPE_IO_1V8_ONLY,
> + PULL_TYPE_MAX
> +};
> +
> /**
> * struct rockchip_drv
> * @drv_type: drive strength variant using rockchip_perpin_drv_type
> @@ -211,6 +228,110 @@ enum {
> RK_GPIO_EXT_PORT = 0x50,
> };
>
> +/* GPIO registers */
> +enum {
> + RK_GPIOV2_DR_L = 0x00,
> + RK_GPIOV2_DR_H = 0x04,
> + RK_GPIOV2_DDR_L = 0x08,
> + RK_GPIOV2_DDR_H = 0x0c,
> +};
> +
> +static struct rockchip_pin_bank *gc_to_rockchip_pinctrl(struct gpio_chip *gc)
> +{
> + struct bgpio_chip *bgc = to_bgpio_chip(gc);
> +
> + return container_of(bgc, struct rockchip_pin_bank, bgpio_chip);
> +}
> +
> +static int rockchip_gpiov2_direction_input(struct gpio_chip *gc, unsigned int gpio)
> +{
> + struct rockchip_pin_bank *bank = gc_to_rockchip_pinctrl(gc);
> + u32 mask;
> +
> + mask = 1 << (16 + (gpio % 16));
> +
> + if (gpio < 16)
> + writel(mask, bank->reg_base + RK_GPIOV2_DDR_L);
> + else
> + writel(mask, bank->reg_base + RK_GPIOV2_DDR_H);
> +
> + return 0;
> +}
> +
> +static int rockchip_gpiov2_get_direction(struct gpio_chip *gc, unsigned int gpio)
> +{
> + struct rockchip_pin_bank *bank = gc_to_rockchip_pinctrl(gc);
> + u32 r;
> +
> + if (gpio < 16)
> + r = readl(bank->reg_base + RK_GPIOV2_DDR_L);
> + else
> + r = readl(bank->reg_base + RK_GPIOV2_DDR_H);
> +
> + return r & BIT(gpio % 16) ? GPIOF_DIR_OUT : GPIOF_DIR_IN;
> +}
> +
> +static void rockchip_gpiov2_set_value(struct gpio_chip *gc, unsigned int gpio,
> + int val)
> +{
> + struct rockchip_pin_bank *bank = gc_to_rockchip_pinctrl(gc);
> + u32 mask, vval = 0;
> +
> + mask = 1 << (16 + (gpio % 16));
> + if (val)
> + vval = 1 << (gpio % 16);
> +
> + if (gpio < 16)
> + writel(mask | vval, bank->reg_base + RK_GPIOV2_DR_L);
> + else
> + writel(mask | vval, bank->reg_base + RK_GPIOV2_DR_H);
> +}
> +
> +static int rockchip_gpiov2_direction_output(struct gpio_chip *gc,
> + unsigned int gpio, int val)
> +{
> + struct rockchip_pin_bank *bank = gc_to_rockchip_pinctrl(gc);
> + u32 mask, out, vval = 0;
> +
> + mask = 1 << (16 + (gpio % 16));
> + out = 1 << (gpio % 16);
> + if (val)
> + vval = 1 << (gpio % 16);
> +
> + if (gpio < 16) {
> + writel(mask | vval, bank->reg_base + RK_GPIOV2_DR_L);
> + writel(mask | out, bank->reg_base + RK_GPIOV2_DDR_L);
> + } else {
> + writel(mask | vval, bank->reg_base + RK_GPIOV2_DR_H);
> + writel(mask | out, bank->reg_base + RK_GPIOV2_DDR_H);
> + }
> +
> + return 0;
> +}
> +
> +static int rockchip_gpiov2_get_value(struct gpio_chip *gc, unsigned int gpio)
> +{
> + struct rockchip_pin_bank *bank = gc_to_rockchip_pinctrl(gc);
> + u32 mask, r;
> +
> + mask = 1 << (gpio % 16);
> +
> + if (gpio < 16)
> + r = readl(bank->reg_base + RK_GPIOV2_DR_L);
> + else
> + r = readl(bank->reg_base + RK_GPIOV2_DR_L);
> +
> + return r & mask ? 1 : 0;
> +}
> +
> +static struct gpio_ops rockchip_gpio_ops = {
> + .direction_input = rockchip_gpiov2_direction_input,
> + .direction_output = rockchip_gpiov2_direction_output,
> + .get = rockchip_gpiov2_get_value,
> + .set = rockchip_gpiov2_set_value,
> + .get_direction = rockchip_gpiov2_get_direction,
> +};
> +
> static int rockchip_gpiolib_register(struct device_d *dev,
> struct rockchip_pinctrl *info)
> {
> @@ -221,6 +342,8 @@ static int rockchip_gpiolib_register(struct device_d *dev,
> int i;
>
> for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
> + struct gpio_chip *gpio = &bank->bgpio_chip.gc;
> +
> if (!bank->valid) {
> dev_warn(dev, "bank %s is not valid\n", bank->name);
> continue;
> @@ -228,12 +351,24 @@ static int rockchip_gpiolib_register(struct device_d *dev,
>
> reg_base = bank->reg_base;
>
> - ret = bgpio_init(&bank->bgpio_chip, dev, 4,
> - reg_base + RK_GPIO_EXT_PORT,
> - reg_base + RK_GPIO_SWPORT_DR, NULL,
> - reg_base + RK_GPIO_SWPORT_DDR, NULL, 0);
> - if (ret)
> - goto fail;
> + if (ctrl->type == RK3568) {
> + gpio->ngpio = 32;
> + gpio->dev = dev;
> + gpio->ops = &rockchip_gpio_ops;
> + gpio->base = of_alias_get_id(bank->of_node, "gpio");
> + if (gpio->base < 0)
> + return -EINVAL;
> + gpio->base *= 32;
> + } else {
> + ret = bgpio_init(&bank->bgpio_chip, dev, 4,
> + reg_base + RK_GPIO_EXT_PORT,
> + reg_base + RK_GPIO_SWPORT_DR, NULL,
> + reg_base + RK_GPIO_SWPORT_DDR, NULL, 0);
> + if (ret)
> + goto fail;
> + }
> +
> + bank->bgpio_chip.gc.dev = of_find_device_by_node(bank->of_node);
>
> bank->bgpio_chip.gc.ngpio = bank->nr_pins;
> ret = gpiochip_add(&bank->bgpio_chip.gc);
> @@ -340,6 +475,63 @@ static void rk3188_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
> }
> }
>
> +#define RK3568_PULL_PMU_OFFSET 0x20
> +#define RK3568_PULL_GRF_OFFSET 0x80
> +#define RK3568_PULL_BITS_PER_PIN 2
> +#define RK3568_PULL_PINS_PER_REG 8
> +#define RK3568_PULL_BANK_STRIDE 0x10
> +
> +static void rk3568_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
> + int pin_num, void __iomem **reg,
> + u8 *bit)
> +{
> + struct rockchip_pinctrl *info = bank->drvdata;
> +
> + if (bank->bank_num == 0) {
> + *reg = info->reg_pmu + RK3568_PULL_PMU_OFFSET;
> + *reg += bank->bank_num * RK3568_PULL_BANK_STRIDE;
> + *reg += ((pin_num / RK3568_PULL_PINS_PER_REG) * 4);
> +
> + *bit = pin_num % RK3568_PULL_PINS_PER_REG;
> + *bit *= RK3568_PULL_BITS_PER_PIN;
> + } else {
> + *reg = info->reg_base + RK3568_PULL_GRF_OFFSET;
> + *reg += (bank->bank_num - 1) * RK3568_PULL_BANK_STRIDE;
> + *reg += ((pin_num / RK3568_PULL_PINS_PER_REG) * 4);
> +
> + *bit = (pin_num % RK3568_PULL_PINS_PER_REG);
> + *bit *= RK3568_PULL_BITS_PER_PIN;
> + }
> +}
> +
> +#define RK3568_DRV_PMU_OFFSET 0x70
> +#define RK3568_DRV_GRF_OFFSET 0x200
> +#define RK3568_DRV_BITS_PER_PIN 8
> +#define RK3568_DRV_PINS_PER_REG 2
> +#define RK3568_DRV_BANK_STRIDE 0x40
> +
> +static void rk3568_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
> + int pin_num, void __iomem **reg, u8 *bit)
> +{
> + struct rockchip_pinctrl *info = bank->drvdata;
> +
> + /* The first 32 pins of the first bank are located in PMU */
> + if (bank->bank_num == 0) {
> + *reg = info->reg_pmu + RK3568_DRV_PMU_OFFSET;
> + *reg += ((pin_num / RK3568_DRV_PINS_PER_REG) * 4);
> +
> + *bit = pin_num % RK3568_DRV_PINS_PER_REG;
> + *bit *= RK3568_DRV_BITS_PER_PIN;
> + } else {
> + *reg = info->reg_base + RK3568_DRV_GRF_OFFSET;
> + *reg += (bank->bank_num - 1) * RK3568_DRV_BANK_STRIDE;
> + *reg += ((pin_num / RK3568_DRV_PINS_PER_REG) * 4);
> +
> + *bit = (pin_num % RK3568_DRV_PINS_PER_REG);
> + *bit *= RK3568_DRV_BITS_PER_PIN;
> + }
> +}
> +
> static struct rockchip_mux_route_data rk3188_mux_route_data[] = {
> RK_MUXROUTE_SAME(0, RK_PD0, 1, 0xa0, BIT(16 + 11)), /* non-iomuxed emmc/flash pins on flash-dqs */
> RK_MUXROUTE_SAME(0, RK_PD0, 2, 0xa0, BIT(16 + 11) | BIT(11)), /* non-iomuxed emmc/flash pins on emmc-clk */
> @@ -458,6 +650,7 @@ static int rockchip_pinctrl_set_pull(struct rockchip_pin_bank *bank,
> writel(data, reg);
> break;
> case RK3188:
> + case RK3568:
> data = ((1 << RK3188_PULL_BITS_PER_PIN) - 1) << (bit + 16);
> data |= pull << bit;
Linux does this for pull (== ret):
/*
* In the TRM, pull-up being 1 for everything except the GPIO0_D0-D6,
* where that pull up value becomes 3.
*/
if (ctrl->type == RK3568 && bank->bank_num == 0 && pin_num >= 27 && pin_num <= 30) {
if (ret == 1)
ret = 3;
}
Should we do this too?
> writel(data, reg);
> @@ -499,6 +692,11 @@ static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank,
> bank->bank_num, pin_num, strength);
>
> ctrl->drv_calc_reg(bank, pin_num, ®, &bit);
> + if (ctrl->type == RK3568) {
> + rmask_bits = RK3568_DRV_BITS_PER_PIN;
> + ret = (1 << (strength + 1)) - 1;
> + goto config;
> + }
>
> ret = -EINVAL;
> for (i = 0; i < ARRAY_SIZE(rockchip_perpin_drv_list[drv_type]); i++) {
> @@ -574,6 +772,7 @@ static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank,
> return -EINVAL;
> }
>
> +config:
> /* enable the write to the equivalent lower bits */
> data = ((1 << rmask_bits) - 1) << (bit + 16);
> rmask = data | (data >> 16);
> @@ -800,6 +999,8 @@ static int rockchip_pinctrl_probe(struct device_d *dev)
> struct rockchip_pin_ctrl *ctrl;
> int ret;
>
> + of_platform_populate(dev->device_node, NULL, NULL);
> +
> info = xzalloc(sizeof(struct rockchip_pinctrl));
>
> ctrl = rockchip_pinctrl_get_soc_data(info, dev);
> @@ -903,6 +1104,140 @@ static struct rockchip_pin_ctrl rk3188_pin_ctrl = {
> .pull_calc_reg = rk3188_calc_pull_reg_and_bit,
> };
>
> +static struct rockchip_mux_route_data rk3568_mux_route_data[] = {
> + RK_MUXROUTE_PMU(0, RK_PB7, 1, 0x0110, WRITE_MASK_VAL(1, 0, 0)), /* PWM0 IO mux M0 */
> + RK_MUXROUTE_PMU(0, RK_PC7, 2, 0x0110, WRITE_MASK_VAL(1, 0, 1)), /* PWM0 IO mux M1 */
> + RK_MUXROUTE_PMU(0, RK_PC0, 1, 0x0110, WRITE_MASK_VAL(3, 2, 0)), /* PWM1 IO mux M0 */
> + RK_MUXROUTE_PMU(0, RK_PB5, 4, 0x0110, WRITE_MASK_VAL(3, 2, 1)), /* PWM1 IO mux M1 */
> + RK_MUXROUTE_PMU(0, RK_PC1, 1, 0x0110, WRITE_MASK_VAL(5, 4, 0)), /* PWM2 IO mux M0 */
> + RK_MUXROUTE_PMU(0, RK_PB6, 4, 0x0110, WRITE_MASK_VAL(5, 4, 1)), /* PWM2 IO mux M1 */
> + RK_MUXROUTE_PMU(0, RK_PB3, 2, 0x0300, WRITE_MASK_VAL(0, 0, 0)), /* CAN0 IO mux M0 */
> + RK_MUXROUTE_GRF(2, RK_PA1, 4, 0x0300, WRITE_MASK_VAL(0, 0, 1)), /* CAN0 IO mux M1 */
> + RK_MUXROUTE_GRF(1, RK_PA1, 3, 0x0300, WRITE_MASK_VAL(2, 2, 0)), /* CAN1 IO mux M0 */
> + RK_MUXROUTE_GRF(4, RK_PC3, 3, 0x0300, WRITE_MASK_VAL(2, 2, 1)), /* CAN1 IO mux M1 */
> + RK_MUXROUTE_GRF(4, RK_PB5, 3, 0x0300, WRITE_MASK_VAL(4, 4, 0)), /* CAN2 IO mux M0 */
> + RK_MUXROUTE_GRF(2, RK_PB2, 4, 0x0300, WRITE_MASK_VAL(4, 4, 1)), /* CAN2 IO mux M1 */
> + RK_MUXROUTE_GRF(4, RK_PC4, 1, 0x0300, WRITE_MASK_VAL(6, 6, 0)), /* HPDIN IO mux M0 */
> + RK_MUXROUTE_PMU(0, RK_PC2, 2, 0x0300, WRITE_MASK_VAL(6, 6, 1)), /* HPDIN IO mux M1 */
> + RK_MUXROUTE_GRF(3, RK_PB1, 3, 0x0300, WRITE_MASK_VAL(8, 8, 0)), /* GMAC1 IO mux M0 */
> + RK_MUXROUTE_GRF(4, RK_PA7, 3, 0x0300, WRITE_MASK_VAL(8, 8, 1)), /* GMAC1 IO mux M1 */
> + RK_MUXROUTE_GRF(4, RK_PD1, 1, 0x0300, WRITE_MASK_VAL(10, 10, 0)), /* HDMITX IO mux M0 */
> + RK_MUXROUTE_PMU(0, RK_PC7, 1, 0x0300, WRITE_MASK_VAL(10, 10, 1)), /* HDMITX IO mux M1 */
> + RK_MUXROUTE_PMU(0, RK_PB6, 1, 0x0300, WRITE_MASK_VAL(14, 14, 0)), /* I2C2 IO mux M0 */
> + RK_MUXROUTE_GRF(4, RK_PB4, 1, 0x0300, WRITE_MASK_VAL(14, 14, 1)), /* I2C2 IO mux M1 */
> + RK_MUXROUTE_GRF(1, RK_PA0, 1, 0x0304, WRITE_MASK_VAL(0, 0, 0)), /* I2C3 IO mux M0 */
> + RK_MUXROUTE_GRF(3, RK_PB6, 4, 0x0304, WRITE_MASK_VAL(0, 0, 1)), /* I2C3 IO mux M1 */
> + RK_MUXROUTE_GRF(4, RK_PB2, 1, 0x0304, WRITE_MASK_VAL(2, 2, 0)), /* I2C4 IO mux M0 */
> + RK_MUXROUTE_GRF(2, RK_PB1, 2, 0x0304, WRITE_MASK_VAL(2, 2, 1)), /* I2C4 IO mux M1 */
> + RK_MUXROUTE_GRF(3, RK_PB4, 4, 0x0304, WRITE_MASK_VAL(4, 4, 0)), /* I2C5 IO mux M0 */
> + RK_MUXROUTE_GRF(4, RK_PD0, 2, 0x0304, WRITE_MASK_VAL(4, 4, 1)), /* I2C5 IO mux M1 */
> + RK_MUXROUTE_GRF(3, RK_PB1, 5, 0x0304, WRITE_MASK_VAL(14, 14, 0)), /* PWM8 IO mux M0 */
> + RK_MUXROUTE_GRF(1, RK_PD5, 4, 0x0304, WRITE_MASK_VAL(14, 14, 1)), /* PWM8 IO mux M1 */
> + RK_MUXROUTE_GRF(3, RK_PB2, 5, 0x0308, WRITE_MASK_VAL(0, 0, 0)), /* PWM9 IO mux M0 */
> + RK_MUXROUTE_GRF(1, RK_PD6, 4, 0x0308, WRITE_MASK_VAL(0, 0, 1)), /* PWM9 IO mux M1 */
> + RK_MUXROUTE_GRF(3, RK_PB5, 5, 0x0308, WRITE_MASK_VAL(2, 2, 0)), /* PWM10 IO mux M0 */
> + RK_MUXROUTE_GRF(2, RK_PA1, 2, 0x0308, WRITE_MASK_VAL(2, 2, 1)), /* PWM10 IO mux M1 */
> + RK_MUXROUTE_GRF(3, RK_PB6, 5, 0x0308, WRITE_MASK_VAL(4, 4, 0)), /* PWM11 IO mux M0 */
> + RK_MUXROUTE_GRF(4, RK_PC0, 3, 0x0308, WRITE_MASK_VAL(4, 4, 1)), /* PWM11 IO mux M1 */
> + RK_MUXROUTE_GRF(3, RK_PB7, 2, 0x0308, WRITE_MASK_VAL(6, 6, 0)), /* PWM12 IO mux M0 */
> + RK_MUXROUTE_GRF(4, RK_PC5, 1, 0x0308, WRITE_MASK_VAL(6, 6, 1)), /* PWM12 IO mux M1 */
> + RK_MUXROUTE_GRF(3, RK_PC0, 2, 0x0308, WRITE_MASK_VAL(8, 8, 0)), /* PWM13 IO mux M0 */
> + RK_MUXROUTE_GRF(4, RK_PC6, 1, 0x0308, WRITE_MASK_VAL(8, 8, 1)), /* PWM13 IO mux M1 */
> + RK_MUXROUTE_GRF(3, RK_PC4, 1, 0x0308, WRITE_MASK_VAL(10, 10, 0)), /* PWM14 IO mux M0 */
> + RK_MUXROUTE_GRF(4, RK_PC2, 1, 0x0308, WRITE_MASK_VAL(10, 10, 1)), /* PWM14 IO mux M1 */
> + RK_MUXROUTE_GRF(3, RK_PC5, 1, 0x0308, WRITE_MASK_VAL(12, 12, 0)), /* PWM15 IO mux M0 */
> + RK_MUXROUTE_GRF(4, RK_PC3, 1, 0x0308, WRITE_MASK_VAL(12, 12, 1)), /* PWM15 IO mux M1 */
> + RK_MUXROUTE_GRF(3, RK_PD2, 3, 0x0308, WRITE_MASK_VAL(14, 14, 0)), /* SDMMC2 IO mux M0 */
> + RK_MUXROUTE_GRF(3, RK_PA5, 5, 0x0308, WRITE_MASK_VAL(14, 14, 1)), /* SDMMC2 IO mux M1 */
> + RK_MUXROUTE_PMU(0, RK_PB5, 2, 0x030c, WRITE_MASK_VAL(0, 0, 0)), /* SPI0 IO mux M0 */
> + RK_MUXROUTE_GRF(2, RK_PD3, 3, 0x030c, WRITE_MASK_VAL(0, 0, 1)), /* SPI0 IO mux M1 */
> + RK_MUXROUTE_GRF(2, RK_PB5, 3, 0x030c, WRITE_MASK_VAL(2, 2, 0)), /* SPI1 IO mux M0 */
> + RK_MUXROUTE_GRF(3, RK_PC3, 3, 0x030c, WRITE_MASK_VAL(2, 2, 1)), /* SPI1 IO mux M1 */
> + RK_MUXROUTE_GRF(2, RK_PC1, 4, 0x030c, WRITE_MASK_VAL(4, 4, 0)), /* SPI2 IO mux M0 */
> + RK_MUXROUTE_GRF(3, RK_PA0, 3, 0x030c, WRITE_MASK_VAL(4, 4, 1)), /* SPI2 IO mux M1 */
> + RK_MUXROUTE_GRF(4, RK_PB3, 4, 0x030c, WRITE_MASK_VAL(6, 6, 0)), /* SPI3 IO mux M0 */
> + RK_MUXROUTE_GRF(4, RK_PC2, 2, 0x030c, WRITE_MASK_VAL(6, 6, 1)), /* SPI3 IO mux M1 */
> + RK_MUXROUTE_GRF(2, RK_PB4, 2, 0x030c, WRITE_MASK_VAL(8, 8, 0)), /* UART1 IO mux M0 */
> + RK_MUXROUTE_PMU(0, RK_PD1, 1, 0x030c, WRITE_MASK_VAL(8, 8, 1)), /* UART1 IO mux M1 */
> + RK_MUXROUTE_PMU(0, RK_PD1, 1, 0x030c, WRITE_MASK_VAL(10, 10, 0)), /* UART2 IO mux M0 */
> + RK_MUXROUTE_GRF(1, RK_PD5, 2, 0x030c, WRITE_MASK_VAL(10, 10, 1)), /* UART2 IO mux M1 */
> + RK_MUXROUTE_GRF(1, RK_PA1, 2, 0x030c, WRITE_MASK_VAL(12, 12, 0)), /* UART3 IO mux M0 */
> + RK_MUXROUTE_GRF(3, RK_PB7, 4, 0x030c, WRITE_MASK_VAL(12, 12, 1)), /* UART3 IO mux M1 */
> + RK_MUXROUTE_GRF(1, RK_PA6, 2, 0x030c, WRITE_MASK_VAL(14, 14, 0)), /* UART4 IO mux M0 */
> + RK_MUXROUTE_GRF(3, RK_PB2, 4, 0x030c, WRITE_MASK_VAL(14, 14, 1)), /* UART4 IO mux M1 */
> + RK_MUXROUTE_GRF(2, RK_PA2, 3, 0x0310, WRITE_MASK_VAL(0, 0, 0)), /* UART5 IO mux M0 */
> + RK_MUXROUTE_GRF(3, RK_PC2, 4, 0x0310, WRITE_MASK_VAL(0, 0, 1)), /* UART5 IO mux M1 */
> + RK_MUXROUTE_GRF(2, RK_PA4, 3, 0x0310, WRITE_MASK_VAL(2, 2, 0)), /* UART6 IO mux M0 */
> + RK_MUXROUTE_GRF(1, RK_PD5, 3, 0x0310, WRITE_MASK_VAL(2, 2, 1)), /* UART6 IO mux M1 */
> + RK_MUXROUTE_GRF(2, RK_PA6, 3, 0x0310, WRITE_MASK_VAL(5, 4, 0)), /* UART7 IO mux M0 */
> + RK_MUXROUTE_GRF(3, RK_PC4, 4, 0x0310, WRITE_MASK_VAL(5, 4, 1)), /* UART7 IO mux M1 */
> + RK_MUXROUTE_GRF(4, RK_PA2, 4, 0x0310, WRITE_MASK_VAL(5, 4, 2)), /* UART7 IO mux M2 */
> + RK_MUXROUTE_GRF(2, RK_PC5, 3, 0x0310, WRITE_MASK_VAL(6, 6, 0)), /* UART8 IO mux M0 */
> + RK_MUXROUTE_GRF(2, RK_PD7, 4, 0x0310, WRITE_MASK_VAL(6, 6, 1)), /* UART8 IO mux M1 */
> + RK_MUXROUTE_GRF(2, RK_PB0, 3, 0x0310, WRITE_MASK_VAL(9, 8, 0)), /* UART9 IO mux M0 */
> + RK_MUXROUTE_GRF(4, RK_PC5, 4, 0x0310, WRITE_MASK_VAL(9, 8, 1)), /* UART9 IO mux M1 */
> + RK_MUXROUTE_GRF(4, RK_PA4, 4, 0x0310, WRITE_MASK_VAL(9, 8, 2)), /* UART9 IO mux M2 */
> + RK_MUXROUTE_GRF(1, RK_PA2, 1, 0x0310, WRITE_MASK_VAL(11, 10, 0)), /* I2S1 IO mux M0 */
> + RK_MUXROUTE_GRF(3, RK_PC6, 4, 0x0310, WRITE_MASK_VAL(11, 10, 1)), /* I2S1 IO mux M1 */
> + RK_MUXROUTE_GRF(2, RK_PD0, 5, 0x0310, WRITE_MASK_VAL(11, 10, 2)), /* I2S1 IO mux M2 */
> + RK_MUXROUTE_GRF(2, RK_PC1, 1, 0x0310, WRITE_MASK_VAL(12, 12, 0)), /* I2S2 IO mux M0 */
> + RK_MUXROUTE_GRF(4, RK_PB6, 5, 0x0310, WRITE_MASK_VAL(12, 12, 1)), /* I2S2 IO mux M1 */
> + RK_MUXROUTE_GRF(3, RK_PA2, 4, 0x0310, WRITE_MASK_VAL(14, 14, 0)), /* I2S3 IO mux M0 */
> + RK_MUXROUTE_GRF(4, RK_PC2, 5, 0x0310, WRITE_MASK_VAL(14, 14, 1)), /* I2S3 IO mux M1 */
> + RK_MUXROUTE_GRF(1, RK_PA4, 3, 0x0314, WRITE_MASK_VAL(1, 0, 0)), /* PDM IO mux M0 */
> + RK_MUXROUTE_GRF(1, RK_PA6, 3, 0x0314, WRITE_MASK_VAL(1, 0, 0)), /* PDM IO mux M0 */
> + RK_MUXROUTE_GRF(3, RK_PD6, 5, 0x0314, WRITE_MASK_VAL(1, 0, 1)), /* PDM IO mux M1 */
> + RK_MUXROUTE_GRF(4, RK_PA0, 4, 0x0314, WRITE_MASK_VAL(1, 0, 1)), /* PDM IO mux M1 */
> + RK_MUXROUTE_GRF(3, RK_PC4, 5, 0x0314, WRITE_MASK_VAL(1, 0, 2)), /* PDM IO mux M2 */
> + RK_MUXROUTE_PMU(0, RK_PA5, 3, 0x0314, WRITE_MASK_VAL(3, 2, 0)), /* PCIE20 IO mux M0 */
> + RK_MUXROUTE_GRF(2, RK_PD0, 4, 0x0314, WRITE_MASK_VAL(3, 2, 1)), /* PCIE20 IO mux M1 */
> + RK_MUXROUTE_GRF(1, RK_PB0, 4, 0x0314, WRITE_MASK_VAL(3, 2, 2)), /* PCIE20 IO mux M2 */
> + RK_MUXROUTE_PMU(0, RK_PA4, 3, 0x0314, WRITE_MASK_VAL(5, 4, 0)), /* PCIE30X1 IO mux M0 */
> + RK_MUXROUTE_GRF(2, RK_PD2, 4, 0x0314, WRITE_MASK_VAL(5, 4, 1)), /* PCIE30X1 IO mux M1 */
> + RK_MUXROUTE_GRF(1, RK_PA5, 4, 0x0314, WRITE_MASK_VAL(5, 4, 2)), /* PCIE30X1 IO mux M2 */
> + RK_MUXROUTE_PMU(0, RK_PA6, 2, 0x0314, WRITE_MASK_VAL(7, 6, 0)), /* PCIE30X2 IO mux M0 */
> + RK_MUXROUTE_GRF(2, RK_PD4, 4, 0x0314, WRITE_MASK_VAL(7, 6, 1)), /* PCIE30X2 IO mux M1 */
> + RK_MUXROUTE_GRF(4, RK_PC2, 4, 0x0314, WRITE_MASK_VAL(7, 6, 2)), /* PCIE30X2 IO mux M2 */
> +};
> +
> +static struct rockchip_pin_bank rk3568_pin_banks[] = {
> + PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU | IOMUX_WIDTH_4BIT,
> + IOMUX_SOURCE_PMU | IOMUX_WIDTH_4BIT,
> + IOMUX_SOURCE_PMU | IOMUX_WIDTH_4BIT,
> + IOMUX_SOURCE_PMU | IOMUX_WIDTH_4BIT),
> + PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_WIDTH_4BIT,
> + IOMUX_WIDTH_4BIT,
> + IOMUX_WIDTH_4BIT,
> + IOMUX_WIDTH_4BIT),
> + PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", IOMUX_WIDTH_4BIT,
> + IOMUX_WIDTH_4BIT,
> + IOMUX_WIDTH_4BIT,
> + IOMUX_WIDTH_4BIT),
> + PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", IOMUX_WIDTH_4BIT,
> + IOMUX_WIDTH_4BIT,
> + IOMUX_WIDTH_4BIT,
> + IOMUX_WIDTH_4BIT),
> + PIN_BANK_IOMUX_FLAGS(4, 32, "gpio4", IOMUX_WIDTH_4BIT,
> + IOMUX_WIDTH_4BIT,
> + IOMUX_WIDTH_4BIT,
> + IOMUX_WIDTH_4BIT),
> +};
> +
> +static struct rockchip_pin_ctrl rk3568_pin_ctrl = {
> + .pin_banks = rk3568_pin_banks,
> + .nr_banks = ARRAY_SIZE(rk3568_pin_banks),
> + .label = "RK3568-GPIO",
> + .type = RK3568,
> + .grf_mux_offset = 0x0,
> + .pmu_mux_offset = 0x0,
> + .grf_drv_offset = 0x0200,
> + .pmu_drv_offset = 0x0070,
> + .iomux_routes = rk3568_mux_route_data,
> + .niomux_routes = ARRAY_SIZE(rk3568_mux_route_data),
> + .pull_calc_reg = rk3568_calc_pull_reg_and_bit,
> + .drv_calc_reg = rk3568_calc_drv_reg_and_bit,
> +};
> +
> static struct of_device_id rockchip_pinctrl_dt_match[] = {
> {
> .compatible = "rockchip,rk2928-pinctrl",
> @@ -919,7 +1254,12 @@ static struct of_device_id rockchip_pinctrl_dt_match[] = {
> {
> .compatible = "rockchip,rk3188-pinctrl",
> .data = &rk3188_pin_ctrl,
> - }, {
> + },
> + {
> + .compatible = "rockchip,rk3568-pinctrl",
> + .data = &rk3568_pin_ctrl
> + },
> + {
> /* sentinel */
> }
> };
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-06-09 8:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-08 14:05 [PATCH 0/5] RK3568 pinctrl Sascha Hauer
2021-06-08 14:05 ` [PATCH 1/5] pinctrl: Rockchip: rename mux_offset to grf_mux_offset Sascha Hauer
2021-06-08 14:05 ` [PATCH 2/5] pinctrl: Rockchip: print resource_size_t with %pa Sascha Hauer
2021-06-08 14:05 ` [PATCH 3/5] pinctrl: Rockchip: Update from Linux Sascha Hauer
2021-06-08 14:05 ` [PATCH 4/5] pinctrl: Rockchip: implement drive strength setting Sascha Hauer
2021-06-09 8:13 ` Ahmad Fatoum
2021-06-08 14:05 ` [PATCH 5/5] pinctrl: Rockchip: Add RK3568 support Sascha Hauer
2021-06-09 8:01 ` Ahmad Fatoum [this message]
2021-06-09 9:41 ` Sascha Hauer
2021-06-09 8:11 ` Ahmad Fatoum
2021-06-09 9:45 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54894f02-6d26-1f31-1879-76df081f3b6d@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox