mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] ARM: atmel: sama5d3xek: let gmac auto detect phy id
Date: Fri, 23 Jan 2015 16:00:16 +0800	[thread overview]
Message-ID: <8A2C9F02-0CF3-4255-A97A-B0D0A7351DCE@jcrosoft.com> (raw)
In-Reply-To: <20150123073650.GW12209@pengutronix.de>


> On Jan 23, 2015, at 3:36 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> 
> On Thu, Jan 22, 2015 at 12:35:17PM +0800, Jean-Christophe PLAGNIOL-VILLARD wrote:
>> 
>>> On Jan 21, 2015, at 11:07 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
>>> 
>>> On Mon, Jan 19, 2015 at 12:39:39PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
>>>> On 17:54 Mon 19 Jan     , Bo Shen wrote:
>>>>> On the SAMA5D33 and SAMA5D35 the GMAC PHY ID is 1 while not 7.
>>>>> So, let the GMAC auto detect phy id, or else hard code to 7,
>>>>> it can not work on these two boards.
>>>>> 
>>>>> Signed-off-by: Bo Shen <voice.shen@atmel.com>
>>>>> ---
>>>>> 
>>>>> arch/arm/boards/sama5d3xek/init.c | 2 +-
>>>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>>> 
>>>>> diff --git a/arch/arm/boards/sama5d3xek/init.c b/arch/arm/boards/sama5d3xek/init.c
>>>>> index 49d2b37..0b83147 100644
>>>>> --- a/arch/arm/boards/sama5d3xek/init.c
>>>>> +++ b/arch/arm/boards/sama5d3xek/init.c
>>>>> @@ -123,7 +123,7 @@ static void ek_add_device_nand(void) {}
>>>>> #if defined(CONFIG_DRIVER_NET_MACB)
>>>>> static struct macb_platform_data gmac_pdata = {
>>>>> 	.phy_interface = PHY_INTERFACE_MODE_RGMII,
>>>>> -	.phy_addr = 7,
>>>>> +	.phy_addr = -1,
>>>> IIRC the auto detect do not work on all board
>>>> NACK
>>> 
>>> Please give us some more information why this doesn't work or on which
>>> boards this doesn't work. Rejecting patches with 'IIRC' just blocks the
>>> patch without giving a clue what else should be done.
>> 
>> This is the same board but différent SoC Module
>> 
>> Bo MUST test it on all of them before do such modification
>> 
>> IIRC the phy is detect on addr 1 instead of 7 on some CPU Module
> 
> When the original 7 does not work on all boards, then autodetection
> seems to be a valid solution.

Except the auto detection does not work on all board

so as we can detect the board and SoC we can known the phy_addr
> 
> Sascha
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2015-01-23  8:00 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-19  9:54 Bo Shen
2015-01-19 11:39 ` Jean-Christophe PLAGNIOL-VILLARD
2015-01-20  0:56   ` Bo Shen
2015-01-21 15:07   ` Sascha Hauer
2015-01-22  4:35     ` Jean-Christophe PLAGNIOL-VILLARD
     [not found]       ` <54C086AA.9030605@atmel.com>
2015-01-22  6:20         ` Bo Shen
2015-01-22  6:20       ` Bo Shen
2015-01-23  7:36       ` Sascha Hauer
2015-01-23  8:00         ` Jean-Christophe PLAGNIOL-VILLARD [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8A2C9F02-0CF3-4255-A97A-B0D0A7351DCE@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox