From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Marco Felsch <m.felsch@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 12/18] ARM64: mmu: add dynamic optee memory mapping support
Date: Thu, 11 Jan 2024 16:25:03 +0100 [thread overview]
Message-ID: <5aff954f-9b2e-4249-95c9-e199fb2ba0dd@pengutronix.de> (raw)
In-Reply-To: <20240111121423.s5rul7u4v7yrv3ed@pengutronix.de>
On 11.01.24 13:14, Marco Felsch wrote:
> On 24-01-11, Ahmad Fatoum wrote:
>> On 11.01.24 12:48, Marco Felsch wrote:
>>> Use the dynamic optee memory base address for the early mapping if
>>> possible and fallback to the static mapping if the query failed.
>>>
>>> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
>>
>> This patch fails to apply on next.
>
> Argh.. I used the most recent version which is 2023.12.0 for this
> development. Shall I rebase it on next or on master?
As the series should go into next as it's not a fix, please rebase
on next. Usually, it doesn't matter, but there was recent rework
for OP-TEE for SCMI and thus it conflicts.
>
> Regards,
> Marco
>
>
>>
>>> ---
>>> arch/arm/cpu/mmu_64.c | 14 ++++++++++++--
>>> arch/arm/mach-imx/esdctl.c | 4 ++++
>>> common/Makefile | 2 +-
>>> 3 files changed, 17 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/arch/arm/cpu/mmu_64.c b/arch/arm/cpu/mmu_64.c
>>> index c6ea63e655ad..69fd2218c1fc 100644
>>> --- a/arch/arm/cpu/mmu_64.c
>>> +++ b/arch/arm/cpu/mmu_64.c
>>> @@ -20,6 +20,7 @@
>>> #include <memory.h>
>>> #include <asm/system_info.h>
>>> #include <linux/pagemap.h>
>>> +#include <tee/optee.h>
>>>
>>> #include "mmu_64.h"
>>>
>>> @@ -297,6 +298,7 @@ void dma_flush_range(void *ptr, size_t size)
>>> void mmu_early_enable(unsigned long membase, unsigned long memsize)
>>> {
>>> int el;
>>> + u64 optee_membase;
>>> unsigned long ttb = arm_mem_ttb(membase + memsize);
>>>
>>> pr_debug("enabling MMU, ttb @ 0x%08lx\n", ttb);
>>> @@ -309,8 +311,16 @@ void mmu_early_enable(unsigned long membase, unsigned long memsize)
>>> memset((void *)ttb, 0, GRANULE_SIZE);
>>>
>>> early_remap_range(0, 1UL << (BITS_PER_VA - 1), MAP_UNCACHED);
>>> - early_remap_range(membase, memsize - OPTEE_SIZE, MAP_CACHED);
>>> - early_remap_range(membase + memsize - OPTEE_SIZE, OPTEE_SIZE, MAP_FAULT);
>>> +
>>> + if (optee_get_membase(&optee_membase)) {
>>> + /* Fallback and place OP-TEE at the memory end region */
>>> + early_remap_range(membase, memsize - OPTEE_SIZE, MAP_CACHED);
>>> + early_remap_range(membase + memsize - OPTEE_SIZE, OPTEE_SIZE, MAP_FAULT);
>>> + } else {
>>> + early_remap_range(membase, memsize, MAP_CACHED);
>>> + early_remap_range(optee_membase, OPTEE_SIZE, MAP_FAULT);
>>> + }
>>> +
>>> early_remap_range(PAGE_ALIGN_DOWN((uintptr_t)_stext), PAGE_ALIGN(_etext - _stext), MAP_CACHED);
>>>
>>> mmu_enable();
>>> diff --git a/arch/arm/mach-imx/esdctl.c b/arch/arm/mach-imx/esdctl.c
>>> index ac35a2de66f1..47c43d75ec75 100644
>>> --- a/arch/arm/mach-imx/esdctl.c
>>> +++ b/arch/arm/mach-imx/esdctl.c
>>> @@ -29,6 +29,8 @@
>>> #include <mach/imx/imx8m-regs.h>
>>> #include <mach/imx/imx7-regs.h>
>>> #include <mach/imx/imx9-regs.h>
>>> +#include <mach/imx/scratch.h>
>>> +#include <tee/optee.h>
>>>
>>> struct imx_esdctl_data {
>>> unsigned long base0;
>>> @@ -1004,6 +1006,8 @@ resource_size_t imx8m_barebox_earlymem_size(unsigned buswidth)
>>>
>>> static void __noreturn imx8m_barebox_entry(void *boarddata, unsigned buswidth)
>>> {
>>> + imx8m_init_scratch_space(buswidth, false);
>>> + optee_set_membase(imx8m_scratch_get_optee_hdr());
>>> barebox_arm_entry(MX8M_DDR_CSD1_BASE_ADDR,
>>> imx8m_barebox_earlymem_size(buswidth), boarddata);
>>> }
>>> diff --git a/common/Makefile b/common/Makefile
>>> index 7fb864f61480..c31cbab9e48f 100644
>>> --- a/common/Makefile
>>> +++ b/common/Makefile
>>> @@ -80,7 +80,7 @@ obj-$(CONFIG_BAREBOX_UPDATE_IMX_NAND_FCB) += imx-bbu-nand-fcb.o
>>> obj-$(CONFIG_BOOT) += boot.o
>>> obj-$(CONFIG_SERIAL_DEV_BUS) += serdev.o
>>> obj-$(CONFIG_USBGADGET_START) += usbgadget.o
>>> -pbl-$(CONFIG_PBL_OPTEE) += optee.o
>>> +obj-pbl-$(CONFIG_PBL_OPTEE) += optee.o
>>> obj-$(CONFIG_BOOTM_OPTEE) += optee.o
>>> obj-$(CONFIG_FASTBOOT_BASE) += fastboot.o
>>>
>>
>> --
>> Pengutronix e.K. | |
>> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
>> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
>> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>>
>>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2024-01-11 15:26 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-11 11:48 [PATCH 00/18] Dynamic OP-TEE Loading Marco Felsch
2024-01-11 11:48 ` [PATCH 01/18] ARM: i.MX8M: atf: make use of imx8m*_save_bootrom_log macros Marco Felsch
2024-01-11 12:06 ` Ahmad Fatoum
2024-01-11 12:16 ` Marco Felsch
2024-01-11 15:28 ` Ahmad Fatoum
2024-01-11 11:48 ` [PATCH 02/18] ARM: i.MX8M: bundle imx-scratch code Marco Felsch
2024-01-11 11:48 ` [PATCH 03/18] ARM: i.MX8M: scratch: make imx_scratch_space private Marco Felsch
2024-01-11 11:48 ` [PATCH 04/18] ARM: i.MX8M: romapi: refactor saving the bootrom log Marco Felsch
2024-01-11 11:48 ` [PATCH 05/18] ARM: i.MX8M: scratch: add optee_hdr area Marco Felsch
2024-01-11 11:48 ` [PATCH 06/18] common: limit BOOTM_OPTEE to 32bit systems Marco Felsch
2024-01-11 11:48 ` [PATCH 07/18] common: add OPTEE_SHM_SIZE to configure optee shared memory Marco Felsch
2024-01-11 13:24 ` Marco Felsch
2024-01-11 11:48 ` [PATCH 08/18] optee: add support to verify 64-bit headers as well Marco Felsch
2024-01-11 11:48 ` [PATCH 09/18] optee: add header version check Marco Felsch
2024-01-11 11:48 ` [PATCH 10/18] optee: add helper functions to set/get the optee memory base Marco Felsch
2024-01-11 11:48 ` [PATCH 11/18] optee: optee_verify_header: constify optee_header Marco Felsch
2024-01-11 11:48 ` [PATCH 12/18] ARM64: mmu: add dynamic optee memory mapping support Marco Felsch
2024-01-11 12:07 ` Ahmad Fatoum
2024-01-11 12:14 ` Marco Felsch
2024-01-11 15:25 ` Ahmad Fatoum [this message]
2024-01-11 11:48 ` [PATCH 13/18] ARM: i.MX8M: add dynamic optee memory of-fixup support Marco Felsch
2024-01-11 11:48 ` [PATCH 14/18] drivers: tee: optee: add support for dynamic optee memory base address Marco Felsch
2024-01-11 11:48 ` [PATCH 15/18] ARM: i.MX8M: atf: add support for optee hdr parsing Marco Felsch
2024-01-11 11:48 ` [PATCH 16/18] ARM: i.MX8M: allow board code to configure the bl33 loadaddr Marco Felsch
2024-01-11 11:48 ` [PATCH 17/18] ARM: i.MX8M: cleanup MX8M*_ATF_BL33_BASE_ADDR defines Marco Felsch
2024-01-11 11:48 ` [PATCH 18/18] ARM: i.MX8M: fix optee of-fixup logic Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5aff954f-9b2e-4249-95c9-e199fb2ba0dd@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=m.felsch@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox