From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Marco Felsch <m.felsch@pengutronix.de>, barebox@lists.infradead.org
Subject: Re: [PATCH 5/5] ARM: mach-imx: tzasc: add imx6q_tzc380_is_enabled
Date: Tue, 24 Jun 2025 12:36:07 +0200 [thread overview]
Message-ID: <9a5bf6cc-3f80-4b70-a057-a4d6b9c8d637@pengutronix.de> (raw)
In-Reply-To: <20250619152556.3749995-5-m.felsch@pengutronix.de>
On 6/19/25 17:25, Marco Felsch wrote:
> In preparation of adding an i.MX6QD optee-early helper add a helper to
> check if the early code e.g. PBL/BootROM enabled the TZC380 controllers
> on the i.MX6QDL.
>
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> arch/arm/mach-imx/tzasc.c | 15 +++++++++++++++
> include/mach/imx/tzasc.h | 1 +
> 2 files changed, 16 insertions(+)
>
> diff --git a/arch/arm/mach-imx/tzasc.c b/arch/arm/mach-imx/tzasc.c
> index aad6ece64f18..14b72386ad53 100644
> --- a/arch/arm/mach-imx/tzasc.c
> +++ b/arch/arm/mach-imx/tzasc.c
> @@ -76,6 +76,9 @@
> #define MX6_TZASC1_BASE 0x21d0000
> #define MX6_TZASC2_BASE 0x21d4000
>
> +#define MX6_GPR_TZASC1_EN BIT(0)
> +#define MX6_GPR_TZASC2_EN BIT(1)
> +
> #define GPR_TZASC_EN BIT(0)
> #define GPR_TZASC_ID_SWAP_BYPASS BIT(1)
> #define GPR_TZASC_EN_LOCK BIT(16)
> @@ -293,6 +296,18 @@ void imx6q_tzc380_early_ns_region1(void)
> TZC380_REGION_SP_NS_RW);
> }
>
> +bool imx6q_tzc380_is_enabled(void)
> +{
> + u32 __iomem *gpr = IOMEM(MX6_IOMUXC_BASE_ADDR);
> +
> + /*
> + * MX6_GPR_TZASC1_EN and MX6_GPR_TZASC2_EN are sticky bits which
> + * preserve their values once set until the next power-up cycle.
> + */
> + return (readl(&gpr[9]) & (MX6_GPR_TZASC1_EN | MX6_GPR_TZASC2_EN)) ==
> + (MX6_GPR_TZASC1_EN | MX6_GPR_TZASC2_EN);
> +}
> +
> void imx8m_tzc380_init(void)
> {
> u32 __iomem *gpr = IOMEM(MX8M_IOMUXC_GPR_BASE_ADDR);
> diff --git a/include/mach/imx/tzasc.h b/include/mach/imx/tzasc.h
> index 4d3f26fc82f1..59ec56a5ec60 100644
> --- a/include/mach/imx/tzasc.h
> +++ b/include/mach/imx/tzasc.h
> @@ -7,6 +7,7 @@
> #include <asm/system.h>
>
> void imx6q_tzc380_early_ns_region1(void);
> +bool imx6q_tzc380_is_enabled(void);
> void imx8m_tzc380_init(void);
> bool imx8m_tzc380_is_enabled(void);
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2025-06-24 11:19 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-19 15:25 [PATCH 1/5] ARM: i.MX6QDL: add TZASC1/2 defines Marco Felsch
2025-06-19 15:25 ` [PATCH 2/5] ARM: i.MX6Q: add imx6_get_mmdc_sdram_size Marco Felsch
2025-06-24 10:35 ` Ahmad Fatoum
2025-06-19 15:25 ` [PATCH 3/5] ARM: mach-imx: tzasc: add region configure helpers Marco Felsch
2025-06-20 12:49 ` Sascha Hauer
2025-06-23 8:23 ` Marco Felsch
2025-06-24 10:40 ` Ahmad Fatoum
2025-06-19 15:25 ` [PATCH 4/5] ARM: mach-imx: tzasc: add imx6q_tzc380_early_ns_region1() Marco Felsch
2025-06-24 10:38 ` Ahmad Fatoum
2025-06-24 10:55 ` Marco Felsch
2025-06-24 15:44 ` Ahmad Fatoum
2025-06-19 15:25 ` [PATCH 5/5] ARM: mach-imx: tzasc: add imx6q_tzc380_is_enabled Marco Felsch
2025-06-24 10:36 ` Ahmad Fatoum [this message]
2025-06-24 10:34 ` [PATCH 1/5] ARM: i.MX6QDL: add TZASC1/2 defines Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9a5bf6cc-3f80-4b70-a057-a4d6b9c8d637@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=m.felsch@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox