Re: boards/enclustra-sa2: add new board (HELP NEEDED)

[Ahmad Fatoum <a.fatoum@pengutronix.de>]

Hi David,

On 7/11/25 10:04, David Picard wrote:
> Hi,
> 
> CONFIG_ARCH_SOCFPGA_ARRIA10 was enabled, indeed. I disabled a bunch of
> boards.
> 
> # CONFIG_MACH_SOCFPGA_ALTERA_SOCDK is not set
> # CONFIG_MACH_SOCFPGA_EBV_SOCRATES is not set
> # CONFIG_MACH_SOCFPGA_ENCLUSTRA_AA1 is not set
> # CONFIG_MACH_SOCFPGA_REFLEX_ACHILLES is not set
> # CONFIG_MACH_SOCFPGA_TERASIC_DE0_NANO_SOC is not set
> # CONFIG_MACH_SOCFPGA_TERASIC_DE10_NANO is not set
> # CONFIG_MACH_SOCFPGA_TERASIC_SOCKIT is not set
> # CONFIG_ARCH_SOCFPGA_ARRIA10 is not set
> 
> However, I won't be able to test until Tuesday morning. I'll report then.

Normally, barebox should be able to deal fine with different boards or
even SoCs being enabled, so this is a bug that should preferably be
fixed anyways once we have determined it was indeed the issue.

By the way, the barebox IRC is bridged to Matrix[1], which makes it easy
to see messages sent while offline.

[1]: https://app.element.io/#/room/#barebox:matrix.org

Cheers,
Ahmad

> 
> David
> 
> 
> Le 10/07/2025 à 20:30, Ahmad Fatoum a écrit :
>> As for why it hangs, I suspect you have CONFIG_ARCH_SOCFPGA_ARRIA10
>> enabled, despite that SA2 using a Cyclone V.
>>
>> Can you check if CONFIG_ARCH_SOCFPGA_ARRIA10 is enabled and try again
>> after disabling it if it is?
> 
> 
> 

-- 
Pengutronix e.K.                  |                             |
Steuerwalder Str. 21              | http://www.pengutronix.de/  |
31137 Hildesheim, Germany         | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |