Hi Sascha,
Hi Franck,
Is there a reason to block on putc if JTAG is not connected? Without
On Sat, Jun 04, 2011 at 09:29:29PM +0200, franck.jullien@gmail.com wrote:
> From: Franck Jullien <franck.jullien@gmail.com>
>
> Add ALtera JTAG UART driver.
>
> Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
> ---
> drivers/serial/Kconfig | 10 +++
> drivers/serial/Makefile | 1 +
> drivers/serial/serial_altera_jtag.c | 106 +++++++++++++++++++++++++++++++++++
> 3 files changed, 117 insertions(+), 0 deletions(-)
> create mode 100644 drivers/serial/serial_altera_jtag.c
>
> diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> index 9e05f4b..c8f9ecd 100644
> --- a/drivers/serial/Kconfig
> +++ b/drivers/serial/Kconfig
> @@ -48,6 +48,16 @@ config DRIVER_SERIAL_ALTERA
> default y
> bool "Altera serial driver"
>
> +config DRIVER_SERIAL_ALTERA_JTAG
> + depends on NIOS2
> + default n
> + bool "Altera JTAG serial driver"
> +
> +config ALTERA_JTAG_UART_BYPASS
> + depends on DRIVER_SERIAL_ALTERA_JTAG
> + default y
> + bool "Don't block on serial putc if JTAG is not connected"
strong reasons I think this option should be removed.
Sascha
> _______________________________________________
> +
> config DRIVER_SERIAL_NS16550
> default n
> bool "NS16550 serial driver"
> diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
> index df9e705..8b56d15 100644
> --- a/drivers/serial/Makefile
> +++ b/drivers/serial/Makefile
> @@ -17,3 +17,4 @@ obj-$(CONFIG_DRIVER_SERIAL_NS16550) += serial_ns16550.o
> obj-$(CONFIG_DRIVER_SERIAL_PL010) += serial_pl010.o
> obj-$(CONFIG_DRIVER_SERIAL_S3C24X0) += serial_s3c24x0.o
> obj-$(CONFIG_DRIVER_SERIAL_ALTERA) += serial_altera.o
> +obj-$(CONFIG_DRIVER_SERIAL_ALTERA_JTAG) += serial_altera_jtag.o
> diff --git a/drivers/serial/serial_altera_jtag.c b/drivers/serial/serial_altera_jtag.c
> new file mode 100644
> index 0000000..70bc5a9
> --- /dev/null
> +++ b/drivers/serial/serial_altera_jtag.c
> @@ -0,0 +1,106 @@
> +/*
> + * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
> + * Scott McNutt <smcnutt@psyent.com>
> + *
> + * (C) Copyright 2011 - Franck JULLIEN <elec4fun@gmail.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <driver.h>
> +#include <init.h>
> +#include <malloc.h>
> +#include <asm/io.h>
> +#include <asm/nios2-io.h>
> +
> +static int altera_serial_jtag_setbaudrate(struct console_device *cdev, int baudrate)
> +{
> + return 0;
> +}
> +
> +static void altera_serial_jtag_putc(struct console_device *cdev, char c)
> +{
> + struct nios_jtag *jtag = (struct nios_jtag *)cdev->dev->map_base;
> + uint32_t st;
> +
> + while (1) {
> + st = readl(&jtag->control);
> + if (NIOS_JTAG_WSPACE(st))
> + break;
> +#ifdef CONFIG_ALTERA_JTAG_UART_BYPASS
> + if (!(st & NIOS_JTAG_AC)) /* no connection */
> + return;
> +#endif
> + }
> +
> + writel(c, &jtag->data);
> +}
> +
> +static int altera_serial_jtag_tstc(struct console_device *cdev)
> +{
> + struct nios_jtag *jtag = (struct nios_jtag *)cdev->dev->map_base;
> +
> + return readl(&jtag->control) & NIOS_JTAG_RRDY;
> +}
> +
> +static int altera_serial_jtag_getc(struct console_device *cdev)
> +{
> + struct nios_jtag *jtag = (struct nios_jtag *)cdev->dev->map_base;
> + uint32_t val;
> +
> + while (1) {
> + val = readl(&jtag->data);
> + if (val & NIOS_JTAG_RVALID)
> + break;
> + }
> +
> + return val & 0xFF;
> +}
> +
> +static int altera_serial_jtag_probe(struct device_d *dev) {
> +
> + struct console_device *cdev;
> +
> + cdev = malloc(sizeof(struct console_device));
> + dev->type_data = cdev;
> + cdev->dev = dev;
> + cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
> + cdev->tstc = altera_serial_jtag_tstc;
> + cdev->putc = altera_serial_jtag_putc;
> + cdev->getc = altera_serial_jtag_getc;
> + cdev->setbrg = altera_serial_jtag_setbaudrate;
> +
> + console_register(cdev);
> +
> + return 0;
> +}
> +
> +static struct driver_d altera_serial_jtag_driver = {
> + .name = "altera_serial_jtag",
> + .probe = altera_serial_jtag_probe,
> +};
> +
> +static int altera_serial_jtag_init(void)
> +{
> + return register_driver(&altera_serial_jtag_driver);
> +}
> +
> +console_initcall(altera_serial_jtag_init);
> +
> --
> 1.7.0.4
>
>
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |