Re: Passing kernel arguments - SAMA5D4EK

[Doug Brainard <dbrainard@brainardinsight.com>]

> Couldn't you add "ubi.mtd=8 ubi.mtd=9" and rootfs_mtdblock_nand=10
> instead?

I had thought that barebox had a need to know where the rootfs was
located, which is why I hadn't tried that.  Turns out that it worked
perfectly for the ubi.mtd settings.  Thank you!  Any idea how
"noinitrd" is getting added to the bootargs?  I need to replace that
with a "rw".

> Note that we started with trying to build a generic default environment
> which at some point grew into a monster. We now have the 2nd version of
> the generic default environment which is much better. Unfortunately
> usage of this new default environment is board specific and your board
> isn't converted yet. If you are interested I can show you the steps to
> convert it.

I would be interested in helping with this conversion.

Thanks,

Doug

On Tue, Feb 3, 2015 at 2:16 AM, Bo Shen <voice.shen@atmel.com> wrote:
> Hi Sascha,
>
> On 02/03/2015 04:59 PM, Sascha Hauer wrote:
>>
>> Note that we started with trying to build a generic default environment
>> which at some point grew into a monster. We now have the 2nd version of
>> the generic default environment which is much better. Unfortunately
>> usage of this new default environment is board specific and your board
>> isn't converted yet. If you are interested I can show you the steps to
>> convert it.
>
>
> I am interested in this, could you show me the steps to convert it?
> Thanks.
>
>> Sascha
>
>
> Best Regards,
> Bo Shen

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox