mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH] [Nios2]: Add Altera JTAG UART driver
@ 2011-06-04 19:29 franck.jullien
  2011-06-06  6:25 ` Sascha Hauer
  0 siblings, 1 reply; 3+ messages in thread
From: franck.jullien @ 2011-06-04 19:29 UTC (permalink / raw)
  To: barebox

From: Franck Jullien <franck.jullien@gmail.com>

Add ALtera JTAG UART driver.

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
---
 drivers/serial/Kconfig              |   10 +++
 drivers/serial/Makefile             |    1 +
 drivers/serial/serial_altera_jtag.c |  106 +++++++++++++++++++++++++++++++++++
 3 files changed, 117 insertions(+), 0 deletions(-)
 create mode 100644 drivers/serial/serial_altera_jtag.c

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 9e05f4b..c8f9ecd 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -48,6 +48,16 @@ config DRIVER_SERIAL_ALTERA
 	default y
 	bool "Altera serial driver"
 
+config DRIVER_SERIAL_ALTERA_JTAG
+	depends on NIOS2
+	default n
+	bool "Altera JTAG serial driver"
+
+config ALTERA_JTAG_UART_BYPASS
+	depends on DRIVER_SERIAL_ALTERA_JTAG
+	default y
+	bool "Don't block on serial putc if JTAG is not connected"
+
 config DRIVER_SERIAL_NS16550
 	default n
 	bool "NS16550 serial driver"
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index df9e705..8b56d15 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_DRIVER_SERIAL_NS16550)		+= serial_ns16550.o
 obj-$(CONFIG_DRIVER_SERIAL_PL010)		+= serial_pl010.o
 obj-$(CONFIG_DRIVER_SERIAL_S3C24X0)		+= serial_s3c24x0.o
 obj-$(CONFIG_DRIVER_SERIAL_ALTERA)		+= serial_altera.o
+obj-$(CONFIG_DRIVER_SERIAL_ALTERA_JTAG)		+= serial_altera_jtag.o
diff --git a/drivers/serial/serial_altera_jtag.c b/drivers/serial/serial_altera_jtag.c
new file mode 100644
index 0000000..70bc5a9
--- /dev/null
+++ b/drivers/serial/serial_altera_jtag.c
@@ -0,0 +1,106 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * (C) Copyright 2011 - Franck JULLIEN <elec4fun@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/nios2-io.h>
+
+static int altera_serial_jtag_setbaudrate(struct console_device *cdev, int baudrate)
+{
+	return 0;
+}
+
+static void altera_serial_jtag_putc(struct console_device *cdev, char c)
+{
+	struct nios_jtag *jtag = (struct nios_jtag *)cdev->dev->map_base;
+	uint32_t st;
+
+	while (1) {
+		st = readl(&jtag->control);
+		if (NIOS_JTAG_WSPACE(st))
+			break;
+#ifdef CONFIG_ALTERA_JTAG_UART_BYPASS
+		if (!(st & NIOS_JTAG_AC)) /* no connection */
+			return;
+#endif
+	}
+
+	writel(c, &jtag->data);
+}
+
+static int altera_serial_jtag_tstc(struct console_device *cdev)
+{
+	struct nios_jtag *jtag = (struct nios_jtag *)cdev->dev->map_base;
+
+	return readl(&jtag->control) & NIOS_JTAG_RRDY;
+}
+
+static int altera_serial_jtag_getc(struct console_device *cdev)
+{
+	struct nios_jtag *jtag = (struct nios_jtag *)cdev->dev->map_base;
+	uint32_t val;
+	
+	while (1) {
+		val = readl(&jtag->data);
+		if (val & NIOS_JTAG_RVALID)
+			break;
+	}
+
+	return val & 0xFF;
+}
+
+static int altera_serial_jtag_probe(struct device_d *dev) {
+
+	struct console_device *cdev;
+
+	cdev = malloc(sizeof(struct console_device));
+	dev->type_data = cdev;
+	cdev->dev = dev;
+	cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
+	cdev->tstc = altera_serial_jtag_tstc;
+	cdev->putc = altera_serial_jtag_putc;
+	cdev->getc = altera_serial_jtag_getc;
+	cdev->setbrg = altera_serial_jtag_setbaudrate;
+
+	console_register(cdev);
+
+	return 0;
+}
+
+static struct driver_d altera_serial_jtag_driver = {
+	.name = "altera_serial_jtag",
+	.probe = altera_serial_jtag_probe,
+};
+
+static int altera_serial_jtag_init(void)
+{
+	return register_driver(&altera_serial_jtag_driver);
+}
+
+console_initcall(altera_serial_jtag_init);
+
-- 
1.7.0.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH] [Nios2]: Add Altera JTAG UART driver
  2011-06-04 19:29 [PATCH] [Nios2]: Add Altera JTAG UART driver franck.jullien
@ 2011-06-06  6:25 ` Sascha Hauer
  2011-06-06  7:04   ` Franck JULLIEN
  0 siblings, 1 reply; 3+ messages in thread
From: Sascha Hauer @ 2011-06-06  6:25 UTC (permalink / raw)
  To: franck.jullien; +Cc: barebox

Hi Franck,

On Sat, Jun 04, 2011 at 09:29:29PM +0200, franck.jullien@gmail.com wrote:
> From: Franck Jullien <franck.jullien@gmail.com>
> 
> Add ALtera JTAG UART driver.
> 
> Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
> ---
>  drivers/serial/Kconfig              |   10 +++
>  drivers/serial/Makefile             |    1 +
>  drivers/serial/serial_altera_jtag.c |  106 +++++++++++++++++++++++++++++++++++
>  3 files changed, 117 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/serial/serial_altera_jtag.c
> 
> diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> index 9e05f4b..c8f9ecd 100644
> --- a/drivers/serial/Kconfig
> +++ b/drivers/serial/Kconfig
> @@ -48,6 +48,16 @@ config DRIVER_SERIAL_ALTERA
>  	default y
>  	bool "Altera serial driver"
>  
> +config DRIVER_SERIAL_ALTERA_JTAG
> +	depends on NIOS2
> +	default n
> +	bool "Altera JTAG serial driver"
> +
> +config ALTERA_JTAG_UART_BYPASS
> +	depends on DRIVER_SERIAL_ALTERA_JTAG
> +	default y
> +	bool "Don't block on serial putc if JTAG is not connected"

Is there a reason to block on putc if JTAG is not connected? Without
strong reasons I think this option should be removed.

Sascha

> +
>  config DRIVER_SERIAL_NS16550
>  	default n
>  	bool "NS16550 serial driver"
> diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
> index df9e705..8b56d15 100644
> --- a/drivers/serial/Makefile
> +++ b/drivers/serial/Makefile
> @@ -17,3 +17,4 @@ obj-$(CONFIG_DRIVER_SERIAL_NS16550)		+= serial_ns16550.o
>  obj-$(CONFIG_DRIVER_SERIAL_PL010)		+= serial_pl010.o
>  obj-$(CONFIG_DRIVER_SERIAL_S3C24X0)		+= serial_s3c24x0.o
>  obj-$(CONFIG_DRIVER_SERIAL_ALTERA)		+= serial_altera.o
> +obj-$(CONFIG_DRIVER_SERIAL_ALTERA_JTAG)		+= serial_altera_jtag.o
> diff --git a/drivers/serial/serial_altera_jtag.c b/drivers/serial/serial_altera_jtag.c
> new file mode 100644
> index 0000000..70bc5a9
> --- /dev/null
> +++ b/drivers/serial/serial_altera_jtag.c
> @@ -0,0 +1,106 @@
> +/*
> + * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
> + * Scott McNutt <smcnutt@psyent.com>
> + *
> + * (C) Copyright 2011 - Franck JULLIEN <elec4fun@gmail.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <driver.h>
> +#include <init.h>
> +#include <malloc.h>
> +#include <asm/io.h>
> +#include <asm/nios2-io.h>
> +
> +static int altera_serial_jtag_setbaudrate(struct console_device *cdev, int baudrate)
> +{
> +	return 0;
> +}
> +
> +static void altera_serial_jtag_putc(struct console_device *cdev, char c)
> +{
> +	struct nios_jtag *jtag = (struct nios_jtag *)cdev->dev->map_base;
> +	uint32_t st;
> +
> +	while (1) {
> +		st = readl(&jtag->control);
> +		if (NIOS_JTAG_WSPACE(st))
> +			break;
> +#ifdef CONFIG_ALTERA_JTAG_UART_BYPASS
> +		if (!(st & NIOS_JTAG_AC)) /* no connection */
> +			return;
> +#endif
> +	}
> +
> +	writel(c, &jtag->data);
> +}
> +
> +static int altera_serial_jtag_tstc(struct console_device *cdev)
> +{
> +	struct nios_jtag *jtag = (struct nios_jtag *)cdev->dev->map_base;
> +
> +	return readl(&jtag->control) & NIOS_JTAG_RRDY;
> +}
> +
> +static int altera_serial_jtag_getc(struct console_device *cdev)
> +{
> +	struct nios_jtag *jtag = (struct nios_jtag *)cdev->dev->map_base;
> +	uint32_t val;
> +	
> +	while (1) {
> +		val = readl(&jtag->data);
> +		if (val & NIOS_JTAG_RVALID)
> +			break;
> +	}
> +
> +	return val & 0xFF;
> +}
> +
> +static int altera_serial_jtag_probe(struct device_d *dev) {
> +
> +	struct console_device *cdev;
> +
> +	cdev = malloc(sizeof(struct console_device));
> +	dev->type_data = cdev;
> +	cdev->dev = dev;
> +	cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
> +	cdev->tstc = altera_serial_jtag_tstc;
> +	cdev->putc = altera_serial_jtag_putc;
> +	cdev->getc = altera_serial_jtag_getc;
> +	cdev->setbrg = altera_serial_jtag_setbaudrate;
> +
> +	console_register(cdev);
> +
> +	return 0;
> +}
> +
> +static struct driver_d altera_serial_jtag_driver = {
> +	.name = "altera_serial_jtag",
> +	.probe = altera_serial_jtag_probe,
> +};
> +
> +static int altera_serial_jtag_init(void)
> +{
> +	return register_driver(&altera_serial_jtag_driver);
> +}
> +
> +console_initcall(altera_serial_jtag_init);
> +
> -- 
> 1.7.0.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH] [Nios2]: Add Altera JTAG UART driver
  2011-06-06  6:25 ` Sascha Hauer
@ 2011-06-06  7:04   ` Franck JULLIEN
  0 siblings, 0 replies; 3+ messages in thread
From: Franck JULLIEN @ 2011-06-06  7:04 UTC (permalink / raw)
  To: Sascha Hauer; +Cc: barebox


[-- Attachment #1.1: Type: text/plain, Size: 6333 bytes --]

Hi Sascha,

2011/6/6 Sascha Hauer <s.hauer@pengutronix.de>

> Hi Franck,
>
> On Sat, Jun 04, 2011 at 09:29:29PM +0200, franck.jullien@gmail.com wrote:
> > From: Franck Jullien <franck.jullien@gmail.com>
> >
> > Add ALtera JTAG UART driver.
> >
> > Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
> > ---
> >  drivers/serial/Kconfig              |   10 +++
> >  drivers/serial/Makefile             |    1 +
> >  drivers/serial/serial_altera_jtag.c |  106
> +++++++++++++++++++++++++++++++++++
> >  3 files changed, 117 insertions(+), 0 deletions(-)
> >  create mode 100644 drivers/serial/serial_altera_jtag.c
> >
> > diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> > index 9e05f4b..c8f9ecd 100644
> > --- a/drivers/serial/Kconfig
> > +++ b/drivers/serial/Kconfig
> > @@ -48,6 +48,16 @@ config DRIVER_SERIAL_ALTERA
> >       default y
> >       bool "Altera serial driver"
> >
> > +config DRIVER_SERIAL_ALTERA_JTAG
> > +     depends on NIOS2
> > +     default n
> > +     bool "Altera JTAG serial driver"
> > +
> > +config ALTERA_JTAG_UART_BYPASS
> > +     depends on DRIVER_SERIAL_ALTERA_JTAG
> > +     default y
> > +     bool "Don't block on serial putc if JTAG is not connected"
>
> Is there a reason to block on putc if JTAG is not connected? Without
> strong reasons I think this option should be removed.
>
>
Well, there is not....I copied this from u-boot but I never used this
feature.
You're right, I'll remove it.

Franck.



> Sascha
>
> > +
> >  config DRIVER_SERIAL_NS16550
> >       default n
> >       bool "NS16550 serial driver"
> > diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
> > index df9e705..8b56d15 100644
> > --- a/drivers/serial/Makefile
> > +++ b/drivers/serial/Makefile
> > @@ -17,3 +17,4 @@ obj-$(CONFIG_DRIVER_SERIAL_NS16550)         +=
> serial_ns16550.o
> >  obj-$(CONFIG_DRIVER_SERIAL_PL010)            += serial_pl010.o
> >  obj-$(CONFIG_DRIVER_SERIAL_S3C24X0)          += serial_s3c24x0.o
> >  obj-$(CONFIG_DRIVER_SERIAL_ALTERA)           += serial_altera.o
> > +obj-$(CONFIG_DRIVER_SERIAL_ALTERA_JTAG)              +=
> serial_altera_jtag.o
> > diff --git a/drivers/serial/serial_altera_jtag.c
> b/drivers/serial/serial_altera_jtag.c
> > new file mode 100644
> > index 0000000..70bc5a9
> > --- /dev/null
> > +++ b/drivers/serial/serial_altera_jtag.c
> > @@ -0,0 +1,106 @@
> > +/*
> > + * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
> > + * Scott McNutt <smcnutt@psyent.com>
> > + *
> > + * (C) Copyright 2011 - Franck JULLIEN <elec4fun@gmail.com>
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > +#include <common.h>
> > +#include <driver.h>
> > +#include <init.h>
> > +#include <malloc.h>
> > +#include <asm/io.h>
> > +#include <asm/nios2-io.h>
> > +
> > +static int altera_serial_jtag_setbaudrate(struct console_device *cdev,
> int baudrate)
> > +{
> > +     return 0;
> > +}
> > +
> > +static void altera_serial_jtag_putc(struct console_device *cdev, char c)
> > +{
> > +     struct nios_jtag *jtag = (struct nios_jtag *)cdev->dev->map_base;
> > +     uint32_t st;
> > +
> > +     while (1) {
> > +             st = readl(&jtag->control);
> > +             if (NIOS_JTAG_WSPACE(st))
> > +                     break;
> > +#ifdef CONFIG_ALTERA_JTAG_UART_BYPASS
> > +             if (!(st & NIOS_JTAG_AC)) /* no connection */
> > +                     return;
> > +#endif
> > +     }
> > +
> > +     writel(c, &jtag->data);
> > +}
> > +
> > +static int altera_serial_jtag_tstc(struct console_device *cdev)
> > +{
> > +     struct nios_jtag *jtag = (struct nios_jtag *)cdev->dev->map_base;
> > +
> > +     return readl(&jtag->control) & NIOS_JTAG_RRDY;
> > +}
> > +
> > +static int altera_serial_jtag_getc(struct console_device *cdev)
> > +{
> > +     struct nios_jtag *jtag = (struct nios_jtag *)cdev->dev->map_base;
> > +     uint32_t val;
> > +
> > +     while (1) {
> > +             val = readl(&jtag->data);
> > +             if (val & NIOS_JTAG_RVALID)
> > +                     break;
> > +     }
> > +
> > +     return val & 0xFF;
> > +}
> > +
> > +static int altera_serial_jtag_probe(struct device_d *dev) {
> > +
> > +     struct console_device *cdev;
> > +
> > +     cdev = malloc(sizeof(struct console_device));
> > +     dev->type_data = cdev;
> > +     cdev->dev = dev;
> > +     cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
> > +     cdev->tstc = altera_serial_jtag_tstc;
> > +     cdev->putc = altera_serial_jtag_putc;
> > +     cdev->getc = altera_serial_jtag_getc;
> > +     cdev->setbrg = altera_serial_jtag_setbaudrate;
> > +
> > +     console_register(cdev);
> > +
> > +     return 0;
> > +}
> > +
> > +static struct driver_d altera_serial_jtag_driver = {
> > +     .name = "altera_serial_jtag",
> > +     .probe = altera_serial_jtag_probe,
> > +};
> > +
> > +static int altera_serial_jtag_init(void)
> > +{
> > +     return register_driver(&altera_serial_jtag_driver);
> > +}
> > +
> > +console_initcall(altera_serial_jtag_init);
> > +
> > --
> > 1.7.0.4
> >
> >
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> >
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
>

[-- Attachment #1.2: Type: text/html, Size: 8552 bytes --]

[-- Attachment #2: Type: text/plain, Size: 149 bytes --]

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2011-06-06  7:04 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-06-04 19:29 [PATCH] [Nios2]: Add Altera JTAG UART driver franck.jullien
2011-06-06  6:25 ` Sascha Hauer
2011-06-06  7:04   ` Franck JULLIEN

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox