From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Marco Felsch <m.felsch@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 0/6] of: partition: add Linux CONFIG_OF_PARTITION-compatible adaptive fixup mode
Date: Mon, 17 Feb 2025 20:57:23 +0100 [thread overview]
Message-ID: <87a7379e-8b95-4639-a100-8efe2e070fba@pengutronix.de> (raw)
In-Reply-To: <20250217192523.crgvcg2phxhce46d@pengutronix.de>
Hi,
On 17.02.25 20:25, Marco Felsch wrote:
> Hi Ahmad,
>
> thanks for working on this!
>
> On 25-02-17, Ahmad Fatoum wrote:
>> barebox has for many years supported a superset of the upstream OF
>> partitions binding by parsing partitions out of SD/eMMC and EEPROM
>> in addition to MTD.
>>
>> Unfortunately, we didn't upstream our binding and a different binding
>> went upstream into Linux v6.13-rc1 along with Linux commit
>> 2e3a191e89f9 ("block: add support for partition table defined in OF").
>>
>> Since then, if CONFIG_OF_PARTITION, which is disabled by default, is
>> enabled, Linux will ignore any GPT/MBR if an SD/eMMC node has a
>> fixed-partitions compatible subnode.
>>
>> This is different from the barebox behavior, which allows both OF
>> partitions and GPT/MBR to co-exist as long as they don't conflict.
>>
>> As many barebox boards:
>>
>> - Place the environment in non-partitioned space prior to the first
>> partition
>>
>> - Fixup all fixed-partitions into the kernel device tree by default
>
> Could we add a warning/notice that the board should be converted to make
> use of the barebox GPT parttype-uuid? It's 2025 and IMHO there is no
> reason for not using the GPT with the barebox state part-type UUID in
> place. This is of course not related to this patchset.
There's no partition type UUID solution for barebox on EFI systems yet
and for many systems in the field, switching to partition type UUID
would mean a migration step, where a rollback to a system with an old
barebox-state version is not possible...
Cheers,
Ahmad
>
> Regards,
> Marco
>
>> this can result in breakage if a newer kernel is booted with
>> CONFIG_OF_PARTITION enabled.
>>
>> To resolve this, this series introduces the barebox,fixed-partitions
>> compatible and uses that in Linux device tree fixups for SD/eMMC
>> by default.
>>
>> Ahmad Fatoum (6):
>> of: factor out of_node_is_fixed_partitions check
>> of: of_path: support barebox,fixed-partitions
>> ARM: IMX8MP: var-dart-dt8mcustomboard.dts: use new-style partition
>> binding
>> ARM: dts: prefix all non-MTD fixed-partitions with barebox,
>> of: partition: refactor of_partition_binding checks into switch
>> of: partition: add Linux CONFIG_OF_PARTITION-compatible adaptive fixup
>> mode
>>
>> .../devicetree/bindings/mtd/partition.rst | 27 +++++++-
>> Documentation/user/state.rst | 4 +-
>> arch/arm/dts/am335x-phytec-state.dtsi | 2 +-
>> .../dts/fsl-ls1046a-tqmls1046a-mbls10xxa.dts | 2 +-
>> arch/arm/dts/imx50-kindle-common.dtsi | 2 +-
>> arch/arm/dts/imx51-zii-rdu1.dts | 2 +-
>> arch/arm/dts/imx6dl-colibri-iris.dts | 2 +-
>> arch/arm/dts/imx6qdl-phytec-mira.dtsi | 2 +-
>> arch/arm/dts/imx6qdl-phytec-phycard-som.dtsi | 2 +-
>> arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi | 2 +-
>> arch/arm/dts/imx6qdl-phytec-state.dtsi | 2 +-
>> arch/arm/dts/imx6qdl-zii-rdu2.dtsi | 2 +-
>> arch/arm/dts/imx6ul-liteboard.dts | 4 +-
>> arch/arm/dts/imx6ul-phytec-state.dtsi | 2 +-
>> arch/arm/dts/imx6ul-tqma6ul-common.dtsi | 4 +-
>> arch/arm/dts/imx6ul-webasto-ccbv2.dts | 2 +-
>> arch/arm/dts/imx6ul-webasto-marvel.dts | 2 +-
>> arch/arm/dts/imx7d-ac-sxb.dtsi | 4 +-
>> arch/arm/dts/imx7d-flex-concentrator-mfg.dts | 2 +-
>> arch/arm/dts/imx7d-gome-e143_01.dts | 2 +-
>> arch/arm/dts/imx7d-phyboard-zeta.dts | 2 +-
>> arch/arm/dts/imx7s-warp.dts | 2 +-
>> arch/arm/dts/imx8mm-innocomm-wb15-evk.dts | 4 +-
>> arch/arm/dts/imx8mm-phyboard-polis-rdk.dts | 4 +-
>> arch/arm/dts/imx8mp-debix-model-a.dts | 4 +-
>> arch/arm/dts/imx8mp-debix-som-a-bmb-08.dts | 4 +-
>> arch/arm/dts/imx8mp-karo-qsxp-ml81.dtsi | 2 +-
>> .../dts/imx8mp-var-dart-dt8mcustomboard.dts | 25 ++++----
>> arch/arm/dts/rk3566-cm3-io.dts | 4 +-
>> arch/arm/dts/rk3566-pinetab2.dtsi | 4 +-
>> arch/arm/dts/rk3568-bpi-r2-pro.dts | 4 +-
>> arch/arm/dts/rk3568-evb1-v10.dts | 4 +-
>> arch/arm/dts/rk3568-mecsbc.dts | 4 +-
>> arch/arm/dts/rk3568-rock-3a.dts | 4 +-
>> arch/arm/dts/rk3568-wolfvision-pf5.dts | 2 +-
>> arch/arm/dts/rk3588-orangepi-5-plus.dts | 4 +-
>> arch/arm/dts/rk3588-rock-5b.dts | 4 +-
>> arch/arm/dts/socfpga_arria10_achilles.dts | 2 +-
>> arch/arm/dts/socfpga_arria10_mercury_aa1.dts | 2 +-
>> arch/arm/dts/state-example.dtsi | 4 +-
>> drivers/of/base.c | 6 +-
>> drivers/of/of_path.c | 9 ++-
>> drivers/of/partition.c | 62 ++++++++++++-------
>> include/of.h | 6 ++
>> 44 files changed, 149 insertions(+), 96 deletions(-)
>>
>> --
>> 2.39.5
>>
>>
>>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2025-02-17 19:58 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-17 18:08 Ahmad Fatoum
2025-02-17 18:08 ` [PATCH 1/6] of: factor out of_node_is_fixed_partitions check Ahmad Fatoum
2025-02-17 18:08 ` [PATCH 2/6] of: of_path: support barebox,fixed-partitions Ahmad Fatoum
2025-02-17 18:08 ` [PATCH 3/6] ARM: IMX8MP: var-dart-dt8mcustomboard.dts: use new-style partition binding Ahmad Fatoum
2025-02-17 18:08 ` [PATCH 4/6] ARM: dts: prefix all non-MTD fixed-partitions with barebox, Ahmad Fatoum
2025-02-17 18:08 ` [PATCH 5/6] of: partition: refactor of_partition_binding checks into switch Ahmad Fatoum
2025-02-17 18:08 ` [PATCH 6/6] of: partition: add Linux CONFIG_OF_PARTITION-compatible adaptive fixup mode Ahmad Fatoum
2025-02-17 19:25 ` [PATCH 0/6] " Marco Felsch
2025-02-17 19:57 ` Ahmad Fatoum [this message]
2025-02-20 8:26 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87a7379e-8b95-4639-a100-8efe2e070fba@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=m.felsch@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox