From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from ip2.televic.com ([81.82.194.222]) by canuck.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1Pv94d-0007KI-95 for barebox@lists.infradead.org; Thu, 03 Mar 2011 14:00:12 +0000 From: Vanalme Filip Date: Thu, 3 Mar 2011 15:00:07 +0100 Message-ID: <6EE7D1502C48E44E92DCADF9DD3E0DB9017FF3B00FE1@SRV-VS06.TELEVIC.COM> References: <6EE7D1502C48E44E92DCADF9DD3E0DB9017FF3B00FC6@SRV-VS06.TELEVIC.COM> <20110303123324.GK29521@pengutronix.de> In-Reply-To: <20110303123324.GK29521@pengutronix.de> Content-Language: en-US MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: RE: bootargs To: Sascha Hauer Cc: "barebox@lists.infradead.org" > -----Original Message----- > From: Sascha Hauer [mailto:s.hauer@pengutronix.de] > Sent: donderdag 3 maart 2011 13:33 > To: Vanalme Filip > Cc: barebox@lists.infradead.org > Subject: Re: bootargs > > On Thu, Mar 03, 2011 at 01:22:41PM +0100, Vanalme Filip wrote: > > In the current phase, I can boot the kernel, but it panics when trying to mount the > root filesystem. > > I downloaded a root filesystem from the server into the dedicated NAND partition > : tftp rootfs.jffs2 /dev/nand0.root.bb > > This seems to be OK. > > > > However, I have doubts about the bootargs I'm passing to the kernel : > > > > commandline: console=ttymxc0,115200 ip=dhcp root=/dev/mtdblock3 > rootfstype=jffs2 earlyprintk > mtdparts=mxc_nand:256k(barebox)ro,128k(bareboxenv),2M(kernel),-(root) > > > > Does this look OK ? > > Yes, looks good. > > > > > These are the last lines of the console output when booting the kernel : > > > > IP-Config: Got DHCP answer from 0.0.0.0, my address is 10.0.49.70 > > IP-Config: Complete: > > device=eth0, addr=10.0.49.70, mask=255.255.0.0, gw=10.0.127.254, > > host=10.0.49.70, domain=televic.com, nis-domain=(none), > > bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= > > VFS: Unable to mount root fs via NFS, trying floppy. > > List of all partitions: > > No filesystem could mount root, tried: jffs2 > > Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0) > > Do you have enabled the mxc_nand driver in the kernel and also mtd > command line partitioning (CONFIG_MTD_CMDLINE_PARTS)? [Filip] I have CONFIG_MTD_CMDLINE_PARTS=y and CONFIG_MTD_NAND_MXC=y. > > Sascha > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox