Re: [PATCH 2/2] Switched SAMA5D4EK development board to the newer environment method.

[Doug Brainard <dbrainard@brainardinsight.com>]

Okay, looking at some the patches you sent, I think it will resolve
the issue.  I'm still too new to this git patch concept to be sure how
to grab it to try it out, so I'll just wait until it gets committed
and then modify my changes to work well with it.

If it's a quick command I need to call, let me know and I'll try out the patch.

Thanks,

Doug

On Thu, Feb 12, 2015 at 2:13 AM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> On Wed, Feb 11, 2015 at 10:39:52AM -0700, Doug Brainard wrote:
>> So it looks like the following line in mtdparts-add is causing the
>> "nand0." issue:
>>
>> addpart -n /dev/${device} "$parts" || exit
>>
>> The old environment didn't use the "-n".  Removing the "-n" fixes the
>> issue and gives it the same functionality as the old environment did.
>>
>> So the question is how should I fix this?  I could remove it in the
>> default environment, but that would require all other boards using the
>> new environment to update.
>>
>> Or, I can add my own env/bin/mtdparts-add script for the board and
>> remove the "-n" from there instead which would leave the other
>> projects alone.  I'm assuming I should use this option as the fix, but
>> I wanted to confirm that with you.
>
> I would rather add a '-n' option to the mtdparts-add script. Anyway, I
> just sent a series updating the partition handling. Among other things
> I hope that this fixes the naming issue.
>
> Sascha
>
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox