mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Mylene Josserand" <Mylene.Josserand@navocap.com>
To: barebox mailist <barebox@lists.infradead.org>
Subject: [help] PHY driver : Unable to find a PHY (unknown ID?)
Date: Fri, 4 Jan 2013 10:09:05 +0100	[thread overview]
Message-ID: <CA78C307B8F06747967D122FC656B15377433D@SERVEUR0.nvp.local> (raw)

Hi everyone !


I am new in compiling Barebox (with OE-core) and I need your help.

I am using the master branch (maybe I need to checkout a tag ?). The 
ethernet of my board is a SMSC LAN8700 and the microchip is iMX27.

I have configured the new source of barebox to use the Phylib and MII 
drivers. When my barebox starts, I have an error about the PHY driver :

"
Unable to find a PHY (unknown ID?)
dhcp failed: I/O error
dhcp: I/O error
"

My devinfo :

"
barebox:/ devinfo
devices:
`---- platform
    `---- imx_iim0
    `---- imx27-ccm0
    `---- imx1-gpt0
    `---- imx1-gpio0
    `---- imx1-gpio1
    `---- imx1-gpio2
    `---- imx1-gpio3
    `---- imx1-gpio4
    `---- imx1-gpio5
    `---- imx21-wdt0
    `---- imx27-esdctl0
    `---- imx21-uart0
       `---- cs0
    `---- mem0
       `---- 0x00000000-0x07ffffff: /dev/ram0
    `---- mem1
       `---- 0x00000000-0xfffffffe: /dev/mem
    `---- cfi_flash0
       `---- 0x00000000-0x01ffffff: /dev/nor0
       `---- 0x00000000-0x0003ffff: /dev/self0
       `---- 0x00040000-0x0005ffff: /dev/env0
       `---- 0x00000000-0x0003ffff: /dev/nor0.barebox
       `---- 0x00040000-0x0005ffff: /dev/nor0.bareboxenv
       `---- 0x00060000-0x002bffff: /dev/nor0.kernel
       `---- 0x002c0000-0x01ffffff: /dev/nor0.root
    `---- cfi_flash1
       `---- 0x00000000-0x01ffffff: /dev/nor1
    `---- imx_nand
       `---- nand0
       `---- 0x00000000-0x1fffffff: /dev/nand0
       `---- 0x00000000-0x00ffffff: /dev/nand_oob0
    `---- i2c-fsl0
       `---- i2c0
          `---- lp39720
             `---- 0x00000000-0x000000ff: /dev/lp3972
          `---- ds133x0
             `---- 0x00000000-0x000000ff: /dev/ds133x
          `---- pca95350
             `---- 0x00000000-0x000000ff: /dev/pca9535
    `---- i2c-fsl1
       `---- i2c1
    `---- imxfb
    `---- imx27-fec
       `---- miibus0
       `---- eth0
`---- mdio_bus
`---- i2c
`---- fb
    `---- fb0
       `---- 0x00000000-0x000bb7ff: /dev/fb0
`---- fs
    `---- ramfs0
    `---- devfs0
`---- net
`---- global

drivers:
imx27-ccm
imx_serial
imx-esdctl
ramfs
devfs
tftp
imx-gpt
imx-gpio
SMSC LAN83C185
SMSC LAN8187
SMSC LAN8700
SMSC LAN911x Internal PHY
SMSC LAN8710/LAN8720
fec_imx
Generic PHY
imx_nand
cfi_flash
i2c-gpio
i2c-fsl
fb
imxfb
lp3972
ds133x
pca9535
imx-watchdog
mem
"

The SMSC LAN8700 is here but I can not make it work !

I have added some prints on the phy.c and the problem is in the fonction 
"mdiobus_scan" :

if (!edev->phydev) {
	if (addr >= 0) {
		dev = mdiobus_scan(bus, addr);
		if (!dev) {                     << Failed here
			ret = -EIO;
			goto fail;
		}

Did I miss something ?
Did I have to specify something in the board info ?
Is it correct to use the master branch ? I tried the v2012.12.1 tag but 
I get some errors before starting barebox ("no stack data available" and 
other errors).


Thank you in advance for any help and happy new year !


-- 
Mylène JOSSERAND

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2013-01-04  9:10 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-04  9:09 Mylene Josserand [this message]
2013-01-04 10:18 ` Thomas Petazzoni
2013-01-04 11:03   ` Mylene Josserand
2013-01-04 11:23     ` Thomas Petazzoni
2013-01-04 12:46       ` Mylene Josserand
2013-01-04 13:28         ` Eric Bénard
2013-01-07 13:56           ` Mylene Josserand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CA78C307B8F06747967D122FC656B15377433D@SERVEUR0.nvp.local \
    --to=mylene.josserand@navocap.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox