From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Doug Brainard <dbrainard@brainardinsight.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/2] SAMA5D4EK - Now mostly supports booting Android from NAND.
Date: Wed, 11 Feb 2015 13:04:54 +0800 [thread overview]
Message-ID: <8AB825FC-0258-468F-AB17-99EA2253BD7D@jcrosoft.com> (raw)
In-Reply-To: <1423578481-25230-1-git-send-email-dbrainard@brainardinsight.com>
Nack
I use those board everyday on nfs boot
the boot choice is user specific
Best Regards,
J.
> On Feb 10, 2015, at 10:28 PM, Doug Brainard <dbrainard@brainardinsight.com> wrote:
>
> ---
> arch/arm/boards/sama5d4ek/env/config | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/boards/sama5d4ek/env/config b/arch/arm/boards/sama5d4ek/env/config
> index 1007345..ee86c07 100644
> --- a/arch/arm/boards/sama5d4ek/env/config
> +++ b/arch/arm/boards/sama5d4ek/env/config
> @@ -11,16 +11,16 @@ ip=dhcp
> #eth0.serverip=a.b.c.d
>
> # can be either 'nfs', 'tftp', 'nor' or 'nand'
> -kernel_loc=nfs
> +kernel_loc=nand
> # can be either 'net', 'nor', 'nand' or 'initrd'
> -rootfs_loc=net
> +rootfs_loc=nand
> # can be either 'nfs', 'tftp', 'nand' or empty
> -oftree_loc=nfs
> +oftree_loc=nand
>
> # can be either 'jffs2' or 'ubifs'
> rootfs_type=ubifs
> rootfsimage=root.$rootfs_type
> -ubiroot=rootfs
> +ubiroot=system
>
> # The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
> kernelimage=zImage
> @@ -29,14 +29,14 @@ kernelimage=zImage
> #kernelimage=Image.lzo
>
> nand_device=atmel_nand
> -nand_parts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),-(rootfs)"
> -rootfs_mtdblock_nand=7
> +nand_parts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),8M(recovery),176M(system),304M(userdata),-(cache)"
> +rootfs_mtdblock_nand=10
>
> m25p80_parts="64k(bootstrap),384k(barebox),256k(bareboxenv),256k(bareboxenv2),128k(oftree),-(updater)"
>
> autoboot_timeout=3
>
> -bootargs="console=ttyS0,115200"
> +bootargs="console=ttyS0,115200 ubi.mtd=8 ubi.mtd=9 init=/init androidboot.hardware=sama5-pda androidboot.lcd=wvga"
>
> # set a fancy prompt (if support is compiled in)
> PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m\n# "
> --
> 2.3.0
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2015-02-11 5:05 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-10 14:28 Doug Brainard
2015-02-10 14:28 ` [PATCH 2/2] Switched SAMA5D4EK development board to the newer environment method Doug Brainard
2015-02-11 2:34 ` Bo Shen
2015-02-11 4:00 ` Doug Brainard
2015-02-11 5:06 ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-11 7:26 ` Bo Shen
2015-02-11 8:35 ` Sascha Hauer
2015-02-11 8:54 ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-11 9:12 ` Eric Bénard
2015-02-11 9:19 ` Sascha Hauer
2015-02-11 12:03 ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-11 14:33 ` Sascha Hauer
2015-02-11 8:43 ` Sascha Hauer
2015-02-11 16:53 ` Doug Brainard
2015-02-11 16:38 ` Doug Brainard
2015-02-11 17:39 ` Doug Brainard
2015-02-12 9:13 ` Sascha Hauer
2015-02-13 2:57 ` Doug Brainard
2015-02-13 5:32 ` Doug Brainard
2015-02-11 1:30 ` [PATCH 1/2] SAMA5D4EK - Now mostly supports booting Android from NAND Bo Shen
2015-02-11 4:02 ` Doug Brainard
2015-02-11 7:23 ` Bo Shen
2015-02-11 5:04 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2015-02-11 7:42 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8AB825FC-0258-468F-AB17-99EA2253BD7D@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
--cc=dbrainard@brainardinsight.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox