mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Mihaita Ivascu <mihaita_ivascu@trimble.com>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: MFGTools from NXP
Date: Mon, 21 Oct 2019 14:39:03 +0200	[thread overview]
Message-ID: <CAEp+FuDAtQGyFT88Tjx8DZHb-VHGXuHZGY-+r5GQrDG4N=WMtw@mail.gmail.com> (raw)
In-Reply-To: <184f36c0-3915-c398-b095-930d213f19a0@pengutronix.de>

Hello,

   Thanks for your reply. Yes ttyACM is ok now for Linux i can connect
to it. But fastboot still does not detect the board.

Thanks,
       Mihaita

On Fri, Oct 18, 2019 at 2:46 PM Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
>
> Hello,
>
> On 10/17/19 10:40 AM, Mihaita Ivascu wrote:
> > Yes I have tried with 2019.01.0 barebox but no change. On linux I
> > cannot even connect with PUTTY even though /dev/ttyACM0 is present. On
> > Windows at least I can connect via PUTTY
>
> There's A Linux PuTTY client? Have you tried with a more traditional client,
> e.g. screen or microcom?
>
> > On both OSes fastboot does not list any device. But the board is
> > detected in device manager/dmesg.
>
> :/
> I don't know why it doesn't work for you. I've used so far at least barebox
> v2018.12.0, v2019.03.0 and v2019.09.0 on my i.MX6UL board and all were correctly
> detected by the fastboot installed on my system (1:7.0.+r33-1 in debian 9.11).
>
> If you want to debug it, you should start by looking into why the ttyACM
> doesn't work for you.
>
> Cheers
> Ahmad
>
>
> >
> > Best regards,
> >          Mihaita Ivascu
> >
> > On Wed, Oct 16, 2019 at 2:46 PM Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
> >>
> >> On 10/16/19 2:44 PM, Mihaita Ivascu wrote:
> >>> 2018.04.0
> >>
> >> I've v2019.09.0 and did the same steps you described and it works for me.
> >> Can you try with a newer version?
> >>
> >>>
> >>> On Wed, Oct 16, 2019 at 2:41 PM Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
> >>>>
> >>>> On 10/16/19 2:35 PM, Mihaita Ivascu wrote:
> >>>>> No it does not. Still no devices listed.
> >>>>
> >>>> Strange. What barebox version?
> >>>>
> >>>>>
> >>>>> Thanks,
> >>>>>       Mihaita
> >>>>>
> >>>>> On Wed, Oct 16, 2019 at 1:36 PM Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
> >>>>>>
> >>>>>> On 10/16/19 1:28 PM, Mihaita Ivascu wrote:
> >>>>>>> On Wed, Oct 16, 2019 at 11:53 AM Ahmad Fatoum <a.fatoum@pengutronix.de>
> >>>>>>> wrote:
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> On 10/16/19 11:48 AM, Mihaita Ivascu wrote:
> >>>>>>>>> On Wed, Oct 16, 2019 at 11:26 AM Ahmad Fatoum <a.fatoum@pengutronix.de>
> >>>>>>> wrote:
> >>>>>>>>>>
> >>>>>>>>>> On 10/16/19 11:21 AM, Mihaita Ivascu wrote:
> >>>>>>>>>>> Hello,
> >>>>>>>>>>>
> >>>>>>>>>>>    Thanks for your answer. Yes i am able to connect via PUTTY to the
> >>>>>>> target.
> >>>>>>>>>>>    Then I should use some adb commands in order to push the new
> >>>>>>>>>>> barebox/firmware ? do you know where I could find some examples?
> >>>>>>>>>>
> >>>>>>>>>> fastboot device -l works normally on Linux. You need to check what you
> >>>>>>> need
> >>>>>>>>>> to do on Windows to do the same. You should only need the Fastboot
> >>>>>>> utility
> >>>>>>>>>> for this.
> >>>>>>>>>>
> >>>>>>>>> [mi] Yes I have both fastboot and adb installed on both Windows and
> >>>>>>>>> Linux machines. In both cases it does not list any device.
> >>>>>>>>>        The board is detected as fastboot android is windows device
> >>>>>>>>> manager. But the fastboot and adb does not list it. same for Linux.
> >>>>>>>>> Please see attachment
> >>>>>>>>
> >>>>>>>> Let's focus on Linux. You don't see a device there?
> >>>>>>>> What does barebox say? Does it say 'multi_bind: creating Fastboot
> >>>>>>> function'?
> >>>>>>>> What does you Linux host's dmesg say?
> >>>>>>>>
> >>>>>>>
> >>>>>>> barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ usbgadget -aA
> >>>>>>> udc0: registering UDC driver [g_multi]
> >>>>>>> multi_bind: creating Fastboot function
> >>>>>>> multi_bind: creating ACM function
> >>>>>>> g_multi usbgadget: Multifunction Composite Gadget
> >>>>>>> g_multi usbgadget: userspace failed to provide iSerialNumber
> >>>>>>> g_multi usbgadget: g_multi ready
> >>>>>>> barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ g_multi usbgadget: high-speed
> >>>>>>> config #1: Multifunction Composite Gadget
> >>>>>>>
> >>>>>>> dmesg:
> >>>>>>>
> >>>>>>> [   25.602275] usb 1-1.3: USB disconnect, device number 3
> >>>>>>> [   28.359930] usb 1-1.3: new high-speed USB device number 5 using ehci-pci
> >>>>>>> [   28.452971] usb 1-1.3: New USB device found, idVendor=1d6b,
> >>>>>>> idProduct=0104
> >>>>>>> [   28.452976] usb 1-1.3: New USB device strings: Mfr=0, Product=2,
> >>>>>>> SerialNumber=0
> >>>>>>> [   28.452980] usb 1-1.3: Product: Phytec phyCORE-i.MX6 Ultra Lite SOM
> >>>>>>> [   28.457925] cdc_acm 1-1.3:1.1: ttyACM0: USB ACM device
> >>>>>>>
> >>>>>>>
> >>>>>>> So I see the device on Linux. But fastboot does not list any device on
> >>>>>>> Linux.
> >>>>>>
> >>>>>> sudo doesn't change this?
> >>>>>>
> >>>>>>>
> >>>>>>>>  >
> >>>>>>>>>>>
> >>>>>>>>>>>    Also I have a question: purpose of this activity is for me to be
> >>>>>>>>>>> able to flash some imx6ul boards that have no firmware: no barebox.
> >>>>>>>>>>>    So I know hardware config for the port is otg mode but as I have no
> >>>>>>>>>>> barebox running them before I am wondering if I will be able to
> >>>>>>>>>>> connect via PUTTY if I do not set the ACM gadget from barebox?
> >>>>>>>>>>
> >>>>>>>>>> Check the Embest MarS board's environment in barebox master. It sets up
> >>>>>>>>>> a fastboot gadget automatically on boot from imx-usb-loader.
> >>>>>>>>>> You can adjust it to your liking.
> >>>>>>>>>
> >>>>>>>>>   [mi] I was not able to find any docs about this board. I will keep
> >>>>>>>>> searching/asking in the nxp community. If you have already ahve any
> >>>>>>>>> files related to it would be helpful. Thanks
> >>>>>>>>
> >>>>>>>> It's in the barebox next branch (not master, sorry), see here:
> >>>>>>>>
> >>>>>>> https://github.com/saschahauer/barebox/blob/next/arch/arm/boards/embest-marsboard/defaultenv-mars/init/fastboot
> >>>>>>>>
> >>>>>>>> You can copy and adjust the environment setup for your board.
> >>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> Cheers
> >>>>>>>>>> Ahmad
> >>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Thanks,
> >>>>>>>>>>>       Mihaita
> >>>>>>>>>>>
> >>>>>>>>>>> On Wed, Oct 16, 2019 at 10:51 AM Ahmad Fatoum <a.fatoum@pengutronix.de>
> >>>>>>> wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>> On 10/16/19 10:40 AM, Mihaita Ivascu wrote:
> >>>>>>>>>>>>> Hello again,
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>    I have the target in otg peripheral mode, ADB and fastboot
> >>>>>>> drivers
> >>>>>>>>>>>>> installed but fastboot does not list any device. The board is
> >>>>>>> detected
> >>>>>>>>>>>>> in device manager
> >>>>>>>>>>>>
> >>>>>>>>>>>> Try enabling the ACM gadget in barebox and connect with PuTTY and
> >>>>>>> see if
> >>>>>>>>>>>> at least that works. It worked for me on Windows with another i.MX
> >>>>>>> board
> >>>>>>>>>>>> a month ago.
> >>>>>>>>>>>>
> >>>>>>>>>>>> As for fastboot, I don't know how to configure it on Windows, but
> >>>>>>> surely
> >>>>>>>>>>>> Android Modding boards will have you covered there.
> >>>>>>>>>>>>
> >>>>>>>>>>>>>    Please see attachment. Any ideas how should I proceed? Thanks for
> >>>>>>>>>>>>> the support.
> >>>>>>>>>>>>
> >>>>>>>>>>>> You can enable the ACM gadget in barebox and see if that works, I
> >>>>>>> tested
> >>>>>>>>>>>> it on Windows with an i.MX board a month ago
> >>>>>>>>>>>>
> >>>>>>>>>>>> Cheers
> >>>>>>>>>>>> Ahmad
> >>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Thanks,
> >>>>>>>>>>>>>       Mihaita
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> On Wed, Oct 16, 2019 at 9:32 AM Mihaita Ivascu
> >>>>>>>>>>>>> <mihaita_ivascu@trimble.com> wrote:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Thanks. I have installed ADB and fastboot drivers for Win from
> >>>>>>>>>>>>>>
> >>>>>>> https://www.getdroidtips.com/how-to-install-adb-and-fastboot-on-windows/
> >>>>>>>>>>>>>> I have installed according to the attachment.
> >>>>>>>>>>>>>> But is not recognized in Windows. I did reboot the system after
> >>>>>>>>>>>>>> installation but did not add any new env variable.
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> H:\>fastboot devices -l
> >>>>>>>>>>>>>> 'fastboot' is not recognized as an internal or external command,
> >>>>>>>>>>>>>> operable program or batch file.
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Thanks,
> >>>>>>>>>>>>>>       Mihaita
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> On Tue, Oct 15, 2019 at 4:44 PM Ahmad Fatoum <
> >>>>>>> a.fatoum@pengutronix.de> wrote:
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> On 10/15/19 4:41 PM, Mihaita Ivascu wrote:
> >>>>>>>>>>>>>>>> barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ fastboot devices -l
> >>>>>>>>>>>>>>> That's what you run on your host system, not on the target.
> >>>>>>>>>>>>>>> --
> >>>>>>>>>>>>>>> Pengutronix e.K.                           |
> >>>>>>>         |
> >>>>>>>>>>>>>>> Industrial Linux Solutions                 |
> >>>>>>> http://www.pengutronix.de/  |
> >>>>>>>>>>>>>>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone:
> >>>>>>> +49-5121-206917-0    |
> >>>>>>>>>>>>>>> Amtsgericht Hildesheim, HRA 2686           | Fax:
> >>>>>>> +49-5121-206917-5555 |
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> --
> >>>>>>>>>>>> Pengutronix e.K.                           |
> >>>>>>>     |
> >>>>>>>>>>>> Industrial Linux Solutions                 |
> >>>>>>> http://www.pengutronix.de/  |
> >>>>>>>>>>>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone:
> >>>>>>> +49-5121-206917-0    |
> >>>>>>>>>>>> Amtsgericht Hildesheim, HRA 2686           | Fax:
> >>>>>>> +49-5121-206917-5555 |
> >>>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> --
> >>>>>>>>>> Pengutronix e.K.                           |
> >>>>>>>   |
> >>>>>>>>>> Industrial Linux Solutions                 | http://www.pengutronix.de/
> >>>>>>>  |
> >>>>>>>>>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0
> >>>>>>>    |
> >>>>>>>>>> Amtsgericht Hildesheim, HRA 2686           | Fax:
> >>>>>>> +49-5121-206917-5555 |
> >>>>>>>>
> >>>>>>>> --
> >>>>>>>> Pengutronix e.K.                           |                             |
> >>>>>>>> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> >>>>>>>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> >>>>>>>> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> >>>>>>>
> >>>>>>
> >>>>>> --
> >>>>>> Pengutronix e.K.                           |                             |
> >>>>>> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> >>>>>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> >>>>>> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> >>>>>
> >>>>
> >>>>
> >>>> --
> >>>> Pengutronix e.K.                           |                             |
> >>>> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> >>>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> >>>> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> >>>
> >>
> >>
> >> --
> >> Pengutronix e.K.                           |                             |
> >> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> >> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> >> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> >
>
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2019-10-21 12:39 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-10 13:03 Mihaita Ivascu
2019-10-11  7:21 ` Marco Felsch
2019-10-11  9:47   ` Mihaita Ivascu
2019-10-14 13:07     ` Mihaita Ivascu
2019-10-15 14:07       ` Mihaita Ivascu
2019-10-15 14:17         ` Ahmad Fatoum
2019-10-15 14:41           ` Mihaita Ivascu
2019-10-15 14:44             ` Ahmad Fatoum
2019-10-16  7:32               ` Mihaita Ivascu
2019-10-16  8:40                 ` Mihaita Ivascu
2019-10-16  8:51                   ` Ahmad Fatoum
2019-10-16  9:21                     ` Mihaita Ivascu
2019-10-16  9:26                       ` Ahmad Fatoum
2019-10-16  9:48                         ` Mihaita Ivascu
2019-10-16  9:53                           ` Ahmad Fatoum
2019-10-16 11:32                             ` Mihaita Ivascu
     [not found]                             ` <CAEp+FuDPDra+umeaLYuLUdjuzHiV+_eB+s2pMmwij8Scp6Gd=w@mail.gmail.com>
2019-10-16 11:36                               ` Ahmad Fatoum
2019-10-16 12:35                                 ` Mihaita Ivascu
2019-10-16 12:41                                   ` Ahmad Fatoum
2019-10-16 12:44                                     ` Mihaita Ivascu
2019-10-16 12:45                                       ` Ahmad Fatoum
2019-10-17  8:40                                         ` Mihaita Ivascu
2019-10-18 12:46                                           ` Ahmad Fatoum
2019-10-21 12:39                                             ` Mihaita Ivascu [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAEp+FuDAtQGyFT88Tjx8DZHb-VHGXuHZGY-+r5GQrDG4N=WMtw@mail.gmail.com' \
    --to=mihaita_ivascu@trimble.com \
    --cc=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox