barebox-2013.07.0 / barebox-2013.08.0 splash, bmp, png problems on Mini2440

barebox-2013.07.0 / barebox-2013.08.0 splash, bmp, png problems on Mini2440

[Pawel Suchanecki]

Hello dear list,

I have barebox 2013.07/08.0 up and running, however I can not make it
display the splash on my Mini2440.

I have it built with:

 --- Video drivers
 -*-   S3C244x framebuffer driver
 [*]   S3C244x verbose framebuffer info

& "Library gui routines"

 [*] bmp
 [*] png
          PNG Lib (lodePNG)  --->

but when I run:

mini2440:/ splash -f /dev/fb0 /mnt/F.bmp
mini2440:/ echo $?
1

Splash command reads the file from mounted USB storage (pendrive),
which takes a while but exits with error.

Also bmp & png commands are not available.

I found the "fb0.enable=1" turning on the LCD but there is some
garbage, which changes when I try to load different files.

I try to load .bmp-s generated by GIMP in 24 bit mode (with and
without saving the information on color space).

It does not load barebox.png from logo/png{8,24}/200x200/color
directory of barebox-2013.08.0 distro either.

What am I doing wrong?

Thank you,
Pawel

p.s. please CC me as I am not on the list atm.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [SPAM] barebox-2013.07.0 / barebox-2013.08.0 splash, bmp, png problems on Mini2440

[Jean-Christophe PLAGNIOL-VILLARD]

On 22:02 Tue 06 Aug     , Pawel Suchanecki wrote:
> Hello dear list,
> 
> I have barebox 2013.07/08.0 up and running, however I can not make it
> display the splash on my Mini2440.
> 
> I have it built with:
> 
>  --- Video drivers
>  -*-   S3C244x framebuffer driver
>  [*]   S3C244x verbose framebuffer info
> 
> & "Library gui routines"
> 
>  [*] bmp
>  [*] png
>           PNG Lib (lodePNG)  --->
> 
> but when I run:
> 
> mini2440:/ splash -f /dev/fb0 /mnt/F.bmp
> mini2440:/ echo $?
> 1
> 
> Splash command reads the file from mounted USB storage (pendrive),
> which takes a while but exits with error.
> 
> Also bmp & png commands are not available.

because the image renderer detect it automaticaly so you do need to care which
format the splash command use
> 
> I found the "fb0.enable=1" turning on the LCD but there is some
> garbage, which changes when I try to load different files.
> 
> I try to load .bmp-s generated by GIMP in 24 bit mode (with and
> without saving the information on color space).
> 
> It does not load barebox.png from logo/png{8,24}/200x200/color
> directory of barebox-2013.08.0 distro either.
> 
> What am I doing wrong?
> 

are you sure your lcd is connecte correctly?

I try the png support work fine sandbox & atmel at91 boards

Best Regards,
J.
> Thank you,
> Pawel
> 
> p.s. please CC me as I am not on the list atm.
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [SPAM] barebox-2013.07.0 / barebox-2013.08.0 splash, bmp, png problems on Mini2440

[Pawel Suchanecki]

2013/8/8 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>:
>> Also bmp & png commands are not available.
>
> because the image renderer detect it automaticaly so you do need to care which
> format the splash command use

You're right, I noticed that later.

>> What am I doing wrong?
>>
> are you sure your lcd is connecte correctly?
>
> I try the png support work fine sandbox & atmel at91 boards

Jean-Christophe,

Thanks for your help.
The problem was I didn't choose the right LCD type when doing menuconfig.

Now it works,

Thanks again,
Pawel.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox