Hello, Thanks for your link. I have tried and got to the step shown in the attachment. Looked here: https://www.barebox.org/doc/latest/user/usb.html#usb-gadget-autostart-support did not understand how to create and execute a script from the host. For me the imx6ul board must be in peripheral mode. I wish to flash the barebox from a windows/Linux workstation, not using usb stick. barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ otg.mode=peripheral barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ usbgadget -A /kernel(kernel)c,/initrd(initrd)c,/devicetree(devicetree)c udc0: registering UDC driver [g_multi] multi_bind: creating Fastboot function g_multi usbgadget: Multifunction Composite Gadget g_multi usbgadget: userspace failed to provide iSerialNumber g_multi usbgadget: g_multi ready barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ fastboot devices -l fastboot: No such file or directory barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ thanks, Mihaita On Tue, Oct 15, 2019 at 4:17 PM Ahmad Fatoum wrote: > > Hello, > > On 10/15/19 4:07 PM, Mihaita Ivascu wrote: > > Hello, > > > > does anyone have experience with using imx_usb_loader to flash the > > barebox on a NAND(mtd partition)? If yes some reference scripts would > > be helpful for me. Or where should I look for an example? > > Check out this thread: > https://www.spinics.net/lists/u-boot-v2/msg37199.html > > TL;DR: imx_usb_loader to get barebox into SDRAM, then Android Fastboot for flashing > > > > > Thanks, > > Mihaita Ivascu > > > > > > > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox