mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Matthias Fend <matthias.fend@emfend.at>
To: Michael Tretter <m.tretter@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] firmware: zynqmp-fpga: do not load PL with ONLY_BIN flag unless necessary
Date: Mon, 2 May 2022 18:00:28 +0200	[thread overview]
Message-ID: <9be29417-c0c4-ea84-4f34-8d2c04ddf737@emfend.at> (raw)
In-Reply-To: <20220502140052.GC2021@pengutronix.de>

Hi Michael,

Am 02.05.2022 um 16:00 schrieb Michael Tretter:
> On Sun, 01 May 2022 20:26:07 +0200, Matthias Fend wrote:
>> Since pmu-fw release 2018.3, the ZYNQMP_FPGA_BIT_ONLY_BIN flag is no
>> longer used. This wasn't a problem for a while, but in newer versions a
>> validation sequence will fail if this flag is set. This means that the PL
>> can no longer be loaded.
>>
>> Do not set the ZYNQMP_FPGA_BIT_ONLY_BIN flag unless absolutely necessary
>> to avoid this problem.
> 
> Thanks for the patch.
> 
>>
>> Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
>> ---
>>   drivers/firmware/zynqmp-fpga.c | 5 +++--
>>   1 file changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/firmware/zynqmp-fpga.c b/drivers/firmware/zynqmp-fpga.c
>> index 63d7398fd..db34ac2be 100644
>> --- a/drivers/firmware/zynqmp-fpga.c
>> +++ b/drivers/firmware/zynqmp-fpga.c
>> @@ -261,9 +261,10 @@ static int fpgamgr_program_finish(struct firmware_handler *fh)
>>   		goto err_free_dma;
>>   	}
>>   
>> -	if (mgr->features & ZYNQMP_PM_FEATURE_SIZE_NOT_NEEDED)
>> +	if (mgr->features & ZYNQMP_PM_FEATURE_SIZE_NOT_NEEDED) {
>> +		flags &= ~ZYNQMP_FPGA_BIT_ONLY_BIN;
> 
> I would prefer if the flag is initialized as unset and only set, if the
> bitstream does not have headers. This would be a lot clearer, than resetting
> the flag based on a version dependent feature flag with a different name.
> 
> If I understand correctly, the newer versions of the PMUFW don't support
> loading a bitstream without headers at all. Maybe we should have a feature
> flag for bitstreams without headers, but maybe it is enough to just let the
> PMUFW reject the bitstream in these cases.

I don't know if the PMU firmware now somehow support header-less 
bitstreams, but I can tell that it will fail in any case if this bit is set.
So, with recent versions, this bit simply never should be set.

Here is the check that will fail if this bit is set:
https://github.com/Xilinx/embeddedsw/blob/master/lib/sw_services/xilfpga/src/xilfpga.c#L643

Since I can't test the different combinations for old (pre-2018.3) PMU 
firmware, I would suggest leaving the bit set to avoid breaking something.

~Matthias

> 
> Michael
> 
>>   		buf_size = body_length;
>> -	else
>> +	} else
>>   		buf_size = addr + body_length;
>>   
>>   	status = mgr->eemi_ops->fpga_load((u64)addr, buf_size, flags);
>> -- 
>> 2.25.1
>>
>>
>> _______________________________________________
>> barebox mailing list
>> barebox@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/barebox
>>
> 

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


      reply	other threads:[~2022-05-02 16:02 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-01 18:26 Matthias Fend
2022-05-02 14:00 ` Michael Tretter
2022-05-02 16:00   ` Matthias Fend [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9be29417-c0c4-ea84-4f34-8d2c04ddf737@emfend.at \
    --to=matthias.fend@emfend.at \
    --cc=barebox@lists.infradead.org \
    --cc=m.tretter@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox