* AM3517EVM port
@ 2011-05-11 22:06 Yegor Yefremov
2011-05-12 6:03 ` Sascha Hauer
0 siblings, 1 reply; 3+ messages in thread
From: Yegor Yefremov @ 2011-05-11 22:06 UTC (permalink / raw)
To: barebox
Hello,
has anyone ported AM3517EVM board or other omap3517 based board to
barebox? I couldn't find any patches.
The second question is about OMAP boot procedure. Can I just rename
barebox to u-boot.bin and let it be loaded by x-loader?
Regards,
Yegor
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: AM3517EVM port
2011-05-11 22:06 AM3517EVM port Yegor Yefremov
@ 2011-05-12 6:03 ` Sascha Hauer
2011-05-12 7:45 ` Yegor Yefremov
0 siblings, 1 reply; 3+ messages in thread
From: Sascha Hauer @ 2011-05-12 6:03 UTC (permalink / raw)
To: Yegor Yefremov; +Cc: barebox
Hi Yegor,
On Thu, May 12, 2011 at 12:06:15AM +0200, Yegor Yefremov wrote:
> Hello,
>
> has anyone ported AM3517EVM board or other omap3517 based board to
> barebox? I couldn't find any patches.
No, I am not aware of any patches for this. How different is the
omap3517 from the one on the beagle board?
>
> The second question is about OMAP boot procedure. Can I just rename
> barebox to u-boot.bin and let it be loaded by x-loader?
More specifically barebox.bin to u-boot.bin, yes. This at least works on
the beagle and panda boards. barebox can also act as an x-loader aswell
(in which case it loads barebox.bin as second stage). See the *xload*
defconfigs.
Regards
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: AM3517EVM port
2011-05-12 6:03 ` Sascha Hauer
@ 2011-05-12 7:45 ` Yegor Yefremov
0 siblings, 0 replies; 3+ messages in thread
From: Yegor Yefremov @ 2011-05-12 7:45 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
Hi Sascha,
>> has anyone ported AM3517EVM board or other omap3517 based board to
>> barebox? I couldn't find any patches.
>
> No, I am not aware of any patches for this. How different is the
> omap3517 from the one on the beagle board?
I hope it is not so different. But in the first line OMAP3517 is
industrial grade SoC with built-in Ethernet and CAN support. I took
beagle port as a template and try to port the stuff from TI's u-boot.
>> The second question is about OMAP boot procedure. Can I just rename
>> barebox to u-boot.bin and let it be loaded by x-loader?
>
> More specifically barebox.bin to u-boot.bin, yes. This at least works on
> the beagle and panda boards. barebox can also act as an x-loader aswell
> (in which case it loads barebox.bin as second stage). See the *xload*
> defconfigs.
O.K. I see. Thank you for your help.
Regards,
Yegor
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-05-12 7:45 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-05-11 22:06 AM3517EVM port Yegor Yefremov
2011-05-12 6:03 ` Sascha Hauer
2011-05-12 7:45 ` Yegor Yefremov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox