From: Vanalme Filip <F.Vanalme@TELEVIC.com>
To: "barebox@lists.infradead.org" <barebox@lists.infradead.org>
Subject: bootargs
Date: Thu, 3 Mar 2011 13:22:41 +0100 [thread overview]
Message-ID: <6EE7D1502C48E44E92DCADF9DD3E0DB9017FF3B00FC6@SRV-VS06.TELEVIC.COM> (raw)
In the current phase, I can boot the kernel, but it panics when trying to mount the root filesystem.
I downloaded a root filesystem from the server into the dedicated NAND partition : tftp rootfs.jffs2 /dev/nand0.root.bb
This seems to be OK.
However, I have doubts about the bootargs I'm passing to the kernel :
commandline: console=ttymxc0,115200 ip=dhcp root=/dev/mtdblock3 rootfstype=jffs2 earlyprintk mtdparts=mxc_nand:256k(barebox)ro,128k(bareboxenv),2M(kernel),-(root)
Does this look OK ?
These are the last lines of the console output when booting the kernel :
IP-Config: Got DHCP answer from 0.0.0.0, my address is 10.0.49.70
IP-Config: Complete:
device=eth0, addr=10.0.49.70, mask=255.255.0.0, gw=10.0.127.254,
host=10.0.49.70, domain=televic.com, nis-domain=(none),
bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath=
VFS: Unable to mount root fs via NFS, trying floppy.
List of all partitions:
No filesystem could mount root, tried: jffs2
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
The line " VFS: Unable to mount root fs via NFS, trying floppy." looks incorrect to me. I do not mention NFS in my bootargs, so...
At "List of all partitions:", shouldn't I have a list of the four partitions I mention in the bootargs ?
This may also be useful :
barebox:/ devinfo
devices:
|----imx_serial0
|----cs0
|----ramfs0
|----devfs0
|----mem0 (defaultenv)
|----mem1 (mem)
|----imx_spi1
|----mc137830 (pmic)
|----mem2 (ram0)
|----imx_nand0
|----nand0 (nand0, nand_oob0, self_raw, env_raw, nand0.barebox, nand0.bareboxenv, nand0.kernel, nand0.root) <=======
|----fec_imx0
|----miidev0 (phy0)
|----eth0
drivers:
imx_serial
ramfs
devfs
fec_imx
miidev
imx_nand
cfi_flash
imx_spi
imxfb
mc13783
mem
(This might as well be a kernel related issue and therefor maybe not fitting in barebox's mailing list - if so, sorry...)
Filip
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2011-03-03 12:22 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-03 12:22 Vanalme Filip [this message]
2011-03-03 12:33 ` bootargs Sascha Hauer
2011-03-03 14:00 ` bootargs Vanalme Filip
2011-03-03 14:13 ` bootargs Sascha Hauer
2011-03-03 14:23 ` bootargs Vanalme Filip
2011-03-03 14:34 ` bootargs Jon Ringle
2011-03-03 14:42 ` bootargs Vanalme Filip
2011-03-03 14:43 ` bootargs Sascha Hauer
2011-03-04 8:18 bootargs Vanalme Filip
2011-03-04 8:30 ` bootargs Sascha Hauer
2011-03-04 12:54 ` bootargs Vanalme Filip
2011-03-04 13:13 ` bootargs Baruch Siach
2011-03-04 13:24 ` bootargs Vanalme Filip
2011-03-04 13:49 ` bootargs Vanalme Filip
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6EE7D1502C48E44E92DCADF9DD3E0DB9017FF3B00FC6@SRV-VS06.TELEVIC.COM \
--to=f.vanalme@televic.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox