From: gianluca <gianlucarenzi@eurekelettronica.it>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/
Date: Mon, 26 Jun 2017 15:28:28 +0200 [thread overview]
Message-ID: <5e3f93ae-e91a-8e89-9979-e90584c5ad3d@eurekelettronica.it> (raw)
In-Reply-To: <1498466766.2414.5.camel@pengutronix.de>
On 06/26/2017 10:46 AM, Lucas Stach wrote:
> Am Montag, den 26.06.2017, 10:40 +0200 schrieb gianluca:
>> During boot I can see no output on the framebuffer on the QuadPlus
>> and
>> the kernel log have those messages:
>>
>>> [ 4.914737] ------------[ cut here ]------------
>>> [ 4.914769] WARNING: CPU: 1 PID: 17 at
>>> drivers/gpu/drm/drm_atomic_helper.c:1140
>>> drm_atomic_helper_wait_for_vblanks+0x258/0x25c
>>> [ 4.914772] [CRTC:24] vblank wait timed out
>>> [ 4.914846] Modules linked in: evdev joydev rfkill at24
>>> nvmem_imx_ocotp ci_hdrc_imx nvmem_core sx8656_ek(O) ci_hdrc
>>> udc_core ehci_hcd usbcore usbmisc_imx coda phy_mxs_usb v4l2_mem2mem
>>> panel_simple videobuf2_v4l2 imx_thermal videobuf2_dma_contig
>>> imx2_wdt videobuf2_core snd_soc_fsl_asrc flexcan can_dev
>>> videobuf2_vmalloc snd_soc_fsl_asoc_card videobuf2_memops pwm_bl
>>> pwm_imx snd_ac97_codec backlight leds_gpio
>>> [ 4.914856] CPU: 1 PID: 17 Comm: kworker/1:0 Tainted:
>>> G O 4.9.7-EK20170623 #1
>>> [ 4.914859] Hardware name: Freescale i.MX6 Quad/DualLite (Device
>>> Tree)
>>> [ 4.914875] Workqueue: events deferred_probe_work_func
>>> [ 4.914900] [<c0115354>] (unwind_backtrace) from [<c010e414>]
>>> (show_stack+0x20/0x24)
>>> [ 4.914915] [<c010e414>] (show_stack) from [<c04716f8>]
>>> (dump_stack+0x94/0xb0)
>>> [ 4.914927] [<c04716f8>] (dump_stack) from [<c014cd8c>]
>>> (__warn+0xf8/0x110)
>>> [ 4.914937] [<c014cd8c>] (__warn) from [<c014ce74>]
>>> (warn_slowpath_fmt+0x48/0x50)
>>> [ 4.914951] [<c014ce74>] (warn_slowpath_fmt) from [<c05ca298>]
>>> (drm_atomic_helper_wait_for_vblanks+0x258/0x25c)
>>> [ 4.914970] [<c05ca298>] (drm_atomic_helper_wait_for_vblanks)
>>> from [<c05f6ef4>] (imx_drm_atomic_commit_tail+0x58/0x68)
>>> [ 4.914982] [<c05f6ef4>] (imx_drm_atomic_commit_tail) from
>>> [<c05cac64>] (commit_tail+0x50/0x6c)
>>> [ 4.914992] [<c05cac64>] (commit_tail) from [<c05cb890>]
>>> (drm_atomic_helper_commit+0xa4/0xe4)
>>> [ 4.915003] [<c05cb890>] (drm_atomic_helper_commit) from
>>> [<c05f7008>] (imx_drm_atomic_commit+0x104/0x130)
>>> [ 4.915021] [<c05f7008>] (imx_drm_atomic_commit) from
>>> [<c05ec25c>] (drm_atomic_commit+0x5c/0x68)
>>> [ 4.915038] [<c05ec25c>] (drm_atomic_commit) from [<c05cf358>]
>>> (restore_fbdev_mode+0x158/0x298)
>>> [ 4.915051] [<c05cf358>] (restore_fbdev_mode) from [<c05cf6bc>]
>>> (drm_fb_helper_restore_fbdev_mode_unlocked+0x40/0x84)
>>> [ 4.915063] [<c05cf6bc>]
>>> (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c05cf578>]
>>> (drm_fb_helper_set_par+0x40/0x6c)
>>> [ 4.915076] [<c05cf578>] (drm_fb_helper_set_par) from
>>> [<c04fe008>] (fbcon_init+0x4b4/0x4f8)
>>> [ 4.915088] [<c04fe008>] (fbcon_init) from [<c05876e0>]
>>> (visual_init+0xd4/0x11c)
>>> [ 4.915102] [<c05876e0>] (visual_init) from [<c05898b4>]
>>> (do_bind_con_driver+0x14c/0x334)
>>> [ 4.915112] [<c05898b4>] (do_bind_con_driver) from [<c0589bec>]
>>> (do_take_over_console+0x150/0x1b4)
>>> [ 4.915121] [<c0589bec>] (do_take_over_console) from
>>> [<c04fe0d4>] (do_fbcon_takeover+0x88/0xe8)
>>> [ 4.915130] [<c04fe0d4>] (do_fbcon_takeover) from [<c04feda8>]
>>> (fbcon_event_notify+0x7c0/0x7f8)
>>> [ 4.915142] [<c04feda8>] (fbcon_event_notify) from [<c016f57c>]
>>> (notifier_call_chain+0x54/0x94)
>>> [ 4.915153] [<c016f57c>] (notifier_call_chain) from [<c016f88c>]
>>> (__blocking_notifier_call_chain+0x58/0x70)
>>> [ 4.915164] [<c016f88c>] (__blocking_notifier_call_chain) from
>>> [<c016f8cc>] (blocking_notifier_call_chain+0x28/0x30)
>>> [ 4.915175] [<c016f8cc>] (blocking_notifier_call_chain) from
>>> [<c0504d5c>] (fb_notifier_call_chain+0x2c/0x30)
>>> [ 4.915187] [<c0504d5c>] (fb_notifier_call_chain) from
>>> [<c0506b10>] (register_framebuffer+0x1f8/0x2b0)
>>> [ 4.915200] [<c0506b10>] (register_framebuffer) from
>>> [<c05cf960>] (drm_fb_helper_initial_config+0x260/0x408)
>>> [ 4.915212] [<c05cf960>] (drm_fb_helper_initial_config) from
>>> [<c05d00a0>] (drm_fbdev_cma_init_with_funcs+0x90/0x110)
>>> [ 4.915223] [<c05d00a0>] (drm_fbdev_cma_init_with_funcs) from
>>> [<c05d0148>] (drm_fbdev_cma_init+0x28/0x30)
>>> [ 4.915236] [<c05d0148>] (drm_fbdev_cma_init) from [<c05f7180>]
>>> (imx_drm_bind+0x104/0x194)
>>> [ 4.915254] [<c05f7180>] (imx_drm_bind) from [<c061b780>]
>>> (try_to_bring_up_master+0x234/0x294)
>>> [ 4.915266] [<c061b780>] (try_to_bring_up_master) from
>>> [<c061b8a0>] (component_add+0xc0/0x158)
>>> [ 4.915277] [<c061b8a0>] (component_add) from [<c05fa178>]
>>> (ipu_drm_probe+0x68/0x74)
>>> [ 4.915291] [<c05fa178>] (ipu_drm_probe) from [<c0622e90>]
>>> (platform_drv_probe+0x60/0xc0)
>>> [ 4.915304] [<c0622e90>] (platform_drv_probe) from [<c0620ce4>]
>>> (driver_probe_device+0x238/0x428)
>>> [ 4.915314] [<c0620ce4>] (driver_probe_device) from [<c0621230>]
>>> (__device_attach_driver+0xac/0x10c)
>>> [ 4.915324] [<c0621230>] (__device_attach_driver) from
>>> [<c061ec18>] (bus_for_each_drv+0x54/0x9c)
>>> [ 4.915335] [<c061ec18>] (bus_for_each_drv) from [<c06209a8>]
>>> (__device_attach+0xb0/0x134)
>>> [ 4.915344] [<c06209a8>] (__device_attach) from [<c06212ac>]
>>> (device_initial_probe+0x1c/0x20)
>>> [ 4.915354] [<c06212ac>] (device_initial_probe) from
>>> [<c061fdb8>] (bus_probe_device+0x94/0x9c)
>>> [ 4.915364] [<c061fdb8>] (bus_probe_device) from [<c0620290>]
>>> (deferred_probe_work_func+0x7c/0xc8)
>>> [ 4.915377] [<c0620290>] (deferred_probe_work_func) from
>>> [<c01679dc>] (process_one_work+0x14c/0x440)
>>> [ 4.915386] [<c01679dc>] (process_one_work) from [<c0167d6c>]
>>> (worker_thread+0x54/0x504)
>>> [ 4.915398] [<c0167d6c>] (worker_thread) from [<c016de48>]
>>> (kthread+0xf0/0x108)
>>> [ 4.915415] [<c016de48>] (kthread) from [<c0109cf8>]
>>> (ret_from_fork+0x14/0x3c)
>>> [ 4.915419] ---[ end trace 64ae59d2b69cc4d3 ]---
>>>
>>
>> and after a while:
>>
>>> [ 15.102758] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR*
>>> [CRTC:24:crtc-0] flip_done timed out
>>> [ 25.342746] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR*
>>> [CRTC:24:crtc-0] flip_done timed out
>>> [ 25.358582] Console: switching to colour frame buffer device
>>> 160x50
>>> [ 35.582744] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR*
>>> [CRTC:24:crtc-0] flip_done timed out
>>> [ 36.214243] imx-drm display-subsystem: fb0: frame buffer device
>>> [ 46.334758] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR*
>>> [CRTC:24:crtc-0] flip_done timed out
>>> [ 56.574757] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR*
>>> [CRTC:24:crtc-0] flip_done timed out
>>> [ 66.814751] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR*
>>> [CRTC:24:crtc-0] flip_done timed out
>>> [ 77.054740] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR*
>>> [CRTC:24:crtc-0] flip_done timed out
>>> [ 87.294748] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR*
>>> [CRTC:24:crtc-0] flip_done timed out
>>> [ 97.534744] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR*
>>> [CRTC:24:crtc-0] flip_done timed out
>>> [ 107.774751] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR*
>>> [CRTC:24:crtc-0] flip_done timed out
>>> [ 118.014750] [drm:drm_atomic_helper_commit_cleanup_done] *ERROR*
>>> [CRTC:24:crtc-0] flip_done timed out
>>
>> On both board the kernel cmd line is:
>>> ~# cat /proc/cmdline
>>> console=ttymxc2,115200 rootwait noswap ip=none noinitrd
>>> rootfstype=nilfs2 root=/dev/mmcblk1p3
>>> fec.macaddr=0x7a,0x3f,0x03,0xe3,0xa2,0xff system_rev=0xe3600000
>>> system_serialnr=0x00000000 lcd_type=am1280800n3tz fastboot
>>> imxdrm.legacyfb_depth=32
>>
>> Any help?
>
> Your kernel is too old. Full support for the QuadPlus is a really
> recent addition. Either update your kernel to 4.12-rc, or add
> "clk_ignore_unused" to get at least basic functionality working.
>
Now I am compiling the 4.12-rc7. Hope this helps.
I will keep you informed about that...
Regards,
--
Eurek s.r.l. |
Electronic Engineering | http://www.eurek.it
via Celletta 8/B, 40026 Imola, Italy | Phone: +39-(0)542-609120
p.iva 00690621206 - c.f. 04020030377 | Fax: +39-(0)542-609212
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2017-06-26 13:28 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <63687e34-f354-81d3-aed7-1a59866925c5@eurekelettronica.it>
2017-02-21 13:04 ` gianluca
2017-02-21 14:56 ` gianluca
2017-02-21 15:03 ` Lucas Stach
2017-02-21 17:59 ` gianluca
2017-06-19 15:49 ` gianluca
2017-06-21 6:32 ` Sascha Hauer
2017-06-21 11:35 ` gianluca
2017-06-21 11:50 ` Lucas Stach
2017-06-21 15:18 ` gianluca
2017-06-21 15:30 ` Lucas Stach
2017-06-23 9:45 ` gianluca
2017-06-26 8:40 ` gianluca
2017-06-26 8:46 ` Lucas Stach
2017-06-26 13:28 ` gianluca [this message]
2017-06-28 16:55 ` gianluca
2017-06-29 8:37 ` Lucas Stach
2017-06-29 10:07 ` gianluca
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5e3f93ae-e91a-8e89-9979-e90584c5ad3d@eurekelettronica.it \
--to=gianlucarenzi@eurekelettronica.it \
--cc=barebox@lists.infradead.org \
--cc=l.stach@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox