From: Javier Fileiv <javier.fileiv@gmail.com>
To: Juergen Borleis <jbe@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: Loading kernel issues
Date: Wed, 19 Oct 2016 20:17:39 +0200 [thread overview]
Message-ID: <CABvwO2BoCQs-XoSNsYG8Uo8+odKcZ6o5dWoFzk_nQjTJGerYLw@mail.gmail.com> (raw)
In-Reply-To: <201610190953.41081.jbe@pengutronix.de>
Hello Juergen,
Here is my power up output, thanks you very much
Terminal ready
barebox 2011.05.0-ptx-2014.11.0 (Oct 13 2016 - 21:53:08)
Board: Mini 2440
NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit)
Bad block table found at page 524224, version 0x01
Bad block table found at page 524160, version 0x01
nand_read_bbt: Bad block at 0x255a0000
dm9000 i/o: 0x20000300, id: 0x90000a46
eth@eth0: got MAC address from EEPROM: 00:00:00:00:00:00
cfi_probe: cfi_flash base: 0x00000000 size: 0x00200000
## Unknown FLASH on Bank at 0x00000000 - Size = 0x00000000 = 0 MB
refclk: 12000 kHz
mpll: 405000 kHz
upll: 48000 kHz
fclk: 405000 kHz
hclk: 101250 kHz
pclk: 50625 kHz
SDRAM1: CL2@101MHz
Malloc space: 0x33a00000 -> 0x33e00000 (size 4 MB)
Stack space : 0x339f8000 -> 0x33a00000 (size 32 kB)
running /env/bin/init...
2016-10-19 9:53 GMT+02:00 Juergen Borleis <jbe@pengutronix.de>:
> Hi Javier,
>
> On Tuesday 18 October 2016 18:56:03 Javier Fileiv wrote:
>> Trying to autoboot from nand, I set my /env/config file like that (and
>> after that a "saveenv"). Although it doesn't work automaGically! :)
>
> Can you also send the output of barebox from power on up to the point it falls
> into the prompt?
>
> Cheers,
> Juergen
>
> --
> Pengutronix e.K. | Juergen Borleis |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-10-19 18:18 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CABvwO2ARpHSzYE6Y3JrfFAQ2jEzw3EXfP36goL6kPogcBbNLKQ@mail.gmail.com>
2016-10-18 5:37 ` Sascha Hauer
2016-10-18 8:17 ` Juergen Borleis
2016-10-18 8:24 ` Javier Fileiv
2016-10-18 16:56 ` Javier Fileiv
2016-10-19 7:53 ` Juergen Borleis
2016-10-19 18:17 ` Javier Fileiv [this message]
2016-10-19 18:18 ` Javier Fileiv
2016-10-20 9:13 ` Juergen Borleis
2016-10-20 9:17 ` Javier Fileiv
2016-10-20 17:59 ` Javier Fileiv
2016-10-21 7:39 ` Juergen Borleis
2016-10-21 7:41 ` Javier Fileiv
2016-10-21 7:53 ` Juergen Borleis
2016-10-21 7:54 ` Javier Fileiv
2016-10-21 8:02 ` gianluca
2016-10-21 8:05 ` Juergen Borleis
2016-10-21 8:07 ` Sascha Hauer
2016-10-21 8:11 ` Javier Fileiv
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CABvwO2BoCQs-XoSNsYG8Uo8+odKcZ6o5dWoFzk_nQjTJGerYLw@mail.gmail.com \
--to=javier.fileiv@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=jbe@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox