From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-db8eur05on2127.outbound.protection.outlook.com ([40.107.20.127] helo=EUR05-DB8-obe.outbound.protection.outlook.com) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k5lJt-0001Da-O4 for barebox@lists.infradead.org; Wed, 12 Aug 2020 07:37:11 +0000 From: "Koelle, Holger" Date: Wed, 12 Aug 2020 07:36:58 +0000 Message-ID: Content-Language: de-DE MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Enable Display/Splash on Phycore am335x with barebox 2020.01.0 To: "barebox@lists.infradead.org" Hi everybody, This week i've tried to enable our Display (which working without problems = in Linuxkernel 4.19.94) in Barebox without success. I've patched the Devicetree similar to am335x-evm.dts with our display timi= ngs and the other values. But I got no fb0 device or a matching driver for = the panel/gpu. In the drivers section I can't find any driver which matching tilcdc and am= 335x-tilcdc like described in the barebox documentation. Of_dump shows that the panel is there, but drvinfo says there is no driver.= I've tried to use the simple-panel driver but without success... So my Question : Is it possible to enable the drm (gpu) unit in Barebox 20= 20.01.0 at the am335x phycore board or is it not supported? Regards, H.K=F6lle _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox