From: Bo Shen <voice.shen@atmel.com>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>,
Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] ARM: atmel: sama5d3xek: let gmac auto detect phy id
Date: Thu, 22 Jan 2015 14:20:33 +0800 [thread overview]
Message-ID: <54C096B1.2080000@atmel.com> (raw)
In-Reply-To: <54C086AA.9030605@atmel.com>
On 01/22/2015 01:12 PM, Bo Shen wrote:
> Hi J,
>
> On 01/22/2015 12:35 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
>>
>>> On Jan 21, 2015, at 11:07 PM, Sascha Hauer <s.hauer@pengutronix.de>
>>> wrote:
>>>
>>> On Mon, Jan 19, 2015 at 12:39:39PM +0100, Jean-Christophe
>>> PLAGNIOL-VILLARD wrote:
>>>> On 17:54 Mon 19 Jan , Bo Shen wrote:
>>>>> On the SAMA5D33 and SAMA5D35 the GMAC PHY ID is 1 while not 7.
>>>>> So, let the GMAC auto detect phy id, or else hard code to 7,
>>>>> it can not work on these two boards.
>>>>>
>>>>> Signed-off-by: Bo Shen <voice.shen@atmel.com>
>>>>> ---
>>>>>
>>>>> arch/arm/boards/sama5d3xek/init.c | 2 +-
>>>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/arch/arm/boards/sama5d3xek/init.c
>>>>> b/arch/arm/boards/sama5d3xek/init.c
>>>>> index 49d2b37..0b83147 100644
>>>>> --- a/arch/arm/boards/sama5d3xek/init.c
>>>>> +++ b/arch/arm/boards/sama5d3xek/init.c
>>>>> @@ -123,7 +123,7 @@ static void ek_add_device_nand(void) {}
>>>>> #if defined(CONFIG_DRIVER_NET_MACB)
>>>>> static struct macb_platform_data gmac_pdata = {
>>>>> .phy_interface = PHY_INTERFACE_MODE_RGMII,
>>>>> - .phy_addr = 7,
>>>>> + .phy_addr = -1,
>>>> IIRC the auto detect do not work on all board
>>>> NACK
>>>
>>> Please give us some more information why this doesn't work or on which
>>> boards this doesn't work. Rejecting patches with 'IIRC' just blocks the
>>> patch without giving a clue what else should be done.
>>
>> This is the same board but différent SoC Module
>>
>> Bo MUST test it on all of them before do such modification
>
> Yes, I do this kind of test.
>
>> IIRC the phy is detect on addr 1 instead of 7 on some CPU Module
>
> Yes, as the commit message specified, the phy address of SAMA5D33 and
> SAMA5D35 are 1. So, let the GMAC to auto detect the phy address, or else
> using the hard coded phy address 7, then the network won't work on
> SAMA5D33 and SAMA5D35 module.
>
>> Best Regards,
>> J.
>>>
>>> Sascha
>>>
>>> --
>>> Pengutronix e.K.
>>> | |
>>> Industrial Linux Solutions |
>>> http://www.pengutronix.de/ |
>>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone:
>>> +49-5121-206917-0 |
>>> Amtsgericht Hildesheim, HRA 2686 | Fax:
>>> +49-5121-206917-5555 |
>>
>
> Best Regards,
> Bo Shen
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2015-01-22 6:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-19 9:54 Bo Shen
2015-01-19 11:39 ` Jean-Christophe PLAGNIOL-VILLARD
2015-01-20 0:56 ` Bo Shen
2015-01-21 15:07 ` Sascha Hauer
2015-01-22 4:35 ` Jean-Christophe PLAGNIOL-VILLARD
[not found] ` <54C086AA.9030605@atmel.com>
2015-01-22 6:20 ` Bo Shen [this message]
2015-01-22 6:20 ` Bo Shen
2015-01-23 7:36 ` Sascha Hauer
2015-01-23 8:00 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54C096B1.2080000@atmel.com \
--to=voice.shen@atmel.com \
--cc=barebox@lists.infradead.org \
--cc=plagnioj@jcrosoft.com \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox