a9m2440_defconfig failed to compile

a9m2440_defconfig failed to compile

[Belisko Marek]

Hi,

following steps lead to compilation error (barebox v2010.09.0):

1. make a9m2440_defconfig ARCH=arm
2. make CROSS_COMPILE=arm-linux- ARCH=arm

error: arch/arm/boards/a9m2440/built-in.o: In function `nand_boot':
/home/open-nandra/projects/barebox/arch/arm/boards/a9m2440/a9m2440.c:183:
undefined reference to `s3c24x0_nand_load_image'

It seems in Kconfig for mach-s3c24xx is selected NAND_S3C24X0 but
missing CONFIG_MTD and CONFIG_NAND to properly compile
nand driver for s3c24xx.

Could I send a patch with updated defconfig or exist better solution?

Thanks in advance,

Marek

-- 
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
icq: 290551086
web: http://open-nandra.com

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: a9m2440_defconfig failed to compile

[Juergen Beisert]

Belisko Marek wrote:
> Hi,
>
> following steps lead to compilation error (barebox v2010.09.0):
>
> 1. make a9m2440_defconfig ARCH=arm
> 2. make CROSS_COMPILE=arm-linux- ARCH=arm
>
> error: arch/arm/boards/a9m2440/built-in.o: In function `nand_boot':
> /home/open-nandra/projects/barebox/arch/arm/boards/a9m2440/a9m2440.c:183:
> undefined reference to `s3c24x0_nand_load_image'
>
> It seems in Kconfig for mach-s3c24xx is selected NAND_S3C24X0 but
> missing CONFIG_MTD and CONFIG_NAND to properly compile
> nand driver for s3c24xx.
>
> Could I send a patch with updated defconfig or exist better solution?

Should be repaired in the menu and the source files. The defconfig is not the 
correct location to fix it. There are dependencies between these components 
that must be part of the menu.

jbe

-- 
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: a9m2440_defconfig failed to compile

[Belisko Marek]

On Tue, Sep 7, 2010 at 2:01 PM, Juergen Beisert <jbe@pengutronix.de> wrote:
> Belisko Marek wrote:
>> Hi,
>>
>> following steps lead to compilation error (barebox v2010.09.0):
>>
>> 1. make a9m2440_defconfig ARCH=arm
>> 2. make CROSS_COMPILE=arm-linux- ARCH=arm
>>
>> error: arch/arm/boards/a9m2440/built-in.o: In function `nand_boot':
>> /home/open-nandra/projects/barebox/arch/arm/boards/a9m2440/a9m2440.c:183:
>> undefined reference to `s3c24x0_nand_load_image'
>>
>> It seems in Kconfig for mach-s3c24xx is selected NAND_S3C24X0 but
>> missing CONFIG_MTD and CONFIG_NAND to properly compile
>> nand driver for s3c24xx.
>>
>> Could I send a patch with updated defconfig or exist better solution?
>
> Should be repaired in the menu and the source files. The defconfig is not the
> correct location to fix it. There are dependencies between these components
> that must be part of the menu.
Not sure which menu type do you think?
>
> jbe
>
> --
> Pengutronix e.K.                              | Juergen Beisert             |
> Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
> Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
> Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |
>

Thanks,

Marek

-- 
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
icq: 290551086
web: http://open-nandra.com

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: a9m2440_defconfig failed to compile

[Jean-Christophe PLAGNIOL-VILLARD]

On 14:59 Tue 07 Sep     , Belisko Marek wrote:
> On Tue, Sep 7, 2010 at 2:01 PM, Juergen Beisert <jbe@pengutronix.de> wrote:
> > Belisko Marek wrote:
> >> Hi,
> >>
> >> following steps lead to compilation error (barebox v2010.09.0):
> >>
> >> 1. make a9m2440_defconfig ARCH=arm
> >> 2. make CROSS_COMPILE=arm-linux- ARCH=arm
> >>
> >> error: arch/arm/boards/a9m2440/built-in.o: In function `nand_boot':
> >> /home/open-nandra/projects/barebox/arch/arm/boards/a9m2440/a9m2440.c:183:
> >> undefined reference to `s3c24x0_nand_load_image'
> >>
> >> It seems in Kconfig for mach-s3c24xx is selected NAND_S3C24X0 but
> >> missing CONFIG_MTD and CONFIG_NAND to properly compile
> >> nand driver for s3c24xx.
> >>
> >> Could I send a patch with updated defconfig or exist better solution?
> >
> > Should be repaired in the menu and the source files. The defconfig is not the
> > correct location to fix it. There are dependencies between these components
> > that must be part of the menu.
> Not sure which menu type do you think?
Kconfig file

Best Regards,
J.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox