mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Bo Shen <voice.shen@atmel.com>
To: Doug Brainard <dbrainard@brainardinsight.com>,
	barebox@lists.infradead.org
Subject: Re: [PATCH 1/2] SAMA5D4EK - Now mostly supports booting Android from NAND.
Date: Wed, 11 Feb 2015 09:30:18 +0800	[thread overview]
Message-ID: <54DAB0AA.7090402@atmel.com> (raw)
In-Reply-To: <1423578481-25230-1-git-send-email-dbrainard@brainardinsight.com>

Hi Doug Brainard,

On 02/10/2015 10:28 PM, Doug Brainard wrote:
> ---
>   arch/arm/boards/sama5d4ek/env/config | 14 +++++++-------
>   1 file changed, 7 insertions(+), 7 deletions(-)

As this file will be totally discard in patch 2/2. So, I think no need 
to add this patch. And also it change the default boot setting to 
Android only.

> diff --git a/arch/arm/boards/sama5d4ek/env/config b/arch/arm/boards/sama5d4ek/env/config
> index 1007345..ee86c07 100644
> --- a/arch/arm/boards/sama5d4ek/env/config
> +++ b/arch/arm/boards/sama5d4ek/env/config
> @@ -11,16 +11,16 @@ ip=dhcp
>   #eth0.serverip=a.b.c.d
>
>   # can be either 'nfs', 'tftp', 'nor' or 'nand'
> -kernel_loc=nfs
> +kernel_loc=nand
>   # can be either 'net', 'nor', 'nand' or 'initrd'
> -rootfs_loc=net
> +rootfs_loc=nand
>   # can be either 'nfs', 'tftp', 'nand' or empty
> -oftree_loc=nfs
> +oftree_loc=nand
>
>   # can be either 'jffs2' or 'ubifs'
>   rootfs_type=ubifs
>   rootfsimage=root.$rootfs_type
> -ubiroot=rootfs
> +ubiroot=system
>
>   # The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
>   kernelimage=zImage
> @@ -29,14 +29,14 @@ kernelimage=zImage
>   #kernelimage=Image.lzo
>
>   nand_device=atmel_nand
> -nand_parts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),-(rootfs)"
> -rootfs_mtdblock_nand=7
> +nand_parts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),8M(recovery),176M(system),304M(userdata),-(cache)"
> +rootfs_mtdblock_nand=10
>
>   m25p80_parts="64k(bootstrap),384k(barebox),256k(bareboxenv),256k(bareboxenv2),128k(oftree),-(updater)"
>
>   autoboot_timeout=3
>
> -bootargs="console=ttyS0,115200"
> +bootargs="console=ttyS0,115200 ubi.mtd=8 ubi.mtd=9 init=/init androidboot.hardware=sama5-pda androidboot.lcd=wvga"
>
>   # set a fancy prompt (if support is compiled in)
>   PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m\n# "
>

Best Regards,
Bo Shen

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2015-02-11  1:33 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-10 14:28 Doug Brainard
2015-02-10 14:28 ` [PATCH 2/2] Switched SAMA5D4EK development board to the newer environment method Doug Brainard
2015-02-11  2:34   ` Bo Shen
2015-02-11  4:00     ` Doug Brainard
2015-02-11  5:06       ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-11  7:26         ` Bo Shen
2015-02-11  8:35           ` Sascha Hauer
2015-02-11  8:54             ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-11  9:12               ` Eric Bénard
2015-02-11  9:19               ` Sascha Hauer
2015-02-11 12:03                 ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-11 14:33                   ` Sascha Hauer
2015-02-11  8:43     ` Sascha Hauer
2015-02-11 16:53       ` Doug Brainard
2015-02-11 16:38     ` Doug Brainard
2015-02-11 17:39       ` Doug Brainard
2015-02-12  9:13         ` Sascha Hauer
2015-02-13  2:57           ` Doug Brainard
2015-02-13  5:32           ` Doug Brainard
2015-02-11  1:30 ` Bo Shen [this message]
2015-02-11  4:02   ` [PATCH 1/2] SAMA5D4EK - Now mostly supports booting Android from NAND Doug Brainard
2015-02-11  7:23     ` Bo Shen
2015-02-11  5:04 ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-11  7:42   ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54DAB0AA.7090402@atmel.com \
    --to=voice.shen@atmel.com \
    --cc=barebox@lists.infradead.org \
    --cc=dbrainard@brainardinsight.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox