Hi,

you can create NAND Partitons with nand_parts variable in /env/config.

For example nand_parts="256k(barebox)ro,128k(bareboxenv),3M(kernel),-(root)"

nand -a nand0.* only creates a bb device that will handle badblocks if they appear.

Cheers
Alex

Am 29. März 2012 13:55 schrieb <christian.buettner@rafi.de>:
Hi,

i need to create a NAND Partition through the barebox prompt to be able to flash a kernel image on it.

This is the current devinfo of my target:

barebox:/ devinfo
devices:
`---- imx_serial0
     `---- cs0
`---- mem0
     `---- 0x00000000-0x1fffffff: /dev/ram0
`---- mem1
     `---- 0x00000000-0x1fffffff: /dev/ram1
`---- imx_iim0
     `---- 0x00000000-0x0000001f: /dev/imx_iim_bank0
     `---- 0x00000000-0x0000001f: /dev/imx_iim_bank1
     `---- 0x00000000-0x0000001f: /dev/imx_iim_bank2
     `---- 0x00000000-0x0000001f: /dev/imx_iim_bank3
     `---- 0x00000000-0x0000001f: /dev/imx_iim_bank4
     `---- 0x00000000-0x0000001f: /dev/imx_iim_bank5
     `---- 0x00000000-0x0000001f: /dev/imx_iim_bank6
     `---- 0x00000000-0x0000001f: /dev/imx_iim_bank7
`---- ramfs0
`---- devfs0
`---- mem2
     `---- 0x00000000-0x000018ab: /dev/defaultenv
`---- mem3
     `---- 0x00000000-0xfffffffe: /dev/mem
`---- cs1
`---- fec_imx0
     `---- miidev0
          `---- 0x00000000-0x0000003f: /dev/phy0
     `---- eth0

drivers:
imx_serial
     ramfs
     devfs
   imx_iim
   fec_imx
    miidev
       mem


I tried using
$ nand -a /dev/nand0.*

Nothing happens..
What is wrong?

- - Christian
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox