From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Sascha Hauer <s.hauer@pengutronix.de>,
BAREBOX <barebox@lists.infradead.org>
Subject: Re: [PATCH v2 05/33] ARM: dts: am62l: Fix assigned-clock-parents
Date: Mon, 16 Jun 2025 13:41:17 +0200 [thread overview]
Message-ID: <7ee7b7ea-af1d-4026-865c-e7bb8b49feef@pengutronix.de> (raw)
In-Reply-To: <20250605-arm-k3-am62l-v2-5-53257d4b2dd2@pengutronix.de>
On 6/5/25 14:42, Sascha Hauer wrote:
> The AM62l device trees we imported to barebox have problems with the
> clock parents which is described in [1] and [2].
>
> There is no way the Kernel or barebox SCMI clk drivers can work with the
> current way the clk parents are specified in the downstream TF-A. This
> problem is acknowledged by TI and will hopefully be fixed.
>
> This patch fixes the clk parents the way that I hope TI will do it as
> well. Currently this only works with a patched downstream TF-A.
Sounds like worth mentioning that in the barebox K3 documentation?
>
> [1] https://lore.kernel.org/all/aCcSG5ah12N0yOwi@pengutronix.de/
> [2] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/34834/1/plat/ti/k3/common/drivers/scmi/scmi_clock.c#165
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> arch/arm/dts/k3-am62l-main.dtsi | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/dts/k3-am62l-main.dtsi b/arch/arm/dts/k3-am62l-main.dtsi
> index f6fbaaede8c36ac0aab92bef7763202bb0ab30dc..d161df3215c35a2d3de67e8ca021b9a9a89edb80 100644
> --- a/arch/arm/dts/k3-am62l-main.dtsi
> +++ b/arch/arm/dts/k3-am62l-main.dtsi
> @@ -217,7 +217,7 @@ rti0: watchdog@e000000 {
> clocks = <&scmi_clk 273>;
> power-domains = <&scmi_pds 60>;
> assigned-clocks = <&scmi_clk 273>;
> - assigned-clock-parents = <&scmi_clk 1>;
> + assigned-clock-parents = <&scmi_clk 275>;
> };
>
> rti1: watchdog@e010000 {
> @@ -226,7 +226,7 @@ rti1: watchdog@e010000 {
> clocks = <&scmi_clk 279>;
> power-domains = <&scmi_pds 61>;
> assigned-clocks = <&scmi_clk 279>;
> - assigned-clock-parents = <&scmi_clk 1>;
> + assigned-clock-parents = <&scmi_clk 281>;
> };
>
> fss: bus@fc00000 {
> @@ -317,7 +317,7 @@ sdhci0: mmc@fa10000 {
> clocks = <&scmi_clk 122>, <&scmi_clk 123>;
> clock-names = "clk_ahb", "clk_xin";
> assigned-clocks = <&scmi_clk 123>;
> - assigned-clock-parents = <&scmi_clk 0>;
> + assigned-clock-parents = <&scmi_clk 124>;
> bus-width = <8>;
> ti,clkbuf-sel = <0x7>;
> ti,otap-del-sel-legacy = <0x0>;
> @@ -334,7 +334,7 @@ sdhci1: mmc@fa00000 {
> clocks = <&scmi_clk 106>, <&scmi_clk 107>;
> clock-names = "clk_ahb", "clk_xin";
> assigned-clocks = <&scmi_clk 107>;
> - assigned-clock-parents = <&scmi_clk 0>;
> + assigned-clock-parents = <&scmi_clk 108>;
> bus-width = <4>;
> ti,clkbuf-sel = <0x7>;
> ti,otap-del-sel-legacy = <0x0>;
> @@ -351,7 +351,7 @@ sdhci2: mmc@fa20000 {
> clocks = <&scmi_clk 114>, <&scmi_clk 115>;
> clock-names = "clk_ahb", "clk_xin";
> assigned-clocks = <&scmi_clk 115>;
> - assigned-clock-parents = <&scmi_clk 0>;
> + assigned-clock-parents = <&scmi_clk 116>;
> bus-width = <4>;
> ti,clkbuf-sel = <0x7>;
> ti,otap-del-sel-legacy = <0x0>;
> @@ -600,7 +600,7 @@ tscadc0: tscadc@28001000 {
> power-domains = <&scmi_pds 0>;
> clocks = <&scmi_clk 0>;
> assigned-clocks = <&scmi_clk 0>;
> - assigned-clock-parents = <&scmi_clk 2>;
> + assigned-clock-parents = <&scmi_clk 3>;
> assigned-clock-rates = <60000000>;
> clock-names = "fck";
> status = "disabled";
> @@ -618,7 +618,7 @@ dphy_tx0: phy@301c0000 {
> clock-names = "psm", "pll_ref";
> power-domains = <&scmi_pds 86>;
> assigned-clocks = <&scmi_clk 341>;
> - assigned-clock-parents = <&scmi_clk 0>;
> + assigned-clock-parents = <&scmi_clk 342>;
> assigned-clock-rates = <25000000>;
> #phy-cells = <0>;
> status = "disabled";
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2025-06-16 12:51 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-05 12:42 [PATCH v2 00/33] ARM: K3: add support for AM62L Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 01/33] scripts/k3img: make more flexible Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 02/33] images: K3: rename %.k3img target to %.k3_am62x_img Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 03/33] ARM: K3: prepare support for other SoCs Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 04/33] ARM: dts: add k3-am62l dts(i) files Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 05/33] ARM: dts: am62l: Fix assigned-clock-parents Sascha Hauer
2025-06-16 11:41 ` Ahmad Fatoum [this message]
2025-06-17 9:10 ` Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 06/33] ARM: K3: add am62lx base support Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 07/33] ARM: Makefile: descend into mach-* for cleaning Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 08/33] ARM: k3: rename yaml files from am625 to am62x Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 09/33] firmware: add ti-linux-firmware submodule Sascha Hauer
2025-06-16 11:54 ` Ahmad Fatoum
2025-06-05 12:42 ` [PATCH v2 10/33] scripts/ti-board-config.py: fix length Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 11/33] ARM: k3: add yaml files for AM62l Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 12/33] k3: ringacc: pass ringrt address in struct k3_ringacc_init_data Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 13/33] drivers: soc: ti: k3-ringacc: handle absence of tisci Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 14/33] drivers: soc: ti: k3-ringacc: fix k3_ringacc_ring_reset_sci Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 15/33] dma: ti: k3-psil: Add PSIL data for AM62L Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 16/33] dma: ti: k3-udma: Refactor common bits for AM62L support Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 17/33] dma: ti: k3-udma-common: Update common code for AM62L DMAs Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 18/33] dma: ti: k3-udma-am62l: Add AM62L support DMA drivers Sascha Hauer
2025-06-16 11:57 ` Ahmad Fatoum
2025-06-17 8:20 ` Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 19/33] ARM: dts: am62l: Add ethernet ports Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 20/33] ARM: dts: am62l evm: " Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 21/33] ARM: k3: am62l: add barebox specific am62l.dtsi Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 22/33] net: davinci_mdio: Use fallback clock rate Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 23/33] firmware: arm_scmi: Add support for clock parents Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 24/33] clk: add struct clk_parent_data Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 25/33] clk: arm_scmi: implement clock parent setting Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 26/33] ARM: dts: am62l3-evm: add MMC aliases Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 27/33] dma: ti: k3-udma: limit asel to am625 Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 28/33] gpio: increase ARCH_NR_GPIOS to 512 Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 29/33] ARM: dts: k3-am62l: reserve memory for TF-A and OP-TEE Sascha Hauer
2025-06-16 12:01 ` Ahmad Fatoum
2025-06-05 12:42 ` [PATCH v2 30/33] ARM: k3: add AM62l3 EVM board support Sascha Hauer
2025-06-16 12:03 ` Ahmad Fatoum
2025-06-17 9:18 ` Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 31/33] ARM: K3: am62l: add serial aliases Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 32/33] Documentation: boards: k3: split generic and am62x specific documentation Sascha Hauer
2025-06-05 12:42 ` [PATCH v2 33/33] Documentation: boards: k3: add AM62lx documentation Sascha Hauer
2025-06-17 6:54 ` [PATCH v2 00/33] ARM: K3: add support for AM62L Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7ee7b7ea-af1d-4026-865c-e7bb8b49feef@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox