From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp.codeaurora.org ([198.145.11.231]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1VgGiZ-0003Wy-S9 for barebox@lists.infradead.org; Tue, 12 Nov 2013 16:21:32 +0000 Mime-Version: 1.0 (Mac OS X Mail 7.0 \(1822\)) From: Kumar Gala In-Reply-To: <1384266701-12608-4-git-send-email-s.hauer@pengutronix.de> Date: Tue, 12 Nov 2013 10:21:02 -0600 Message-Id: References: <1384266701-12608-1-git-send-email-s.hauer@pengutronix.de> <1384266701-12608-4-git-send-email-s.hauer@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 3/4] DT: Add binding for Altera FPGAs in passive-serial mode To: Sascha Hauer Cc: barebox@lists.infradead.org, jbe@pengutronix.de, devicetree@vger.kernel.org On Nov 12, 2013, at 8:31 AM, Sascha Hauer wrote: > Signed-off-by: Sascha Hauer > Cc: devicetree@vger.kernel.org > --- > .../devicetree/bindings/firmware/altr,passive-serial.txt | 13 ++++++++= +++++ > 1 file changed, 13 insertions(+) > create mode 100644 Documentation/devicetree/bindings/firmware/altr,passiv= e-serial.txt > = > diff --git a/Documentation/devicetree/bindings/firmware/altr,passive-seri= al.txt b/Documentation/devicetree/bindings/firmware/altr,passive-serial.txt > new file mode 100644 > index 0000000..6d40c91 > --- /dev/null > +++ b/Documentation/devicetree/bindings/firmware/altr,passive-serial.txt > @@ -0,0 +1,13 @@ > +Altera FPGAs in passive serial mode > +----------------------------------- > + > +This binding defines the control interface to Altera FPGAs in > +passive serial mode. This is used to upload the firmware and > +to start the FPGA. > + > +Required properties: > +- compatible: shall be "altr,passive-serial=94 This doesn=92t seem quite descriptive enough, easy to confuse with a serial= port. > +- reg: SPI chip select Is this a SPI device than? > +- nstat-gpio: Specify GPIO for controlling the nstat pin > +- confd-gpio: Specify GPIO for controlling the confd pin > +- nconfig-gpio: Specify GPIO for controlling the nconfig pin > -- = > 1.8.4.2 > = > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox