From: Doug Brainard <dbrainard@brainardinsight.com>
To: Bo Shen <voice.shen@atmel.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/2] SAMA5D4EK - Now mostly supports booting Android from NAND.
Date: Tue, 10 Feb 2015 21:02:46 -0700 [thread overview]
Message-ID: <CA+nEJinrt4TiRhESHZOepq-qyTq+Tj+wuMJfSv0Lxfjv2erEvA@mail.gmail.com> (raw)
In-Reply-To: <54DAB0AA.7090402@atmel.com>
Sorry, this was more me not understanding "git send-email" the first
time and how to keep it only sending the latest commit.
Doug
On Tue, Feb 10, 2015 at 6:30 PM, Bo Shen <voice.shen@atmel.com> wrote:
> Hi Doug Brainard,
>
> On 02/10/2015 10:28 PM, Doug Brainard wrote:
>>
>> ---
>> arch/arm/boards/sama5d4ek/env/config | 14 +++++++-------
>> 1 file changed, 7 insertions(+), 7 deletions(-)
>
>
> As this file will be totally discard in patch 2/2. So, I think no need to
> add this patch. And also it change the default boot setting to Android only.
>
>
>> diff --git a/arch/arm/boards/sama5d4ek/env/config
>> b/arch/arm/boards/sama5d4ek/env/config
>> index 1007345..ee86c07 100644
>> --- a/arch/arm/boards/sama5d4ek/env/config
>> +++ b/arch/arm/boards/sama5d4ek/env/config
>> @@ -11,16 +11,16 @@ ip=dhcp
>> #eth0.serverip=a.b.c.d
>>
>> # can be either 'nfs', 'tftp', 'nor' or 'nand'
>> -kernel_loc=nfs
>> +kernel_loc=nand
>> # can be either 'net', 'nor', 'nand' or 'initrd'
>> -rootfs_loc=net
>> +rootfs_loc=nand
>> # can be either 'nfs', 'tftp', 'nand' or empty
>> -oftree_loc=nfs
>> +oftree_loc=nand
>>
>> # can be either 'jffs2' or 'ubifs'
>> rootfs_type=ubifs
>> rootfsimage=root.$rootfs_type
>> -ubiroot=rootfs
>> +ubiroot=system
>>
>> # The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
>> kernelimage=zImage
>> @@ -29,14 +29,14 @@ kernelimage=zImage
>> #kernelimage=Image.lzo
>>
>> nand_device=atmel_nand
>>
>> -nand_parts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),-(rootfs)"
>> -rootfs_mtdblock_nand=7
>>
>> +nand_parts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),8M(recovery),176M(system),304M(userdata),-(cache)"
>> +rootfs_mtdblock_nand=10
>>
>>
>> m25p80_parts="64k(bootstrap),384k(barebox),256k(bareboxenv),256k(bareboxenv2),128k(oftree),-(updater)"
>>
>> autoboot_timeout=3
>>
>> -bootargs="console=ttyS0,115200"
>> +bootargs="console=ttyS0,115200 ubi.mtd=8 ubi.mtd=9 init=/init
>> androidboot.hardware=sama5-pda androidboot.lcd=wvga"
>>
>> # set a fancy prompt (if support is compiled in)
>> PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m\n# "
>>
>
> Best Regards,
> Bo Shen
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2015-02-11 4:03 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-10 14:28 Doug Brainard
2015-02-10 14:28 ` [PATCH 2/2] Switched SAMA5D4EK development board to the newer environment method Doug Brainard
2015-02-11 2:34 ` Bo Shen
2015-02-11 4:00 ` Doug Brainard
2015-02-11 5:06 ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-11 7:26 ` Bo Shen
2015-02-11 8:35 ` Sascha Hauer
2015-02-11 8:54 ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-11 9:12 ` Eric Bénard
2015-02-11 9:19 ` Sascha Hauer
2015-02-11 12:03 ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-11 14:33 ` Sascha Hauer
2015-02-11 8:43 ` Sascha Hauer
2015-02-11 16:53 ` Doug Brainard
2015-02-11 16:38 ` Doug Brainard
2015-02-11 17:39 ` Doug Brainard
2015-02-12 9:13 ` Sascha Hauer
2015-02-13 2:57 ` Doug Brainard
2015-02-13 5:32 ` Doug Brainard
2015-02-11 1:30 ` [PATCH 1/2] SAMA5D4EK - Now mostly supports booting Android from NAND Bo Shen
2015-02-11 4:02 ` Doug Brainard [this message]
2015-02-11 7:23 ` Bo Shen
2015-02-11 5:04 ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-11 7:42 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CA+nEJinrt4TiRhESHZOepq-qyTq+Tj+wuMJfSv0Lxfjv2erEvA@mail.gmail.com \
--to=dbrainard@brainardinsight.com \
--cc=barebox@lists.infradead.org \
--cc=voice.shen@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox