mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Bo Shen <voice.shen@atmel.com>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>,
	Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] ARM: atmel: sama5d3xek: let gmac auto detect phy id
Date: Thu, 22 Jan 2015 14:20:49 +0800	[thread overview]
Message-ID: <54C096C1.9000604@atmel.com> (raw)
In-Reply-To: <7BD9F41A-FC1D-415B-A3C0-B0555B7B15CA@jcrosoft.com>

Hi J,

On 01/22/2015 12:35 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
>
>> On Jan 21, 2015, at 11:07 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
>>
>> On Mon, Jan 19, 2015 at 12:39:39PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
>>> On 17:54 Mon 19 Jan     , Bo Shen wrote:
>>>> On the SAMA5D33 and SAMA5D35 the GMAC PHY ID is 1 while not 7.
>>>> So, let the GMAC auto detect phy id, or else hard code to 7,
>>>> it can not work on these two boards.
>>>>
>>>> Signed-off-by: Bo Shen <voice.shen@atmel.com>
>>>> ---
>>>>
>>>> arch/arm/boards/sama5d3xek/init.c | 2 +-
>>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm/boards/sama5d3xek/init.c b/arch/arm/boards/sama5d3xek/init.c
>>>> index 49d2b37..0b83147 100644
>>>> --- a/arch/arm/boards/sama5d3xek/init.c
>>>> +++ b/arch/arm/boards/sama5d3xek/init.c
>>>> @@ -123,7 +123,7 @@ static void ek_add_device_nand(void) {}
>>>> #if defined(CONFIG_DRIVER_NET_MACB)
>>>> static struct macb_platform_data gmac_pdata = {
>>>> 	.phy_interface = PHY_INTERFACE_MODE_RGMII,
>>>> -	.phy_addr = 7,
>>>> +	.phy_addr = -1,
>>> IIRC the auto detect do not work on all board
>>> NACK
>>
>> Please give us some more information why this doesn't work or on which
>> boards this doesn't work. Rejecting patches with 'IIRC' just blocks the
>> patch without giving a clue what else should be done.
>
> This is the same board but différent SoC Module
>
> Bo MUST test it on all of them before do such modification

Yes, I do this kind of test.

> IIRC the phy is detect on addr 1 instead of 7 on some CPU Module

Yes, as the commit message specified, the phy address of SAMA5D33 and 
SAMA5D35 are 1. So, let the GMAC to auto detect the phy address, or else 
using the hard coded phy address 7, then the network won't work on 
SAMA5D33 and SAMA5D35 module.

> Best Regards,
> J.
>>
>> Sascha
>>
>> --
>> Pengutronix e.K.                           |                             |
>> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
>> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
>

Best Regards,
Bo Shen

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2015-01-22  6:21 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-19  9:54 Bo Shen
2015-01-19 11:39 ` Jean-Christophe PLAGNIOL-VILLARD
2015-01-20  0:56   ` Bo Shen
2015-01-21 15:07   ` Sascha Hauer
2015-01-22  4:35     ` Jean-Christophe PLAGNIOL-VILLARD
     [not found]       ` <54C086AA.9030605@atmel.com>
2015-01-22  6:20         ` Bo Shen
2015-01-22  6:20       ` Bo Shen [this message]
2015-01-23  7:36       ` Sascha Hauer
2015-01-23  8:00         ` Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54C096C1.9000604@atmel.com \
    --to=voice.shen@atmel.com \
    --cc=barebox@lists.infradead.org \
    --cc=plagnioj@jcrosoft.com \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox