RE: Barebox on a 3730

["Premi, Sanjeev" <premi@ti.com>]

> -----Original Message-----
> From: barebox-bounces@lists.infradead.org 
> [mailto:barebox-bounces@lists.infradead.org] On Behalf Of 
> Orjan Friberg
> Sent: Thursday, December 02, 2010 10:10 PM
> To: Belisko Marek
> Cc: barebox@lists.infradead.org
> Subject: Re: Barebox on a 3730
> 
> On 2010-12-02 16:13, Belisko Marek wrote:
> > Not have omap3530 or other but have same issue with 
> different board type.
> > Problem was with clock setup for serial. Just an idea check 
> if clock is correct
> > according data sheet. Maybe 37xx differs from 35xx ;)
> 
> Clocking looks like it should be the same but just out of curiosity, 
> what issue did you have with the clock setup?  (What was bad, 
> how did it 
> manifest itself.)
> 
> I haven't found any 3530 vs. 3730 diffs in the uart configuration in 
> u-boot or linux (though there is a silicon errata fix in the latest 
> linux-omap-2.6 kernel related to not reading from an empty FIFO).
> 
Look for the AM37x TRM here:
http://focus.ti.com/docs/prod/folders/print/am3715.html

> But then again, they could potentially both be relying on the first 
> stage bootloader setting things upp correctly (and then not 
> touching it).
> 
> 
> Thanks,
> Orjan
> 
> -- 
> Orjan Friberg
> FlatFrog Laboratories AB
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox