mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: Lucas Stach <dev@lynxeye.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 2/5] tegra: switch to ARMv7 cpu type
Date: Fri, 8 Mar 2013 10:03:19 +0400	[thread overview]
Message-ID: <CAA4bVAEbWYWVstete_AYB_3oKRu5Rv6eAc_+91j8xwNtGNfkrQ@mail.gmail.com> (raw)
In-Reply-To: <1362652402-2985-3-git-send-email-dev@lynxeye.de>

Hi!

This commit breaks usb ethernet card on my board.

toshiba ac100> / usb
USB: scanning bus for devices...
Bus 001 Device 003: ID 0bdb:190a F3307
Bus 001 Device 004: ID 0bda:58f2 USB Camera
Bus 001 Device 005: ID 2001:3c05 DUB-E100
mdio_bus: miibus0: probed
eth0: got preset MAC address: 1C:7E:E5:0F:E1:14
Bus 001 Device 002: ID 0424:2513
Bus 001 Device 001: ID 0000:0000 EHCI Host Controller
5 USB Device(s) found
toshiba ac100> / dhcp
100Mbps full duplex link detected
dhcp failed: error 1
dhcp: error 1
toshiba ac100>

The next branch with Sascha's 'usb: ehci: initialize ehci_data' patch
works fine.

On 7 March 2013 14:33, Lucas Stach <dev@lynxeye.de> wrote:
> Main barebox is running on the A9 cluster. Use the correct ISA.
>
> Signed-off-by: Lucas Stach <dev@lynxeye.de>
> ---
>  arch/arm/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 7ac134e..5dbf74d 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -125,7 +125,7 @@ config ARCH_VEXPRESS
>
>  config ARCH_TEGRA
>         bool "Nvidia Tegra-based boards"
> -       select CPU_ARM926T
> +       select CPU_V7
>         select HAS_DEBUG_LL
>
>  endchoice
> --
> 1.8.1.2
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox



-- 
Best regards,
  Antony Pavlov

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2013-03-08  6:03 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-01  9:22 [PATCH 0/7] Rework current Tegra support Lucas Stach
2013-03-01  9:22 ` [PATCH 1/7] tegra: move address map to tegra20-silicon.h Lucas Stach
2013-03-01 13:17   ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-02 23:25     ` Lucas Stach
2013-03-04 19:26       ` Antony Pavlov
2013-03-01  9:22 ` [PATCH 2/7] tegra: remove debug_ll Lucas Stach
2013-03-01 13:17   ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-01 17:19   ` Sascha Hauer
2013-03-01  9:22 ` [PATCH 3/7] tegra: switch to ARMv7 cpu type Lucas Stach
2013-03-01  9:22 ` [PATCH 4/7] tegra: add blank tegra20 platform init Lucas Stach
2013-03-01 13:16   ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-01  9:22 ` [PATCH 5/7] tegra: add driver for the clock and reset module Lucas Stach
2013-03-01 17:26   ` Sascha Hauer
2013-03-02 23:16     ` Lucas Stach
2013-03-01  9:22 ` [PATCH 6/7] tegra: add proper timer driver Lucas Stach
2013-03-01 13:14   ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-01 17:23   ` Sascha Hauer
2013-03-02 23:13     ` Lucas Stach
2013-03-03  7:07       ` Antony Pavlov
2013-03-04 17:09         ` Lucas Stach
2013-03-04 19:14           ` Antony Pavlov
2013-03-01  9:22 ` [PATCH 7/7] tegra: add power management controller driver Lucas Stach
2013-03-01 13:15   ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-01 17:28     ` Sascha Hauer
2013-03-01 18:00       ` Antony Pavlov
2013-03-02 23:21         ` Lucas Stach
2013-03-07 10:33 ` [PATCH v2 0/5] Rework current Tegra support Lucas Stach
2013-03-07 10:33   ` [PATCH v2 1/5] tegra: pull in iomap.h from the Linux kernel Lucas Stach
2013-03-07 10:33   ` [PATCH v2 2/5] tegra: switch to ARMv7 cpu type Lucas Stach
2013-03-08  6:03     ` Antony Pavlov [this message]
2013-03-08 13:17       ` Lucas Stach
2013-03-08 16:56         ` Antony Pavlov
2013-03-08 14:32       ` Sascha Hauer
2013-03-08 17:15         ` Antony Pavlov
2013-03-07 10:33   ` [PATCH v2 3/5] tegra: add driver for the clock and reset module Lucas Stach
2013-03-10  7:41     ` Antony Pavlov
2013-03-10  9:53       ` Sascha Hauer
2013-03-07 10:33   ` [PATCH v2 4/5] tegra: add proper timer driver Lucas Stach
2013-03-10  7:12     ` Antony Pavlov
2013-03-07 10:33   ` [PATCH v2 5/5] tegra: add power management controller driver Lucas Stach
2013-03-10  8:19     ` Antony Pavlov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAA4bVAEbWYWVstete_AYB_3oKRu5Rv6eAc_+91j8xwNtGNfkrQ@mail.gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=dev@lynxeye.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox