mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Sascha Hauer <s.hauer@pengutronix.de>,
	Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH v2 2/2] partitions: dos: change first partition number from 1 to 0
Date: Fri, 1 Mar 2024 09:15:39 +0100	[thread overview]
Message-ID: <63cf1867-8eb3-4902-8f07-763d3fed085f@pengutronix.de> (raw)
In-Reply-To: <20240229071825.1624411-2-s.hauer@pengutronix.de>

On 29.02.24 08:18, Sascha Hauer wrote:
> Traditionally barebox starts partition numbers at 0. This was changed
> in 8f48e6366c to start at 1. This was done to make the parted numbering
> consistent to the Linux tool. This breaks boot scripts though which
> assume 0 to be the first partition, so change it back.
> 
> Fixes: 8f48e6366c ("partitions: dos: implement partition manipulation support")
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

> ---
> 
> Notes:
>     Changes since v1:
>     
>     - fix partuuid number passed to Linux
> 
>  common/partitions/dos.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/common/partitions/dos.c b/common/partitions/dos.c
> index 47b5764124..1b0051f978 100644
> --- a/common/partitions/dos.c
> +++ b/common/partitions/dos.c
> @@ -127,7 +127,7 @@ static void dos_extended_partition(struct block_device *blk, struct dos_partitio
>  	uint8_t *buf = malloc(SECTOR_SIZE);
>  	uint32_t ebr_sector = partition->first_sec;
>  	struct partition_entry *table = (struct partition_entry *)&buf[0x1be];
> -	unsigned partno = 5;
> +	unsigned partno = 4;
>  	struct dos_partition *dpart;
>  	struct partition *pentry;
>  
> @@ -170,7 +170,7 @@ static void dos_extended_partition(struct block_device *blk, struct dos_partitio
>  		pentry->size = get_unaligned_le32(&table[0].partition_size);
>  		pentry->dos_partition_type = table[0].type;
>  		pentry->num = partno;
> -		sprintf(pentry->partuuid, "%08x-%02u", signature, partno);
> +		sprintf(pentry->partuuid, "%08x-%02u", signature, partno + 1);
>  
>  		list_add_tail(&pentry->list, &dpd->pd.partitions);
>  
> @@ -237,7 +237,7 @@ static struct partition_desc *dos_partition(void *buf, struct block_device *blk)
>  		pentry->first_sec = first_sec;
>  		pentry->size = get_unaligned_le32(&table[i].partition_size);
>  		pentry->dos_partition_type = table[i].type;
> -		pentry->num = i + 1;
> +		pentry->num = i;
>  
>  		sprintf(pentry->partuuid, "%08x-%02d", signature, i + 1);
>  		dpd->signature = signature;

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |




  reply	other threads:[~2024-03-01  8:16 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-29  7:18 [PATCH v2 1/2] partitions: efi: " Sascha Hauer
2024-02-29  7:18 ` [PATCH v2 2/2] partitions: dos: " Sascha Hauer
2024-03-01  8:15   ` Ahmad Fatoum [this message]
2024-03-01  9:21 ` [PATCH v2 1/2] partitions: efi: " Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=63cf1867-8eb3-4902-8f07-763d3fed085f@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox