Re: [PATCH v2 00/10] ARM: boards: add support for Enclustra Mercury SA2

[David Picard <david.picard@clermont.in2p3.fr>]

Hi,

I was about to submit v3, with the changes you requested.

I was waiting for you to decide wether I keep the fallback MAC 
addresses, as suggested by the manufacturer manual that I shared, or if 
I drop them and let Barebox set a random one.

David

Le 30/09/2025 à 12:40, Sascha Hauer a écrit :
> On Thu, 25 Sep 2025 13:59:07 +0200, David Picard wrote:
>> Add support for the Enclustra Mercury+ SA2, a Cyclone V based
>> SoC FPGA.
>> https://www.enclustra.com/en/products/system-on-chip-modules/mercury-sa2/
>>
>> The SoM provides a 64MiB NOR QSPI flash, DDR3, Ethernet PHY, RTC.
>>
>> The Cyclone V features a hardware ARM core (aka HPS) that can boot
>> from SD card (MMC), QSPI flash. This patch series focusses on MMC.
>>
>> [...]
> Applied, thanks!
>
> [01/10] Add handoff files
>          (no commit info)
> [02/10] Add Enclustra Mercury+ SA2 module
>          (no commit info)
> [03/10] ARM: dts: socfpga: use upstream SA2 device tree
>          (no commit info)
> [04/10] ARM: dts: socfpga: adapt upstream SA2 device tree
>          (no commit info)
> [05/10] boards: enclustra-sa2: read MAC address from EEPROM
>          (no commit info)
> [06/10] boards: enclustra-sa2: configure SI5338
>          (no commit info)
> [07/10] boards: enclustra-sa2: enable SI5338
>          (no commit info)
> [08/10] lib: add crc16 support
>          https://git.pengutronix.de/cgit/barebox/commit/?id=83865ed69b4d (link may not be stable)
> [09/10] nvmem: add support for Atmel sha204(a)
>          https://git.pengutronix.de/cgit/barebox/commit/?id=0837819622a2 (link may not be stable)
> [10/10] boards: enclustra-sa2: read S/N from EEPROM
>          (no commit info)
>
> Best regards,