From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kPiaC-0002Jv-8W for barebox@lists.infradead.org; Tue, 06 Oct 2020 08:44:29 +0000 Message-ID: <8a0d7de81f77b7a2e4a689d7a1464a7617ad4ff2.camel@pengutronix.de> From: Lucas Stach Date: Tue, 06 Oct 2020 10:44:24 +0200 In-Reply-To: <20201005151759.GE11648@pengutronix.de> References: <005d01d69b15$180b4aa0$4821dfe0$@eletechsrl.it> <20201005151759.GE11648@pengutronix.de> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: imx6ul: fec: stuck on ifup after ifdown To: Sascha Hauer , Manni Stefano Cc: barebox@lists.infradead.org, Aurelio Colosimo On Mo, 2020-10-05 at 17:17 +0200, Sascha Hauer wrote: > Hi Stefano, > > On Mon, Oct 05, 2020 at 02:43:15PM +0200, Manni Stefano wrote: > > Hi, > > > > on a custom board based on a i.MX6UL using barebox v2020.08.1 'ifup eth0' > > invoked after 'ifdown eth0' stucks forever. > > > > Have you ever experienced something similar? > > I can confirm the same happens here on an i.MX6q board on current > master. I don't know what's happening here. The last thing I see is that > fec_tx_task_enable() is entered. Strange enough the same works on i.MX53 > whereas on i.MX8M I get "ERROR: eth0: transmission timeout" on the > second ifup. > > This is really strange. It seems fec_tx_task_enable() brings down the > whole SoC, but on the other hand the FEC works properly in a chainloaded > barebox, which should - from the view of the ethernet controller - be > the same as a repeated ifup/ifdown sequence. There is a crucial difference between the two things: in a chainloaded Barebox we go through the FEC driver probe again, before doing the next ifup. When going through probe a full reset of the FEC peripheral is done. Regards, Lucas _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox