From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-qk0-x244.google.com ([2607:f8b0:400d:c09::244]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1aHVgi-0004TZ-Eh for barebox@lists.infradead.org; Fri, 08 Jan 2016 11:58:47 +0000 Received: by mail-qk0-x244.google.com with SMTP id p186so17257357qke.2 for ; Fri, 08 Jan 2016 03:58:14 -0800 (PST) MIME-Version: 1.0 In-Reply-To: <1452251635-14689-5-git-send-email-s.hauer@pengutronix.de> References: <1452251635-14689-1-git-send-email-s.hauer@pengutronix.de> <1452251635-14689-5-git-send-email-s.hauer@pengutronix.de> From: Yegor Yefremov Date: Fri, 8 Jan 2016 12:57:54 +0100 Message-ID: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 4/8] include pyserial trunk To: Sascha Hauer Cc: Barebox List On Fri, Jan 8, 2016 at 12:13 PM, Sascha Hauer wrote: > From: Jan Luebbe > > The current pyserial is broken, this version contains the fix for: > http://sourceforge.net/p/pyserial/bugs/166/ Have you tried the newest version from https://github.com/pyserial/pyserial/releases Yegor > Signed-off-by: Jan Luebbe > --- > .gitignore | 1 + > scripts/serial/__init__.py | 79 ++ > scripts/serial/rfc2217.py | 1327 +++++++++++++++++++++++++ > scripts/serial/serialcli.py | 284 ++++++ > scripts/serial/serialposix.py | 730 ++++++++++++++ > scripts/serial/serialutil.py | 572 +++++++++++ > scripts/serial/tools/__init__.py | 0 > scripts/serial/tools/list_ports.py | 103 ++ > scripts/serial/tools/list_ports_linux.py | 152 +++ > scripts/serial/urlhandler/__init__.py | 0 > scripts/serial/urlhandler/protocol_hwgrep.py | 45 + > scripts/serial/urlhandler/protocol_loop.py | 279 ++++++ > scripts/serial/urlhandler/protocol_rfc2217.py | 11 + > scripts/serial/urlhandler/protocol_socket.py | 291 ++++++ > 14 files changed, 3874 insertions(+) > create mode 100644 scripts/serial/__init__.py > create mode 100644 scripts/serial/rfc2217.py > create mode 100644 scripts/serial/serialcli.py > create mode 100644 scripts/serial/serialposix.py > create mode 100644 scripts/serial/serialutil.py > create mode 100644 scripts/serial/tools/__init__.py > create mode 100644 scripts/serial/tools/list_ports.py > create mode 100644 scripts/serial/tools/list_ports_linux.py > create mode 100644 scripts/serial/urlhandler/__init__.py > create mode 100644 scripts/serial/urlhandler/protocol_hwgrep.py > create mode 100644 scripts/serial/urlhandler/protocol_loop.py > create mode 100644 scripts/serial/urlhandler/protocol_rfc2217.py > create mode 100644 scripts/serial/urlhandler/protocol_socket.py > > diff --git a/.gitignore b/.gitignore > index ce2be8a..bbcfa22 100644 > --- a/.gitignore > +++ b/.gitignore > @@ -23,6 +23,7 @@ > *.symtypes > *.elf > *.patch > +*.pyc > *.mcp > *.bct > *.dcd > diff --git a/scripts/serial/__init__.py b/scripts/serial/__init__.py > new file mode 100644 > index 0000000..33ae52e > --- /dev/null > +++ b/scripts/serial/__init__.py > @@ -0,0 +1,79 @@ > +#!/usr/bin/env python > + > +# portable serial port access with python > +# this is a wrapper module for different platform implementations > +# > +# (C) 2001-2010 Chris Liechti > +# this is distributed under a free software license, see license.txt > + > +VERSION = '2.7' > + > +import sys > + > +if sys.platform == 'cli': > + from serial.serialcli import * > +else: > + import os > + # chose an implementation, depending on os > + if os.name == 'nt': #sys.platform == 'win32': > + from serial.serialwin32 import * > + elif os.name == 'posix': > + from serial.serialposix import * > + elif os.name == 'java': > + from serial.serialjava import * > + else: > + raise ImportError("Sorry: no implementation for your platform ('%s') available" % (os.name,)) > + > + > +protocol_handler_packages = [ > + 'serial.urlhandler', > + ] > + > +def serial_for_url(url, *args, **kwargs): > + """\ > + Get an instance of the Serial class, depending on port/url. The port is not > + opened when the keyword parameter 'do_not_open' is true, by default it > + is. All other parameters are directly passed to the __init__ method when > + the port is instantiated. > + > + The list of package names that is searched for protocol handlers is kept in > + ``protocol_handler_packages``. > + > + e.g. we want to support a URL ``foobar://``. A module > + ``my_handlers.protocol_foobar`` is provided by the user. Then > + ``protocol_handler_packages.append("my_handlers")`` would extend the search > + path so that ``serial_for_url("foobar://"))`` would work. > + """ > + # check remove extra parameter to not confuse the Serial class > + do_open = 'do_not_open' not in kwargs or not kwargs['do_not_open'] > + if 'do_not_open' in kwargs: del kwargs['do_not_open'] > + # the default is to use the native version > + klass = Serial # 'native' implementation > + # check port type and get class > + try: > + url_nocase = url.lower() > + except AttributeError: > + # it's not a string, use default > + pass > + else: > + if '://' in url_nocase: > + protocol = url_nocase.split('://', 1)[0] > + for package_name in protocol_handler_packages: > + module_name = '%s.protocol_%s' % (package_name, protocol,) > + try: > + handler_module = __import__(module_name) > + except ImportError: > + pass > + else: > + klass = sys.modules[module_name].Serial > + break > + else: > + raise ValueError('invalid URL, protocol %r not known' % (protocol,)) > + else: > + klass = Serial # 'native' implementation > + # instantiate and open when desired > + instance = klass(None, *args, **kwargs) > + instance.port = url > + if do_open: > + instance.open() > + return instance > diff --git a/scripts/serial/rfc2217.py b/scripts/serial/rfc2217.py > new file mode 100644 > index 0000000..4fe1a72 > --- /dev/null > +++ b/scripts/serial/rfc2217.py > @@ -0,0 +1,1327 @@ > +#! python > +# > +# Python Serial Port Extension for Win32, Linux, BSD, Jython > +# see __init__.py > +# > +# This module implements a RFC2217 compatible client. RF2217 descibes a > +# protocol to access serial ports over TCP/IP and allows setting the baud rate, > +# modem control lines etc. > +# > +# (C) 2001-2013 Chris Liechti > +# this is distributed under a free software license, see license.txt > + > +# TODO: > +# - setting control line -> answer is not checked (had problems with one of the > +# severs). consider implementing a compatibility mode flag to make check > +# conditional > +# - write timeout not implemented at all > + > +############################################################################## > +# observations and issues with servers > +#============================================================================= > +# sredird V2.2.1 > +# - http://www.ibiblio.org/pub/Linux/system/serial/ sredird-2.2.2.tar.gz > +# - does not acknowledge SET_CONTROL (RTS/DTR) correctly, always responding > +# [105 1] instead of the actual value. > +# - SET_BAUDRATE answer contains 4 extra null bytes -> probably for larger > +# numbers than 2**32? > +# - To get the signature [COM_PORT_OPTION 0] has to be sent. > +# - run a server: while true; do nc -l -p 7000 -c "sredird debug /dev/ttyUSB0 /var/lock/sredir"; done > +#============================================================================= > +# telnetcpcd (untested) > +# - http://ftp.wayne.edu/kermit/sredird/telnetcpcd-1.09.tar.gz > +# - To get the signature [COM_PORT_OPTION] w/o data has to be sent. > +#============================================================================= > +# ser2net > +# - does not negotiate BINARY or COM_PORT_OPTION for his side but at least > +# acknowledges that the client activates these options > +# - The configuration may be that the server prints a banner. As this client > +# implementation does a flushInput on connect, this banner is hidden from > +# the user application. > +# - NOTIFY_MODEMSTATE: the poll interval of the server seems to be one > +# second. > +# - To get the signature [COM_PORT_OPTION 0] has to be sent. > +# - run a server: run ser2net daemon, in /etc/ser2net.conf: > +# 2000:telnet:0:/dev/ttyS0:9600 remctl banner > +############################################################################## > + > +# How to identify ports? pySerial might want to support other protocols in the > +# future, so lets use an URL scheme. > +# for RFC2217 compliant servers we will use this: > +# rfc2217://:[/option[/option...]] > +# > +# options: > +# - "debug" print diagnostic messages > +# - "ign_set_control": do not look at the answers to SET_CONTROL > +# - "poll_modem": issue NOTIFY_MODEMSTATE requests when CTS/DTR/RI/CD is read. > +# Without this option it expects that the server sends notifications > +# automatically on change (which most servers do and is according to the > +# RFC). > +# the order of the options is not relevant > + > +from serial.serialutil import * > +import time > +import struct > +import socket > +import threading > +import Queue > +import logging > + > +# port string is expected to be something like this: > +# rfc2217://host:port > +# host may be an IP or including domain, whatever. > +# port is 0...65535 > + > +# map log level names to constants. used in fromURL() > +LOGGER_LEVELS = { > + 'debug': logging.DEBUG, > + 'info': logging.INFO, > + 'warning': logging.WARNING, > + 'error': logging.ERROR, > + } > + > + > +# telnet protocol characters > +IAC = to_bytes([255]) # Interpret As Command > +DONT = to_bytes([254]) > +DO = to_bytes([253]) > +WONT = to_bytes([252]) > +WILL = to_bytes([251]) > +IAC_DOUBLED = to_bytes([IAC, IAC]) > + > +SE = to_bytes([240]) # Subnegotiation End > +NOP = to_bytes([241]) # No Operation > +DM = to_bytes([242]) # Data Mark > +BRK = to_bytes([243]) # Break > +IP = to_bytes([244]) # Interrupt process > +AO = to_bytes([245]) # Abort output > +AYT = to_bytes([246]) # Are You There > +EC = to_bytes([247]) # Erase Character > +EL = to_bytes([248]) # Erase Line > +GA = to_bytes([249]) # Go Ahead > +SB = to_bytes([250]) # Subnegotiation Begin > + > +# selected telnet options > +BINARY = to_bytes([0]) # 8-bit data path > +ECHO = to_bytes([1]) # echo > +SGA = to_bytes([3]) # suppress go ahead > + > +# RFC2217 > +COM_PORT_OPTION = to_bytes([44]) > + > +# Client to Access Server > +SET_BAUDRATE = to_bytes([1]) > +SET_DATASIZE = to_bytes([2]) > +SET_PARITY = to_bytes([3]) > +SET_STOPSIZE = to_bytes([4]) > +SET_CONTROL = to_bytes([5]) > +NOTIFY_LINESTATE = to_bytes([6]) > +NOTIFY_MODEMSTATE = to_bytes([7]) > +FLOWCONTROL_SUSPEND = to_bytes([8]) > +FLOWCONTROL_RESUME = to_bytes([9]) > +SET_LINESTATE_MASK = to_bytes([10]) > +SET_MODEMSTATE_MASK = to_bytes([11]) > +PURGE_DATA = to_bytes([12]) > + > +SERVER_SET_BAUDRATE = to_bytes([101]) > +SERVER_SET_DATASIZE = to_bytes([102]) > +SERVER_SET_PARITY = to_bytes([103]) > +SERVER_SET_STOPSIZE = to_bytes([104]) > +SERVER_SET_CONTROL = to_bytes([105]) > +SERVER_NOTIFY_LINESTATE = to_bytes([106]) > +SERVER_NOTIFY_MODEMSTATE = to_bytes([107]) > +SERVER_FLOWCONTROL_SUSPEND = to_bytes([108]) > +SERVER_FLOWCONTROL_RESUME = to_bytes([109]) > +SERVER_SET_LINESTATE_MASK = to_bytes([110]) > +SERVER_SET_MODEMSTATE_MASK = to_bytes([111]) > +SERVER_PURGE_DATA = to_bytes([112]) > + > +RFC2217_ANSWER_MAP = { > + SET_BAUDRATE: SERVER_SET_BAUDRATE, > + SET_DATASIZE: SERVER_SET_DATASIZE, > + SET_PARITY: SERVER_SET_PARITY, > + SET_STOPSIZE: SERVER_SET_STOPSIZE, > + SET_CONTROL: SERVER_SET_CONTROL, > + NOTIFY_LINESTATE: SERVER_NOTIFY_LINESTATE, > + NOTIFY_MODEMSTATE: SERVER_NOTIFY_MODEMSTATE, > + FLOWCONTROL_SUSPEND: SERVER_FLOWCONTROL_SUSPEND, > + FLOWCONTROL_RESUME: SERVER_FLOWCONTROL_RESUME, > + SET_LINESTATE_MASK: SERVER_SET_LINESTATE_MASK, > + SET_MODEMSTATE_MASK: SERVER_SET_MODEMSTATE_MASK, > + PURGE_DATA: SERVER_PURGE_DATA, > +} > + > +SET_CONTROL_REQ_FLOW_SETTING = to_bytes([0]) # Request Com Port Flow Control Setting (outbound/both) > +SET_CONTROL_USE_NO_FLOW_CONTROL = to_bytes([1]) # Use No Flow Control (outbound/both) > +SET_CONTROL_USE_SW_FLOW_CONTROL = to_bytes([2]) # Use XON/XOFF Flow Control (outbound/both) > +SET_CONTROL_USE_HW_FLOW_CONTROL = to_bytes([3]) # Use HARDWARE Flow Control (outbound/both) > +SET_CONTROL_REQ_BREAK_STATE = to_bytes([4]) # Request BREAK State > +SET_CONTROL_BREAK_ON = to_bytes([5]) # Set BREAK State ON > +SET_CONTROL_BREAK_OFF = to_bytes([6]) # Set BREAK State OFF > +SET_CONTROL_REQ_DTR = to_bytes([7]) # Request DTR Signal State > +SET_CONTROL_DTR_ON = to_bytes([8]) # Set DTR Signal State ON > +SET_CONTROL_DTR_OFF = to_bytes([9]) # Set DTR Signal State OFF > +SET_CONTROL_REQ_RTS = to_bytes([10]) # Request RTS Signal State > +SET_CONTROL_RTS_ON = to_bytes([11]) # Set RTS Signal State ON > +SET_CONTROL_RTS_OFF = to_bytes([12]) # Set RTS Signal State OFF > +SET_CONTROL_REQ_FLOW_SETTING_IN = to_bytes([13]) # Request Com Port Flow Control Setting (inbound) > +SET_CONTROL_USE_NO_FLOW_CONTROL_IN = to_bytes([14]) # Use No Flow Control (inbound) > +SET_CONTROL_USE_SW_FLOW_CONTOL_IN = to_bytes([15]) # Use XON/XOFF Flow Control (inbound) > +SET_CONTROL_USE_HW_FLOW_CONTOL_IN = to_bytes([16]) # Use HARDWARE Flow Control (inbound) > +SET_CONTROL_USE_DCD_FLOW_CONTROL = to_bytes([17]) # Use DCD Flow Control (outbound/both) > +SET_CONTROL_USE_DTR_FLOW_CONTROL = to_bytes([18]) # Use DTR Flow Control (inbound) > +SET_CONTROL_USE_DSR_FLOW_CONTROL = to_bytes([19]) # Use DSR Flow Control (outbound/both) > + > +LINESTATE_MASK_TIMEOUT = 128 # Time-out Error > +LINESTATE_MASK_SHIFTREG_EMPTY = 64 # Transfer Shift Register Empty > +LINESTATE_MASK_TRANSREG_EMPTY = 32 # Transfer Holding Register Empty > +LINESTATE_MASK_BREAK_DETECT = 16 # Break-detect Error > +LINESTATE_MASK_FRAMING_ERROR = 8 # Framing Error > +LINESTATE_MASK_PARTIY_ERROR = 4 # Parity Error > +LINESTATE_MASK_OVERRUN_ERROR = 2 # Overrun Error > +LINESTATE_MASK_DATA_READY = 1 # Data Ready > + > +MODEMSTATE_MASK_CD = 128 # Receive Line Signal Detect (also known as Carrier Detect) > +MODEMSTATE_MASK_RI = 64 # Ring Indicator > +MODEMSTATE_MASK_DSR = 32 # Data-Set-Ready Signal State > +MODEMSTATE_MASK_CTS = 16 # Clear-To-Send Signal State > +MODEMSTATE_MASK_CD_CHANGE = 8 # Delta Receive Line Signal Detect > +MODEMSTATE_MASK_RI_CHANGE = 4 # Trailing-edge Ring Detector > +MODEMSTATE_MASK_DSR_CHANGE = 2 # Delta Data-Set-Ready > +MODEMSTATE_MASK_CTS_CHANGE = 1 # Delta Clear-To-Send > + > +PURGE_RECEIVE_BUFFER = to_bytes([1]) # Purge access server receive data buffer > +PURGE_TRANSMIT_BUFFER = to_bytes([2]) # Purge access server transmit data buffer > +PURGE_BOTH_BUFFERS = to_bytes([3]) # Purge both the access server receive data buffer and the access server transmit data buffer > + > + > +RFC2217_PARITY_MAP = { > + PARITY_NONE: 1, > + PARITY_ODD: 2, > + PARITY_EVEN: 3, > + PARITY_MARK: 4, > + PARITY_SPACE: 5, > +} > +RFC2217_REVERSE_PARITY_MAP = dict((v,k) for k,v in RFC2217_PARITY_MAP.items()) > + > +RFC2217_STOPBIT_MAP = { > + STOPBITS_ONE: 1, > + STOPBITS_ONE_POINT_FIVE: 3, > + STOPBITS_TWO: 2, > +} > +RFC2217_REVERSE_STOPBIT_MAP = dict((v,k) for k,v in RFC2217_STOPBIT_MAP.items()) > + > +# Telnet filter states > +M_NORMAL = 0 > +M_IAC_SEEN = 1 > +M_NEGOTIATE = 2 > + > +# TelnetOption and TelnetSubnegotiation states > +REQUESTED = 'REQUESTED' > +ACTIVE = 'ACTIVE' > +INACTIVE = 'INACTIVE' > +REALLY_INACTIVE = 'REALLY_INACTIVE' > + > +class TelnetOption(object): > + """Manage a single telnet option, keeps track of DO/DONT WILL/WONT.""" > + > + def __init__(self, connection, name, option, send_yes, send_no, ack_yes, ack_no, initial_state, activation_callback=None): > + """\ > + Initialize option. > + :param connection: connection used to transmit answers > + :param name: a readable name for debug outputs > + :param send_yes: what to send when option is to be enabled. > + :param send_no: what to send when option is to be disabled. > + :param ack_yes: what to expect when remote agrees on option. > + :param ack_no: what to expect when remote disagrees on option. > + :param initial_state: options initialized with REQUESTED are tried to > + be enabled on startup. use INACTIVE for all others. > + """ > + self.connection = connection > + self.name = name > + self.option = option > + self.send_yes = send_yes > + self.send_no = send_no > + self.ack_yes = ack_yes > + self.ack_no = ack_no > + self.state = initial_state > + self.active = False > + self.activation_callback = activation_callback > + > + def __repr__(self): > + """String for debug outputs""" > + return "%s:%s(%s)" % (self.name, self.active, self.state) > + > + def process_incoming(self, command): > + """\ > + A DO/DONT/WILL/WONT was received for this option, update state and > + answer when needed. > + """ > + if command == self.ack_yes: > + if self.state is REQUESTED: > + self.state = ACTIVE > + self.active = True > + if self.activation_callback is not None: > + self.activation_callback() > + elif self.state is ACTIVE: > + pass > + elif self.state is INACTIVE: > + self.state = ACTIVE > + self.connection.telnetSendOption(self.send_yes, self.option) > + self.active = True > + if self.activation_callback is not None: > + self.activation_callback() > + elif self.state is REALLY_INACTIVE: > + self.connection.telnetSendOption(self.send_no, self.option) > + else: > + raise ValueError('option in illegal state %r' % self) > + elif command == self.ack_no: > + if self.state is REQUESTED: > + self.state = INACTIVE > + self.active = False > + elif self.state is ACTIVE: > + self.state = INACTIVE > + self.connection.telnetSendOption(self.send_no, self.option) > + self.active = False > + elif self.state is INACTIVE: > + pass > + elif self.state is REALLY_INACTIVE: > + pass > + else: > + raise ValueError('option in illegal state %r' % self) > + > + > +class TelnetSubnegotiation(object): > + """\ > + A object to handle subnegotiation of options. In this case actually > + sub-sub options for RFC 2217. It is used to track com port options. > + """ > + > + def __init__(self, connection, name, option, ack_option=None): > + if ack_option is None: ack_option = option > + self.connection = connection > + self.name = name > + self.option = option > + self.value = None > + self.ack_option = ack_option > + self.state = INACTIVE > + > + def __repr__(self): > + """String for debug outputs.""" > + return "%s:%s" % (self.name, self.state) > + > + def set(self, value): > + """\ > + Request a change of the value. a request is sent to the server. if > + the client needs to know if the change is performed he has to check the > + state of this object. > + """ > + self.value = value > + self.state = REQUESTED > + self.connection.rfc2217SendSubnegotiation(self.option, self.value) > + if self.connection.logger: > + self.connection.logger.debug("SB Requesting %s -> %r" % (self.name, self.value)) > + > + def isReady(self): > + """\ > + Check if answer from server has been received. when server rejects > + the change, raise a ValueError. > + """ > + if self.state == REALLY_INACTIVE: > + raise ValueError("remote rejected value for option %r" % (self.name)) > + return self.state == ACTIVE > + # add property to have a similar interface as TelnetOption > + active = property(isReady) > + > + def wait(self, timeout=3): > + """\ > + Wait until the subnegotiation has been acknowledged or timeout. It > + can also throw a value error when the answer from the server does not > + match the value sent. > + """ > + timeout_time = time.time() + timeout > + while time.time() < timeout_time: > + time.sleep(0.05) # prevent 100% CPU load > + if self.isReady(): > + break > + else: > + raise SerialException("timeout while waiting for option %r" % (self.name)) > + > + def checkAnswer(self, suboption): > + """\ > + Check an incoming subnegotiation block. The parameter already has > + cut off the header like sub option number and com port option value. > + """ > + if self.value == suboption[:len(self.value)]: > + self.state = ACTIVE > + else: > + # error propagation done in isReady > + self.state = REALLY_INACTIVE > + if self.connection.logger: > + self.connection.logger.debug("SB Answer %s -> %r -> %s" % (self.name, suboption, self.state)) > + > + > +class RFC2217Serial(SerialBase): > + """Serial port implementation for RFC 2217 remote serial ports.""" > + > + BAUDRATES = (50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, > + 9600, 19200, 38400, 57600, 115200) > + > + def open(self): > + """\ > + Open port with current settings. This may throw a SerialException > + if the port cannot be opened. > + """ > + self.logger = None > + self._ignore_set_control_answer = False > + self._poll_modem_state = False > + self._network_timeout = 3 > + if self._port is None: > + raise SerialException("Port must be configured before it can be used.") > + if self._isOpen: > + raise SerialException("Port is already open.") > + try: > + self._socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM) > + self._socket.connect(self.fromURL(self.portstr)) > + self._socket.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1) > + except Exception, msg: > + self._socket = None > + raise SerialException("Could not open port %s: %s" % (self.portstr, msg)) > + > + self._socket.settimeout(5) # XXX good value? > + > + # use a thread save queue as buffer. it also simplifies implementing > + # the read timeout > + self._read_buffer = Queue.Queue() > + # to ensure that user writes does not interfere with internal > + # telnet/rfc2217 options establish a lock > + self._write_lock = threading.Lock() > + # name the following separately so that, below, a check can be easily done > + mandadory_options = [ > + TelnetOption(self, 'we-BINARY', BINARY, WILL, WONT, DO, DONT, INACTIVE), > + TelnetOption(self, 'we-RFC2217', COM_PORT_OPTION, WILL, WONT, DO, DONT, REQUESTED), > + ] > + # all supported telnet options > + self._telnet_options = [ > + TelnetOption(self, 'ECHO', ECHO, DO, DONT, WILL, WONT, REQUESTED), > + TelnetOption(self, 'we-SGA', SGA, WILL, WONT, DO, DONT, REQUESTED), > + TelnetOption(self, 'they-SGA', SGA, DO, DONT, WILL, WONT, REQUESTED), > + TelnetOption(self, 'they-BINARY', BINARY, DO, DONT, WILL, WONT, INACTIVE), > + TelnetOption(self, 'they-RFC2217', COM_PORT_OPTION, DO, DONT, WILL, WONT, REQUESTED), > + ] + mandadory_options > + # RFC 2217 specific states > + # COM port settings > + self._rfc2217_port_settings = { > + 'baudrate': TelnetSubnegotiation(self, 'baudrate', SET_BAUDRATE, SERVER_SET_BAUDRATE), > + 'datasize': TelnetSubnegotiation(self, 'datasize', SET_DATASIZE, SERVER_SET_DATASIZE), > + 'parity': TelnetSubnegotiation(self, 'parity', SET_PARITY, SERVER_SET_PARITY), > + 'stopsize': TelnetSubnegotiation(self, 'stopsize', SET_STOPSIZE, SERVER_SET_STOPSIZE), > + } > + # There are more subnegotiation objects, combine all in one dictionary > + # for easy access > + self._rfc2217_options = { > + 'purge': TelnetSubnegotiation(self, 'purge', PURGE_DATA, SERVER_PURGE_DATA), > + 'control': TelnetSubnegotiation(self, 'control', SET_CONTROL, SERVER_SET_CONTROL), > + } > + self._rfc2217_options.update(self._rfc2217_port_settings) > + # cache for line and modem states that the server sends to us > + self._linestate = 0 > + self._modemstate = None > + self._modemstate_expires = 0 > + # RFC 2217 flow control between server and client > + self._remote_suspend_flow = False > + > + self._thread = threading.Thread(target=self._telnetReadLoop) > + self._thread.setDaemon(True) > + self._thread.setName('pySerial RFC 2217 reader thread for %s' % (self._port,)) > + self._thread.start() > + > + # negotiate Telnet/RFC 2217 -> send initial requests > + for option in self._telnet_options: > + if option.state is REQUESTED: > + self.telnetSendOption(option.send_yes, option.option) > + # now wait until important options are negotiated > + timeout_time = time.time() + self._network_timeout > + while time.time() < timeout_time: > + time.sleep(0.05) # prevent 100% CPU load > + if sum(o.active for o in mandadory_options) == sum(o.state != INACTIVE for o in mandadory_options): > + break > + else: > + raise SerialException("Remote does not seem to support RFC2217 or BINARY mode %r" % mandadory_options) > + if self.logger: > + self.logger.info("Negotiated options: %s" % self._telnet_options) > + > + # fine, go on, set RFC 2271 specific things > + self._reconfigurePort() > + # all things set up get, now a clean start > + self._isOpen = True > + if not self._rtscts: > + self.setRTS(True) > + self.setDTR(True) > + self.flushInput() > + self.flushOutput() > + > + def _reconfigurePort(self): > + """Set communication parameters on opened port.""" > + if self._socket is None: > + raise SerialException("Can only operate on open ports") > + > + # if self._timeout != 0 and self._interCharTimeout is not None: > + # XXX > + > + if self._writeTimeout is not None: > + raise NotImplementedError('writeTimeout is currently not supported') > + # XXX > + > + # Setup the connection > + # to get good performance, all parameter changes are sent first... > + if not isinstance(self._baudrate, (int, long)) or not 0 < self._baudrate < 2**32: > + raise ValueError("invalid baudrate: %r" % (self._baudrate)) > + self._rfc2217_port_settings['baudrate'].set(struct.pack('!I', self._baudrate)) > + self._rfc2217_port_settings['datasize'].set(struct.pack('!B', self._bytesize)) > + self._rfc2217_port_settings['parity'].set(struct.pack('!B', RFC2217_PARITY_MAP[self._parity])) > + self._rfc2217_port_settings['stopsize'].set(struct.pack('!B', RFC2217_STOPBIT_MAP[self._stopbits])) > + > + # and now wait until parameters are active > + items = self._rfc2217_port_settings.values() > + if self.logger: > + self.logger.debug("Negotiating settings: %s" % (items,)) > + timeout_time = time.time() + self._network_timeout > + while time.time() < timeout_time: > + time.sleep(0.05) # prevent 100% CPU load > + if sum(o.active for o in items) == len(items): > + break > + else: > + raise SerialException("Remote does not accept parameter change (RFC2217): %r" % items) > + if self.logger: > + self.logger.info("Negotiated settings: %s" % (items,)) > + > + if self._rtscts and self._xonxoff: > + raise ValueError('xonxoff and rtscts together are not supported') > + elif self._rtscts: > + self.rfc2217SetControl(SET_CONTROL_USE_HW_FLOW_CONTROL) > + elif self._xonxoff: > + self.rfc2217SetControl(SET_CONTROL_USE_SW_FLOW_CONTROL) > + else: > + self.rfc2217SetControl(SET_CONTROL_USE_NO_FLOW_CONTROL) > + > + def close(self): > + """Close port""" > + if self._isOpen: > + if self._socket: > + try: > + self._socket.shutdown(socket.SHUT_RDWR) > + self._socket.close() > + except: > + # ignore errors. > + pass > + self._socket = None > + if self._thread: > + self._thread.join() > + self._isOpen = False > + # in case of quick reconnects, give the server some time > + time.sleep(0.3) > + > + def makeDeviceName(self, port): > + raise SerialException("there is no sensible way to turn numbers into URLs") > + > + def fromURL(self, url): > + """extract host and port from an URL string""" > + if url.lower().startswith("rfc2217://"): url = url[10:] > + try: > + # is there a "path" (our options)? > + if '/' in url: > + # cut away options > + url, options = url.split('/', 1) > + # process options now, directly altering self > + for option in options.split('/'): > + if '=' in option: > + option, value = option.split('=', 1) > + else: > + value = None > + if option == 'logging': > + logging.basicConfig() # XXX is that good to call it here? > + self.logger = logging.getLogger('pySerial.rfc2217') > + self.logger.setLevel(LOGGER_LEVELS[value]) > + self.logger.debug('enabled logging') > + elif option == 'ign_set_control': > + self._ignore_set_control_answer = True > + elif option == 'poll_modem': > + self._poll_modem_state = True > + elif option == 'timeout': > + self._network_timeout = float(value) > + else: > + raise ValueError('unknown option: %r' % (option,)) > + # get host and port > + host, port = url.split(':', 1) # may raise ValueError because of unpacking > + port = int(port) # and this if it's not a number > + if not 0 <= port < 65536: raise ValueError("port not in range 0...65535") > + except ValueError, e: > + raise SerialException('expected a string in the form "[rfc2217://]:[/option[/option...]]": %s' % e) > + return (host, port) > + > + # - - - - - - - - - - - - - - - - - - - - - - - - > + > + def inWaiting(self): > + """Return the number of characters currently in the input buffer.""" > + if not self._isOpen: raise portNotOpenError > + return self._read_buffer.qsize() > + > + def read(self, size=1): > + """\ > + Read size bytes from the serial port. If a timeout is set it may > + return less characters as requested. With no timeout it will block > + until the requested number of bytes is read. > + """ > + if not self._isOpen: raise portNotOpenError > + data = bytearray() > + try: > + while len(data) < size: > + if self._thread is None: > + raise SerialException('connection failed (reader thread died)') > + data.append(self._read_buffer.get(True, self._timeout)) > + except Queue.Empty: # -> timeout > + pass > + return bytes(data) > + > + def write(self, data): > + """\ > + Output the given string over the serial port. Can block if the > + connection is blocked. May raise SerialException if the connection is > + closed. > + """ > + if not self._isOpen: raise portNotOpenError > + self._write_lock.acquire() > + try: > + try: > + self._socket.sendall(to_bytes(data).replace(IAC, IAC_DOUBLED)) > + except socket.error, e: > + raise SerialException("connection failed (socket error): %s" % e) # XXX what exception if socket connection fails > + finally: > + self._write_lock.release() > + return len(data) > + > + def flushInput(self): > + """Clear input buffer, discarding all that is in the buffer.""" > + if not self._isOpen: raise portNotOpenError > + self.rfc2217SendPurge(PURGE_RECEIVE_BUFFER) > + # empty read buffer > + while self._read_buffer.qsize(): > + self._read_buffer.get(False) > + > + def flushOutput(self): > + """\ > + Clear output buffer, aborting the current output and > + discarding all that is in the buffer. > + """ > + if not self._isOpen: raise portNotOpenError > + self.rfc2217SendPurge(PURGE_TRANSMIT_BUFFER) > + > + def sendBreak(self, duration=0.25): > + """\ > + Send break condition. Timed, returns to idle state after given > + duration. > + """ > + if not self._isOpen: raise portNotOpenError > + self.setBreak(True) > + time.sleep(duration) > + self.setBreak(False) > + > + def setBreak(self, level=True): > + """\ > + Set break: Controls TXD. When active, to transmitting is > + possible. > + """ > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('set BREAK to %s' % ('inactive', 'active')[bool(level)]) > + if level: > + self.rfc2217SetControl(SET_CONTROL_BREAK_ON) > + else: > + self.rfc2217SetControl(SET_CONTROL_BREAK_OFF) > + > + def setRTS(self, level=True): > + """Set terminal status line: Request To Send.""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('set RTS to %s' % ('inactive', 'active')[bool(level)]) > + if level: > + self.rfc2217SetControl(SET_CONTROL_RTS_ON) > + else: > + self.rfc2217SetControl(SET_CONTROL_RTS_OFF) > + > + def setDTR(self, level=True): > + """Set terminal status line: Data Terminal Ready.""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('set DTR to %s' % ('inactive', 'active')[bool(level)]) > + if level: > + self.rfc2217SetControl(SET_CONTROL_DTR_ON) > + else: > + self.rfc2217SetControl(SET_CONTROL_DTR_OFF) > + > + def getCTS(self): > + """Read terminal status line: Clear To Send.""" > + if not self._isOpen: raise portNotOpenError > + return bool(self.getModemState() & MODEMSTATE_MASK_CTS) > + > + def getDSR(self): > + """Read terminal status line: Data Set Ready.""" > + if not self._isOpen: raise portNotOpenError > + return bool(self.getModemState() & MODEMSTATE_MASK_DSR) > + > + def getRI(self): > + """Read terminal status line: Ring Indicator.""" > + if not self._isOpen: raise portNotOpenError > + return bool(self.getModemState() & MODEMSTATE_MASK_RI) > + > + def getCD(self): > + """Read terminal status line: Carrier Detect.""" > + if not self._isOpen: raise portNotOpenError > + return bool(self.getModemState() & MODEMSTATE_MASK_CD) > + > + # - - - platform specific - - - > + # None so far > + > + # - - - RFC2217 specific - - - > + > + def _telnetReadLoop(self): > + """Read loop for the socket.""" > + mode = M_NORMAL > + suboption = None > + try: > + while self._socket is not None: > + try: > + data = self._socket.recv(1024) > + except socket.timeout: > + # just need to get out of recv form time to time to check if > + # still alive > + continue > + except socket.error, e: > + # connection fails -> terminate loop > + if self.logger: > + self.logger.debug("socket error in reader thread: %s" % (e,)) > + break > + if not data: break # lost connection > + for byte in data: > + if mode == M_NORMAL: > + # interpret as command or as data > + if byte == IAC: > + mode = M_IAC_SEEN > + else: > + # store data in read buffer or sub option buffer > + # depending on state > + if suboption is not None: > + suboption.append(byte) > + else: > + self._read_buffer.put(byte) > + elif mode == M_IAC_SEEN: > + if byte == IAC: > + # interpret as command doubled -> insert character > + # itself > + if suboption is not None: > + suboption.append(IAC) > + else: > + self._read_buffer.put(IAC) > + mode = M_NORMAL > + elif byte == SB: > + # sub option start > + suboption = bytearray() > + mode = M_NORMAL > + elif byte == SE: > + # sub option end -> process it now > + self._telnetProcessSubnegotiation(bytes(suboption)) > + suboption = None > + mode = M_NORMAL > + elif byte in (DO, DONT, WILL, WONT): > + # negotiation > + telnet_command = byte > + mode = M_NEGOTIATE > + else: > + # other telnet commands > + self._telnetProcessCommand(byte) > + mode = M_NORMAL > + elif mode == M_NEGOTIATE: # DO, DONT, WILL, WONT was received, option now following > + self._telnetNegotiateOption(telnet_command, byte) > + mode = M_NORMAL > + finally: > + self._thread = None > + if self.logger: > + self.logger.debug("read thread terminated") > + > + # - incoming telnet commands and options > + > + def _telnetProcessCommand(self, command): > + """Process commands other than DO, DONT, WILL, WONT.""" > + # Currently none. RFC2217 only uses negotiation and subnegotiation. > + if self.logger: > + self.logger.warning("ignoring Telnet command: %r" % (command,)) > + > + def _telnetNegotiateOption(self, command, option): > + """Process incoming DO, DONT, WILL, WONT.""" > + # check our registered telnet options and forward command to them > + # they know themselves if they have to answer or not > + known = False > + for item in self._telnet_options: > + # can have more than one match! as some options are duplicated for > + # 'us' and 'them' > + if item.option == option: > + item.process_incoming(command) > + known = True > + if not known: > + # handle unknown options > + # only answer to positive requests and deny them > + if command == WILL or command == DO: > + self.telnetSendOption((command == WILL and DONT or WONT), option) > + if self.logger: > + self.logger.warning("rejected Telnet option: %r" % (option,)) > + > + > + def _telnetProcessSubnegotiation(self, suboption): > + """Process subnegotiation, the data between IAC SB and IAC SE.""" > + if suboption[0:1] == COM_PORT_OPTION: > + if suboption[1:2] == SERVER_NOTIFY_LINESTATE and len(suboption) >= 3: > + self._linestate = ord(suboption[2:3]) # ensure it is a number > + if self.logger: > + self.logger.info("NOTIFY_LINESTATE: %s" % self._linestate) > + elif suboption[1:2] == SERVER_NOTIFY_MODEMSTATE and len(suboption) >= 3: > + self._modemstate = ord(suboption[2:3]) # ensure it is a number > + if self.logger: > + self.logger.info("NOTIFY_MODEMSTATE: %s" % self._modemstate) > + # update time when we think that a poll would make sense > + self._modemstate_expires = time.time() + 0.3 > + elif suboption[1:2] == FLOWCONTROL_SUSPEND: > + self._remote_suspend_flow = True > + elif suboption[1:2] == FLOWCONTROL_RESUME: > + self._remote_suspend_flow = False > + else: > + for item in self._rfc2217_options.values(): > + if item.ack_option == suboption[1:2]: > + #~ print "processing COM_PORT_OPTION: %r" % list(suboption[1:]) > + item.checkAnswer(bytes(suboption[2:])) > + break > + else: > + if self.logger: > + self.logger.warning("ignoring COM_PORT_OPTION: %r" % (suboption,)) > + else: > + if self.logger: > + self.logger.warning("ignoring subnegotiation: %r" % (suboption,)) > + > + # - outgoing telnet commands and options > + > + def _internal_raw_write(self, data): > + """internal socket write with no data escaping. used to send telnet stuff.""" > + self._write_lock.acquire() > + try: > + self._socket.sendall(data) > + finally: > + self._write_lock.release() > + > + def telnetSendOption(self, action, option): > + """Send DO, DONT, WILL, WONT.""" > + self._internal_raw_write(to_bytes([IAC, action, option])) > + > + def rfc2217SendSubnegotiation(self, option, value=''): > + """Subnegotiation of RFC2217 parameters.""" > + value = value.replace(IAC, IAC_DOUBLED) > + self._internal_raw_write(to_bytes([IAC, SB, COM_PORT_OPTION, option] + list(value) + [IAC, SE])) > + > + def rfc2217SendPurge(self, value): > + item = self._rfc2217_options['purge'] > + item.set(value) # transmit desired purge type > + item.wait(self._network_timeout) # wait for acknowledge from the server > + > + def rfc2217SetControl(self, value): > + item = self._rfc2217_options['control'] > + item.set(value) # transmit desired control type > + if self._ignore_set_control_answer: > + # answers are ignored when option is set. compatibility mode for > + # servers that answer, but not the expected one... (or no answer > + # at all) i.e. sredird > + time.sleep(0.1) # this helps getting the unit tests passed > + else: > + item.wait(self._network_timeout) # wait for acknowledge from the server > + > + def rfc2217FlowServerReady(self): > + """\ > + check if server is ready to receive data. block for some time when > + not. > + """ > + #~ if self._remote_suspend_flow: > + #~ wait--- > + > + def getModemState(self): > + """\ > + get last modem state (cached value. If value is "old", request a new > + one. This cache helps that we don't issue to many requests when e.g. all > + status lines, one after the other is queried by the user (getCTS, getDSR > + etc.) > + """ > + # active modem state polling enabled? is the value fresh enough? > + if self._poll_modem_state and self._modemstate_expires < time.time(): > + if self.logger: > + self.logger.debug('polling modem state') > + # when it is older, request an update > + self.rfc2217SendSubnegotiation(NOTIFY_MODEMSTATE) > + timeout_time = time.time() + self._network_timeout > + while time.time() < timeout_time: > + time.sleep(0.05) # prevent 100% CPU load > + # when expiration time is updated, it means that there is a new > + # value > + if self._modemstate_expires > time.time(): > + if self.logger: > + self.logger.warning('poll for modem state failed') > + break > + # even when there is a timeout, do not generate an error just > + # return the last known value. this way we can support buggy > + # servers that do not respond to polls, but send automatic > + # updates. > + if self._modemstate is not None: > + if self.logger: > + self.logger.debug('using cached modem state') > + return self._modemstate > + else: > + # never received a notification from the server > + raise SerialException("remote sends no NOTIFY_MODEMSTATE") > + > + > +# assemble Serial class with the platform specific implementation and the base > +# for file-like behavior. for Python 2.6 and newer, that provide the new I/O > +# library, derive from io.RawIOBase > +try: > + import io > +except ImportError: > + # classic version with our own file-like emulation > + class Serial(RFC2217Serial, FileLike): > + pass > +else: > + # io library present > + class Serial(RFC2217Serial, io.RawIOBase): > + pass > + > + > +############################################################################# > +# The following is code that helps implementing an RFC 2217 server. > + > +class PortManager(object): > + """\ > + This class manages the state of Telnet and RFC 2217. It needs a serial > + instance and a connection to work with. Connection is expected to implement > + a (thread safe) write function, that writes the string to the network. > + """ > + > + def __init__(self, serial_port, connection, logger=None): > + self.serial = serial_port > + self.connection = connection > + self.logger = logger > + self._client_is_rfc2217 = False > + > + # filter state machine > + self.mode = M_NORMAL > + self.suboption = None > + self.telnet_command = None > + > + # states for modem/line control events > + self.modemstate_mask = 255 > + self.last_modemstate = None > + self.linstate_mask = 0 > + > + # all supported telnet options > + self._telnet_options = [ > + TelnetOption(self, 'ECHO', ECHO, WILL, WONT, DO, DONT, REQUESTED), > + TelnetOption(self, 'we-SGA', SGA, WILL, WONT, DO, DONT, REQUESTED), > + TelnetOption(self, 'they-SGA', SGA, DO, DONT, WILL, WONT, INACTIVE), > + TelnetOption(self, 'we-BINARY', BINARY, WILL, WONT, DO, DONT, INACTIVE), > + TelnetOption(self, 'they-BINARY', BINARY, DO, DONT, WILL, WONT, REQUESTED), > + TelnetOption(self, 'we-RFC2217', COM_PORT_OPTION, WILL, WONT, DO, DONT, REQUESTED, self._client_ok), > + TelnetOption(self, 'they-RFC2217', COM_PORT_OPTION, DO, DONT, WILL, WONT, INACTIVE, self._client_ok), > + ] > + > + # negotiate Telnet/RFC2217 -> send initial requests > + if self.logger: > + self.logger.debug("requesting initial Telnet/RFC 2217 options") > + for option in self._telnet_options: > + if option.state is REQUESTED: > + self.telnetSendOption(option.send_yes, option.option) > + # issue 1st modem state notification > + > + def _client_ok(self): > + """\ > + callback of telnet option. It gets called when option is activated. > + This one here is used to detect when the client agrees on RFC 2217. A > + flag is set so that other functions like check_modem_lines know if the > + client is OK. > + """ > + # The callback is used for we and they so if one party agrees, we're > + # already happy. it seems not all servers do the negotiation correctly > + # and i guess there are incorrect clients too.. so be happy if client > + # answers one or the other positively. > + self._client_is_rfc2217 = True > + if self.logger: > + self.logger.info("client accepts RFC 2217") > + # this is to ensure that the client gets a notification, even if there > + # was no change > + self.check_modem_lines(force_notification=True) > + > + # - outgoing telnet commands and options > + > + def telnetSendOption(self, action, option): > + """Send DO, DONT, WILL, WONT.""" > + self.connection.write(to_bytes([IAC, action, option])) > + > + def rfc2217SendSubnegotiation(self, option, value=''): > + """Subnegotiation of RFC 2217 parameters.""" > + value = value.replace(IAC, IAC_DOUBLED) > + self.connection.write(to_bytes([IAC, SB, COM_PORT_OPTION, option] + list(value) + [IAC, SE])) > + > + # - check modem lines, needs to be called periodically from user to > + # establish polling > + > + def check_modem_lines(self, force_notification=False): > + modemstate = ( > + (self.serial.getCTS() and MODEMSTATE_MASK_CTS) | > + (self.serial.getDSR() and MODEMSTATE_MASK_DSR) | > + (self.serial.getRI() and MODEMSTATE_MASK_RI) | > + (self.serial.getCD() and MODEMSTATE_MASK_CD) > + ) > + # check what has changed > + deltas = modemstate ^ (self.last_modemstate or 0) # when last is None -> 0 > + if deltas & MODEMSTATE_MASK_CTS: > + modemstate |= MODEMSTATE_MASK_CTS_CHANGE > + if deltas & MODEMSTATE_MASK_DSR: > + modemstate |= MODEMSTATE_MASK_DSR_CHANGE > + if deltas & MODEMSTATE_MASK_RI: > + modemstate |= MODEMSTATE_MASK_RI_CHANGE > + if deltas & MODEMSTATE_MASK_CD: > + modemstate |= MODEMSTATE_MASK_CD_CHANGE > + # if new state is different and the mask allows this change, send > + # notification. suppress notifications when client is not rfc2217 > + if modemstate != self.last_modemstate or force_notification: > + if (self._client_is_rfc2217 and (modemstate & self.modemstate_mask)) or force_notification: > + self.rfc2217SendSubnegotiation( > + SERVER_NOTIFY_MODEMSTATE, > + to_bytes([modemstate & self.modemstate_mask]) > + ) > + if self.logger: > + self.logger.info("NOTIFY_MODEMSTATE: %s" % (modemstate,)) > + # save last state, but forget about deltas. > + # otherwise it would also notify about changing deltas which is > + # probably not very useful > + self.last_modemstate = modemstate & 0xf0 > + > + # - outgoing data escaping > + > + def escape(self, data): > + """\ > + This generator function is for the user. All outgoing data has to be > + properly escaped, so that no IAC character in the data stream messes up > + the Telnet state machine in the server. > + > + socket.sendall(escape(data)) > + """ > + for byte in data: > + if byte == IAC: > + yield IAC > + yield IAC > + else: > + yield byte > + > + # - incoming data filter > + > + def filter(self, data): > + """\ > + Handle a bunch of incoming bytes. This is a generator. It will yield > + all characters not of interest for Telnet/RFC 2217. > + > + The idea is that the reader thread pushes data from the socket through > + this filter: > + > + for byte in filter(socket.recv(1024)): > + # do things like CR/LF conversion/whatever > + # and write data to the serial port > + serial.write(byte) > + > + (socket error handling code left as exercise for the reader) > + """ > + for byte in data: > + if self.mode == M_NORMAL: > + # interpret as command or as data > + if byte == IAC: > + self.mode = M_IAC_SEEN > + else: > + # store data in sub option buffer or pass it to our > + # consumer depending on state > + if self.suboption is not None: > + self.suboption.append(byte) > + else: > + yield byte > + elif self.mode == M_IAC_SEEN: > + if byte == IAC: > + # interpret as command doubled -> insert character > + # itself > + if self.suboption is not None: > + self.suboption.append(byte) > + else: > + yield byte > + self.mode = M_NORMAL > + elif byte == SB: > + # sub option start > + self.suboption = bytearray() > + self.mode = M_NORMAL > + elif byte == SE: > + # sub option end -> process it now > + self._telnetProcessSubnegotiation(bytes(self.suboption)) > + self.suboption = None > + self.mode = M_NORMAL > + elif byte in (DO, DONT, WILL, WONT): > + # negotiation > + self.telnet_command = byte > + self.mode = M_NEGOTIATE > + else: > + # other telnet commands > + self._telnetProcessCommand(byte) > + self.mode = M_NORMAL > + elif self.mode == M_NEGOTIATE: # DO, DONT, WILL, WONT was received, option now following > + self._telnetNegotiateOption(self.telnet_command, byte) > + self.mode = M_NORMAL > + > + # - incoming telnet commands and options > + > + def _telnetProcessCommand(self, command): > + """Process commands other than DO, DONT, WILL, WONT.""" > + # Currently none. RFC2217 only uses negotiation and subnegotiation. > + if self.logger: > + self.logger.warning("ignoring Telnet command: %r" % (command,)) > + > + def _telnetNegotiateOption(self, command, option): > + """Process incoming DO, DONT, WILL, WONT.""" > + # check our registered telnet options and forward command to them > + # they know themselves if they have to answer or not > + known = False > + for item in self._telnet_options: > + # can have more than one match! as some options are duplicated for > + # 'us' and 'them' > + if item.option == option: > + item.process_incoming(command) > + known = True > + if not known: > + # handle unknown options > + # only answer to positive requests and deny them > + if command == WILL or command == DO: > + self.telnetSendOption((command == WILL and DONT or WONT), option) > + if self.logger: > + self.logger.warning("rejected Telnet option: %r" % (option,)) > + > + > + def _telnetProcessSubnegotiation(self, suboption): > + """Process subnegotiation, the data between IAC SB and IAC SE.""" > + if suboption[0:1] == COM_PORT_OPTION: > + if self.logger: > + self.logger.debug('received COM_PORT_OPTION: %r' % (suboption,)) > + if suboption[1:2] == SET_BAUDRATE: > + backup = self.serial.baudrate > + try: > + (baudrate,) = struct.unpack("!I", suboption[2:6]) > + if baudrate != 0: > + self.serial.baudrate = baudrate > + except ValueError, e: > + if self.logger: > + self.logger.error("failed to set baud rate: %s" % (e,)) > + self.serial.baudrate = backup > + else: > + if self.logger: > + self.logger.info("%s baud rate: %s" % (baudrate and 'set' or 'get', self.serial.baudrate)) > + self.rfc2217SendSubnegotiation(SERVER_SET_BAUDRATE, struct.pack("!I", self.serial.baudrate)) > + elif suboption[1:2] == SET_DATASIZE: > + backup = self.serial.bytesize > + try: > + (datasize,) = struct.unpack("!B", suboption[2:3]) > + if datasize != 0: > + self.serial.bytesize = datasize > + except ValueError, e: > + if self.logger: > + self.logger.error("failed to set data size: %s" % (e,)) > + self.serial.bytesize = backup > + else: > + if self.logger: > + self.logger.info("%s data size: %s" % (datasize and 'set' or 'get', self.serial.bytesize)) > + self.rfc2217SendSubnegotiation(SERVER_SET_DATASIZE, struct.pack("!B", self.serial.bytesize)) > + elif suboption[1:2] == SET_PARITY: > + backup = self.serial.parity > + try: > + parity = struct.unpack("!B", suboption[2:3])[0] > + if parity != 0: > + self.serial.parity = RFC2217_REVERSE_PARITY_MAP[parity] > + except ValueError, e: > + if self.logger: > + self.logger.error("failed to set parity: %s" % (e,)) > + self.serial.parity = backup > + else: > + if self.logger: > + self.logger.info("%s parity: %s" % (parity and 'set' or 'get', self.serial.parity)) > + self.rfc2217SendSubnegotiation( > + SERVER_SET_PARITY, > + struct.pack("!B", RFC2217_PARITY_MAP[self.serial.parity]) > + ) > + elif suboption[1:2] == SET_STOPSIZE: > + backup = self.serial.stopbits > + try: > + stopbits = struct.unpack("!B", suboption[2:3])[0] > + if stopbits != 0: > + self.serial.stopbits = RFC2217_REVERSE_STOPBIT_MAP[stopbits] > + except ValueError, e: > + if self.logger: > + self.logger.error("failed to set stop bits: %s" % (e,)) > + self.serial.stopbits = backup > + else: > + if self.logger: > + self.logger.info("%s stop bits: %s" % (stopbits and 'set' or 'get', self.serial.stopbits)) > + self.rfc2217SendSubnegotiation( > + SERVER_SET_STOPSIZE, > + struct.pack("!B", RFC2217_STOPBIT_MAP[self.serial.stopbits]) > + ) > + elif suboption[1:2] == SET_CONTROL: > + if suboption[2:3] == SET_CONTROL_REQ_FLOW_SETTING: > + if self.serial.xonxoff: > + self.rfc2217SendSubnegotiation(SERVER_SET_CONTROL, SET_CONTROL_USE_SW_FLOW_CONTROL) > + elif self.serial.rtscts: > + self.rfc2217SendSubnegotiation(SERVER_SET_CONTROL, SET_CONTROL_USE_HW_FLOW_CONTROL) > + else: > + self.rfc2217SendSubnegotiation(SERVER_SET_CONTROL, SET_CONTROL_USE_NO_FLOW_CONTROL) > + elif suboption[2:3] == SET_CONTROL_USE_NO_FLOW_CONTROL: > + self.serial.xonxoff = False > + self.serial.rtscts = False > + if self.logger: > + self.logger.info("changed flow control to None") > + self.rfc2217SendSubnegotiation(SERVER_SET_CONTROL, SET_CONTROL_USE_NO_FLOW_CONTROL) > + elif suboption[2:3] == SET_CONTROL_USE_SW_FLOW_CONTROL: > + self.serial.xonxoff = True > + if self.logger: > + self.logger.info("changed flow control to XON/XOFF") > + self.rfc2217SendSubnegotiation(SERVER_SET_CONTROL, SET_CONTROL_USE_SW_FLOW_CONTROL) > + elif suboption[2:3] == SET_CONTROL_USE_HW_FLOW_CONTROL: > + self.serial.rtscts = True > + if self.logger: > + self.logger.info("changed flow control to RTS/CTS") > + self.rfc2217SendSubnegotiation(SERVER_SET_CONTROL, SET_CONTROL_USE_HW_FLOW_CONTROL) > + elif suboption[2:3] == SET_CONTROL_REQ_BREAK_STATE: > + if self.logger: > + self.logger.warning("requested break state - not implemented") > + pass # XXX needs cached value > + elif suboption[2:3] == SET_CONTROL_BREAK_ON: > + self.serial.setBreak(True) > + if self.logger: > + self.logger.info("changed BREAK to active") > + self.rfc2217SendSubnegotiation(SERVER_SET_CONTROL, SET_CONTROL_BREAK_ON) > + elif suboption[2:3] == SET_CONTROL_BREAK_OFF: > + self.serial.setBreak(False) > + if self.logger: > + self.logger.info("changed BREAK to inactive") > + self.rfc2217SendSubnegotiation(SERVER_SET_CONTROL, SET_CONTROL_BREAK_OFF) > + elif suboption[2:3] == SET_CONTROL_REQ_DTR: > + if self.logger: > + self.logger.warning("requested DTR state - not implemented") > + pass # XXX needs cached value > + elif suboption[2:3] == SET_CONTROL_DTR_ON: > + self.serial.setDTR(True) > + if self.logger: > + self.logger.info("changed DTR to active") > + self.rfc2217SendSubnegotiation(SERVER_SET_CONTROL, SET_CONTROL_DTR_ON) > + elif suboption[2:3] == SET_CONTROL_DTR_OFF: > + self.serial.setDTR(False) > + if self.logger: > + self.logger.info("changed DTR to inactive") > + self.rfc2217SendSubnegotiation(SERVER_SET_CONTROL, SET_CONTROL_DTR_OFF) > + elif suboption[2:3] == SET_CONTROL_REQ_RTS: > + if self.logger: > + self.logger.warning("requested RTS state - not implemented") > + pass # XXX needs cached value > + #~ self.rfc2217SendSubnegotiation(SERVER_SET_CONTROL, SET_CONTROL_RTS_ON) > + elif suboption[2:3] == SET_CONTROL_RTS_ON: > + self.serial.setRTS(True) > + if self.logger: > + self.logger.info("changed RTS to active") > + self.rfc2217SendSubnegotiation(SERVER_SET_CONTROL, SET_CONTROL_RTS_ON) > + elif suboption[2:3] == SET_CONTROL_RTS_OFF: > + self.serial.setRTS(False) > + if self.logger: > + self.logger.info("changed RTS to inactive") > + self.rfc2217SendSubnegotiation(SERVER_SET_CONTROL, SET_CONTROL_RTS_OFF) > + #~ elif suboption[2:3] == SET_CONTROL_REQ_FLOW_SETTING_IN: > + #~ elif suboption[2:3] == SET_CONTROL_USE_NO_FLOW_CONTROL_IN: > + #~ elif suboption[2:3] == SET_CONTROL_USE_SW_FLOW_CONTOL_IN: > + #~ elif suboption[2:3] == SET_CONTROL_USE_HW_FLOW_CONTOL_IN: > + #~ elif suboption[2:3] == SET_CONTROL_USE_DCD_FLOW_CONTROL: > + #~ elif suboption[2:3] == SET_CONTROL_USE_DTR_FLOW_CONTROL: > + #~ elif suboption[2:3] == SET_CONTROL_USE_DSR_FLOW_CONTROL: > + elif suboption[1:2] == NOTIFY_LINESTATE: > + # client polls for current state > + self.rfc2217SendSubnegotiation( > + SERVER_NOTIFY_LINESTATE, > + to_bytes([0]) # sorry, nothing like that implemented > + ) > + elif suboption[1:2] == NOTIFY_MODEMSTATE: > + if self.logger: > + self.logger.info("request for modem state") > + # client polls for current state > + self.check_modem_lines(force_notification=True) > + elif suboption[1:2] == FLOWCONTROL_SUSPEND: > + if self.logger: > + self.logger.info("suspend") > + self._remote_suspend_flow = True > + elif suboption[1:2] == FLOWCONTROL_RESUME: > + if self.logger: > + self.logger.info("resume") > + self._remote_suspend_flow = False > + elif suboption[1:2] == SET_LINESTATE_MASK: > + self.linstate_mask = ord(suboption[2:3]) # ensure it is a number > + if self.logger: > + self.logger.info("line state mask: 0x%02x" % (self.linstate_mask,)) > + elif suboption[1:2] == SET_MODEMSTATE_MASK: > + self.modemstate_mask = ord(suboption[2:3]) # ensure it is a number > + if self.logger: > + self.logger.info("modem state mask: 0x%02x" % (self.modemstate_mask,)) > + elif suboption[1:2] == PURGE_DATA: > + if suboption[2:3] == PURGE_RECEIVE_BUFFER: > + self.serial.flushInput() > + if self.logger: > + self.logger.info("purge in") > + self.rfc2217SendSubnegotiation(SERVER_PURGE_DATA, PURGE_RECEIVE_BUFFER) > + elif suboption[2:3] == PURGE_TRANSMIT_BUFFER: > + self.serial.flushOutput() > + if self.logger: > + self.logger.info("purge out") > + self.rfc2217SendSubnegotiation(SERVER_PURGE_DATA, PURGE_TRANSMIT_BUFFER) > + elif suboption[2:3] == PURGE_BOTH_BUFFERS: > + self.serial.flushInput() > + self.serial.flushOutput() > + if self.logger: > + self.logger.info("purge both") > + self.rfc2217SendSubnegotiation(SERVER_PURGE_DATA, PURGE_BOTH_BUFFERS) > + else: > + if self.logger: > + self.logger.error("undefined PURGE_DATA: %r" % list(suboption[2:])) > + else: > + if self.logger: > + self.logger.error("undefined COM_PORT_OPTION: %r" % list(suboption[1:])) > + else: > + if self.logger: > + self.logger.warning("unknown subnegotiation: %r" % (suboption,)) > + > + > +# simple client test > +if __name__ == '__main__': > + import sys > + s = Serial('rfc2217://localhost:7000', 115200) > + sys.stdout.write('%s\n' % s) > + > + #~ s.baudrate = 1898 > + > + sys.stdout.write("write...\n") > + s.write("hello\n") > + s.flush() > + sys.stdout.write("read: %s\n" % s.read(5)) > + > + #~ s.baudrate = 19200 > + #~ s.databits = 7 > + s.close() > diff --git a/scripts/serial/serialcli.py b/scripts/serial/serialcli.py > new file mode 100644 > index 0000000..9ab3876 > --- /dev/null > +++ b/scripts/serial/serialcli.py > @@ -0,0 +1,284 @@ > +#! python > +# Python Serial Port Extension for Win32, Linux, BSD, Jython and .NET/Mono > +# serial driver for .NET/Mono (IronPython), .NET >= 2 > +# see __init__.py > +# > +# (C) 2008 Chris Liechti > +# this is distributed under a free software license, see license.txt > + > +import clr > +import System > +import System.IO.Ports > +from serial.serialutil import * > + > + > +def device(portnum): > + """Turn a port number into a device name""" > + return System.IO.Ports.SerialPort.GetPortNames()[portnum] > + > + > +# must invoke function with byte array, make a helper to convert strings > +# to byte arrays > +sab = System.Array[System.Byte] > +def as_byte_array(string): > + return sab([ord(x) for x in string]) # XXX will require adaption when run with a 3.x compatible IronPython > + > +class IronSerial(SerialBase): > + """Serial port implementation for .NET/Mono.""" > + > + BAUDRATES = (50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, > + 9600, 19200, 38400, 57600, 115200) > + > + def open(self): > + """\ > + Open port with current settings. This may throw a SerialException > + if the port cannot be opened. > + """ > + if self._port is None: > + raise SerialException("Port must be configured before it can be used.") > + if self._isOpen: > + raise SerialException("Port is already open.") > + try: > + self._port_handle = System.IO.Ports.SerialPort(self.portstr) > + except Exception, msg: > + self._port_handle = None > + raise SerialException("could not open port %s: %s" % (self.portstr, msg)) > + > + self._reconfigurePort() > + self._port_handle.Open() > + self._isOpen = True > + if not self._rtscts: > + self.setRTS(True) > + self.setDTR(True) > + self.flushInput() > + self.flushOutput() > + > + def _reconfigurePort(self): > + """Set communication parameters on opened port.""" > + if not self._port_handle: > + raise SerialException("Can only operate on a valid port handle") > + > + #~ self._port_handle.ReceivedBytesThreshold = 1 > + > + if self._timeout is None: > + self._port_handle.ReadTimeout = System.IO.Ports.SerialPort.InfiniteTimeout > + else: > + self._port_handle.ReadTimeout = int(self._timeout*1000) > + > + # if self._timeout != 0 and self._interCharTimeout is not None: > + # timeouts = (int(self._interCharTimeout * 1000),) + timeouts[1:] > + > + if self._writeTimeout is None: > + self._port_handle.WriteTimeout = System.IO.Ports.SerialPort.InfiniteTimeout > + else: > + self._port_handle.WriteTimeout = int(self._writeTimeout*1000) > + > + > + # Setup the connection info. > + try: > + self._port_handle.BaudRate = self._baudrate > + except IOError, e: > + # catch errors from illegal baudrate settings > + raise ValueError(str(e)) > + > + if self._bytesize == FIVEBITS: > + self._port_handle.DataBits = 5 > + elif self._bytesize == SIXBITS: > + self._port_handle.DataBits = 6 > + elif self._bytesize == SEVENBITS: > + self._port_handle.DataBits = 7 > + elif self._bytesize == EIGHTBITS: > + self._port_handle.DataBits = 8 > + else: > + raise ValueError("Unsupported number of data bits: %r" % self._bytesize) > + > + if self._parity == PARITY_NONE: > + self._port_handle.Parity = getattr(System.IO.Ports.Parity, 'None') # reserved keyword in Py3k > + elif self._parity == PARITY_EVEN: > + self._port_handle.Parity = System.IO.Ports.Parity.Even > + elif self._parity == PARITY_ODD: > + self._port_handle.Parity = System.IO.Ports.Parity.Odd > + elif self._parity == PARITY_MARK: > + self._port_handle.Parity = System.IO.Ports.Parity.Mark > + elif self._parity == PARITY_SPACE: > + self._port_handle.Parity = System.IO.Ports.Parity.Space > + else: > + raise ValueError("Unsupported parity mode: %r" % self._parity) > + > + if self._stopbits == STOPBITS_ONE: > + self._port_handle.StopBits = System.IO.Ports.StopBits.One > + elif self._stopbits == STOPBITS_ONE_POINT_FIVE: > + self._port_handle.StopBits = System.IO.Ports.StopBits.OnePointFive > + elif self._stopbits == STOPBITS_TWO: > + self._port_handle.StopBits = System.IO.Ports.StopBits.Two > + else: > + raise ValueError("Unsupported number of stop bits: %r" % self._stopbits) > + > + if self._rtscts and self._xonxoff: > + self._port_handle.Handshake = System.IO.Ports.Handshake.RequestToSendXOnXOff > + elif self._rtscts: > + self._port_handle.Handshake = System.IO.Ports.Handshake.RequestToSend > + elif self._xonxoff: > + self._port_handle.Handshake = System.IO.Ports.Handshake.XOnXOff > + else: > + self._port_handle.Handshake = getattr(System.IO.Ports.Handshake, 'None') # reserved keyword in Py3k > + > + #~ def __del__(self): > + #~ self.close() > + > + def close(self): > + """Close port""" > + if self._isOpen: > + if self._port_handle: > + try: > + self._port_handle.Close() > + except System.IO.Ports.InvalidOperationException: > + # ignore errors. can happen for unplugged USB serial devices > + pass > + self._port_handle = None > + self._isOpen = False > + > + def makeDeviceName(self, port): > + try: > + return device(port) > + except TypeError, e: > + raise SerialException(str(e)) > + > + # - - - - - - - - - - - - - - - - - - - - - - - - > + > + def inWaiting(self): > + """Return the number of characters currently in the input buffer.""" > + if not self._port_handle: raise portNotOpenError > + return self._port_handle.BytesToRead > + > + def read(self, size=1): > + """\ > + Read size bytes from the serial port. If a timeout is set it may > + return less characters as requested. With no timeout it will block > + until the requested number of bytes is read. > + """ > + if not self._port_handle: raise portNotOpenError > + # must use single byte reads as this is the only way to read > + # without applying encodings > + data = bytearray() > + while size: > + try: > + data.append(self._port_handle.ReadByte()) > + except System.TimeoutException, e: > + break > + else: > + size -= 1 > + return bytes(data) > + > + def write(self, data): > + """Output the given string over the serial port.""" > + if not self._port_handle: raise portNotOpenError > + #~ if not isinstance(data, (bytes, bytearray)): > + #~ raise TypeError('expected %s or bytearray, got %s' % (bytes, type(data))) > + try: > + # must call overloaded method with byte array argument > + # as this is the only one not applying encodings > + self._port_handle.Write(as_byte_array(data), 0, len(data)) > + except System.TimeoutException, e: > + raise writeTimeoutError > + return len(data) > + > + def flushInput(self): > + """Clear input buffer, discarding all that is in the buffer.""" > + if not self._port_handle: raise portNotOpenError > + self._port_handle.DiscardInBuffer() > + > + def flushOutput(self): > + """\ > + Clear output buffer, aborting the current output and > + discarding all that is in the buffer. > + """ > + if not self._port_handle: raise portNotOpenError > + self._port_handle.DiscardOutBuffer() > + > + def sendBreak(self, duration=0.25): > + """\ > + Send break condition. Timed, returns to idle state after given > + duration. > + """ > + if not self._port_handle: raise portNotOpenError > + import time > + self._port_handle.BreakState = True > + time.sleep(duration) > + self._port_handle.BreakState = False > + > + def setBreak(self, level=True): > + """ > + Set break: Controls TXD. When active, to transmitting is possible. > + """ > + if not self._port_handle: raise portNotOpenError > + self._port_handle.BreakState = bool(level) > + > + def setRTS(self, level=True): > + """Set terminal status line: Request To Send""" > + if not self._port_handle: raise portNotOpenError > + self._port_handle.RtsEnable = bool(level) > + > + def setDTR(self, level=True): > + """Set terminal status line: Data Terminal Ready""" > + if not self._port_handle: raise portNotOpenError > + self._port_handle.DtrEnable = bool(level) > + > + def getCTS(self): > + """Read terminal status line: Clear To Send""" > + if not self._port_handle: raise portNotOpenError > + return self._port_handle.CtsHolding > + > + def getDSR(self): > + """Read terminal status line: Data Set Ready""" > + if not self._port_handle: raise portNotOpenError > + return self._port_handle.DsrHolding > + > + def getRI(self): > + """Read terminal status line: Ring Indicator""" > + if not self._port_handle: raise portNotOpenError > + #~ return self._port_handle.XXX > + return False #XXX an error would be better > + > + def getCD(self): > + """Read terminal status line: Carrier Detect""" > + if not self._port_handle: raise portNotOpenError > + return self._port_handle.CDHolding > + > + # - - platform specific - - - - > + # none > + > + > +# assemble Serial class with the platform specific implementation and the base > +# for file-like behavior. for Python 2.6 and newer, that provide the new I/O > +# library, derive from io.RawIOBase > +try: > + import io > +except ImportError: > + # classic version with our own file-like emulation > + class Serial(IronSerial, FileLike): > + pass > +else: > + # io library present > + class Serial(IronSerial, io.RawIOBase): > + pass > + > + > +# Nur Testfunktion!! > +if __name__ == '__main__': > + import sys > + > + s = Serial(0) > + sys.stdio.write('%s\n' % s) > + > + s = Serial() > + sys.stdio.write('%s\n' % s) > + > + > + s.baudrate = 19200 > + s.databits = 7 > + s.close() > + s.port = 0 > + s.open() > + sys.stdio.write('%s\n' % s) > + > diff --git a/scripts/serial/serialposix.py b/scripts/serial/serialposix.py > new file mode 100644 > index 0000000..359ad1b > --- /dev/null > +++ b/scripts/serial/serialposix.py > @@ -0,0 +1,730 @@ > +#!/usr/bin/env python > +# > +# Python Serial Port Extension for Win32, Linux, BSD, Jython > +# module for serial IO for POSIX compatible systems, like Linux > +# see __init__.py > +# > +# (C) 2001-2010 Chris Liechti > +# this is distributed under a free software license, see license.txt > +# > +# parts based on code from Grant B. Edwards : > +# ftp://ftp.visi.com/users/grante/python/PosixSerial.py > +# > +# references: http://www.easysw.com/~mike/serial/serial.html > + > +import sys, os, fcntl, termios, struct, select, errno, time > +from serial.serialutil import * > + > +# Do check the Python version as some constants have moved. > +if (sys.hexversion < 0x020100f0): > + import TERMIOS > +else: > + TERMIOS = termios > + > +if (sys.hexversion < 0x020200f0): > + import FCNTL > +else: > + FCNTL = fcntl > + > +# try to detect the OS so that a device can be selected... > +# this code block should supply a device() and set_special_baudrate() function > +# for the platform > +plat = sys.platform.lower() > + > +if plat[:5] == 'linux': # Linux (confirmed) > + > + def device(port): > + return '/dev/ttyS%d' % port > + > + TCGETS2 = 0x802C542A > + TCSETS2 = 0x402C542B > + BOTHER = 0o010000 > + > + def set_special_baudrate(port, baudrate): > + # right size is 44 on x86_64, allow for some growth > + import array > + buf = array.array('i', [0] * 64) > + > + try: > + # get serial_struct > + FCNTL.ioctl(port.fd, TCGETS2, buf) > + # set custom speed > + buf[2] &= ~TERMIOS.CBAUD > + buf[2] |= BOTHER > + buf[9] = buf[10] = baudrate > + > + # set serial_struct > + res = FCNTL.ioctl(port.fd, TCSETS2, buf) > + except IOError, e: > + raise ValueError('Failed to set custom baud rate (%s): %s' % (baudrate, e)) > + > + baudrate_constants = { > + 0: 0000000, # hang up > + 50: 0000001, > + 75: 0000002, > + 110: 0000003, > + 134: 0000004, > + 150: 0000005, > + 200: 0000006, > + 300: 0000007, > + 600: 0000010, > + 1200: 0000011, > + 1800: 0000012, > + 2400: 0000013, > + 4800: 0000014, > + 9600: 0000015, > + 19200: 0000016, > + 38400: 0000017, > + 57600: 0010001, > + 115200: 0010002, > + 230400: 0010003, > + 460800: 0010004, > + 500000: 0010005, > + 576000: 0010006, > + 921600: 0010007, > + 1000000: 0010010, > + 1152000: 0010011, > + 1500000: 0010012, > + 2000000: 0010013, > + 2500000: 0010014, > + 3000000: 0010015, > + 3500000: 0010016, > + 4000000: 0010017 > + } > + > +elif plat == 'cygwin': # cygwin/win32 (confirmed) > + > + def device(port): > + return '/dev/com%d' % (port + 1) > + > + def set_special_baudrate(port, baudrate): > + raise ValueError("sorry don't know how to handle non standard baud rate on this platform") > + > + baudrate_constants = { > + 128000: 0x01003, > + 256000: 0x01005, > + 500000: 0x01007, > + 576000: 0x01008, > + 921600: 0x01009, > + 1000000: 0x0100a, > + 1152000: 0x0100b, > + 1500000: 0x0100c, > + 2000000: 0x0100d, > + 2500000: 0x0100e, > + 3000000: 0x0100f > + } > + > +elif plat[:7] == 'openbsd': # OpenBSD > + > + def device(port): > + return '/dev/cua%02d' % port > + > + def set_special_baudrate(port, baudrate): > + raise ValueError("sorry don't know how to handle non standard baud rate on this platform") > + > + baudrate_constants = {} > + > +elif plat[:3] == 'bsd' or \ > + plat[:7] == 'freebsd': > + > + def device(port): > + return '/dev/cuad%d' % port > + > + def set_special_baudrate(port, baudrate): > + raise ValueError("sorry don't know how to handle non standard baud rate on this platform") > + > + baudrate_constants = {} > + > +elif plat[:6] == 'darwin': # OS X > + > + version = os.uname()[2].split('.') > + # Tiger or above can support arbitrary serial speeds > + if int(version[0]) >= 8: > + def set_special_baudrate(port, baudrate): > + # use IOKit-specific call to set up high speeds > + import array, fcntl > + buf = array.array('i', [baudrate]) > + IOSSIOSPEED = 0x80045402 #_IOW('T', 2, speed_t) > + fcntl.ioctl(port.fd, IOSSIOSPEED, buf, 1) > + else: # version < 8 > + def set_special_baudrate(port, baudrate): > + raise ValueError("baud rate not supported") > + > + def device(port): > + return '/dev/cuad%d' % port > + > + baudrate_constants = {} > + > + > +elif plat[:6] == 'netbsd': # NetBSD 1.6 testing by Erk > + > + def device(port): > + return '/dev/dty%02d' % port > + > + def set_special_baudrate(port, baudrate): > + raise ValueError("sorry don't know how to handle non standard baud rate on this platform") > + > + baudrate_constants = {} > + > +elif plat[:4] == 'irix': # IRIX (partially tested) > + > + def device(port): > + return '/dev/ttyf%d' % (port+1) #XXX different device names depending on flow control > + > + def set_special_baudrate(port, baudrate): > + raise ValueError("sorry don't know how to handle non standard baud rate on this platform") > + > + baudrate_constants = {} > + > +elif plat[:2] == 'hp': # HP-UX (not tested) > + > + def device(port): > + return '/dev/tty%dp0' % (port+1) > + > + def set_special_baudrate(port, baudrate): > + raise ValueError("sorry don't know how to handle non standard baud rate on this platform") > + > + baudrate_constants = {} > + > +elif plat[:5] == 'sunos': # Solaris/SunOS (confirmed) > + > + def device(port): > + return '/dev/tty%c' % (ord('a')+port) > + > + def set_special_baudrate(port, baudrate): > + raise ValueError("sorry don't know how to handle non standard baud rate on this platform") > + > + baudrate_constants = {} > + > +elif plat[:3] == 'aix': # AIX > + > + def device(port): > + return '/dev/tty%d' % (port) > + > + def set_special_baudrate(port, baudrate): > + raise ValueError("sorry don't know how to handle non standard baud rate on this platform") > + > + baudrate_constants = {} > + > +else: > + # platform detection has failed... > + sys.stderr.write("""\ > +don't know how to number ttys on this system. > +! Use an explicit path (eg /dev/ttyS1) or send this information to > +! the author of this module: > + > +sys.platform = %r > +os.name = %r > +serialposix.py version = %s > + > +also add the device name of the serial port and where the > +counting starts for the first serial port. > +e.g. 'first serial port: /dev/ttyS0' > +and with a bit luck you can get this module running... > +""" % (sys.platform, os.name, VERSION)) > + # no exception, just continue with a brave attempt to build a device name > + # even if the device name is not correct for the platform it has chances > + # to work using a string with the real device name as port parameter. > + def device(portum): > + return '/dev/ttyS%d' % portnum > + def set_special_baudrate(port, baudrate): > + raise SerialException("sorry don't know how to handle non standard baud rate on this platform") > + baudrate_constants = {} > + #~ raise Exception, "this module does not run on this platform, sorry." > + > +# whats up with "aix", "beos", .... > +# they should work, just need to know the device names. > + > + > +# load some constants for later use. > +# try to use values from TERMIOS, use defaults from linux otherwise > +TIOCMGET = hasattr(TERMIOS, 'TIOCMGET') and TERMIOS.TIOCMGET or 0x5415 > +TIOCMBIS = hasattr(TERMIOS, 'TIOCMBIS') and TERMIOS.TIOCMBIS or 0x5416 > +TIOCMBIC = hasattr(TERMIOS, 'TIOCMBIC') and TERMIOS.TIOCMBIC or 0x5417 > +TIOCMSET = hasattr(TERMIOS, 'TIOCMSET') and TERMIOS.TIOCMSET or 0x5418 > + > +#TIOCM_LE = hasattr(TERMIOS, 'TIOCM_LE') and TERMIOS.TIOCM_LE or 0x001 > +TIOCM_DTR = hasattr(TERMIOS, 'TIOCM_DTR') and TERMIOS.TIOCM_DTR or 0x002 > +TIOCM_RTS = hasattr(TERMIOS, 'TIOCM_RTS') and TERMIOS.TIOCM_RTS or 0x004 > +#TIOCM_ST = hasattr(TERMIOS, 'TIOCM_ST') and TERMIOS.TIOCM_ST or 0x008 > +#TIOCM_SR = hasattr(TERMIOS, 'TIOCM_SR') and TERMIOS.TIOCM_SR or 0x010 > + > +TIOCM_CTS = hasattr(TERMIOS, 'TIOCM_CTS') and TERMIOS.TIOCM_CTS or 0x020 > +TIOCM_CAR = hasattr(TERMIOS, 'TIOCM_CAR') and TERMIOS.TIOCM_CAR or 0x040 > +TIOCM_RNG = hasattr(TERMIOS, 'TIOCM_RNG') and TERMIOS.TIOCM_RNG or 0x080 > +TIOCM_DSR = hasattr(TERMIOS, 'TIOCM_DSR') and TERMIOS.TIOCM_DSR or 0x100 > +TIOCM_CD = hasattr(TERMIOS, 'TIOCM_CD') and TERMIOS.TIOCM_CD or TIOCM_CAR > +TIOCM_RI = hasattr(TERMIOS, 'TIOCM_RI') and TERMIOS.TIOCM_RI or TIOCM_RNG > +#TIOCM_OUT1 = hasattr(TERMIOS, 'TIOCM_OUT1') and TERMIOS.TIOCM_OUT1 or 0x2000 > +#TIOCM_OUT2 = hasattr(TERMIOS, 'TIOCM_OUT2') and TERMIOS.TIOCM_OUT2 or 0x4000 > +if hasattr(TERMIOS, 'TIOCINQ'): > + TIOCINQ = TERMIOS.TIOCINQ > +else: > + TIOCINQ = hasattr(TERMIOS, 'FIONREAD') and TERMIOS.FIONREAD or 0x541B > +TIOCOUTQ = hasattr(TERMIOS, 'TIOCOUTQ') and TERMIOS.TIOCOUTQ or 0x5411 > + > +TIOCM_zero_str = struct.pack('I', 0) > +TIOCM_RTS_str = struct.pack('I', TIOCM_RTS) > +TIOCM_DTR_str = struct.pack('I', TIOCM_DTR) > + > +TIOCSBRK = hasattr(TERMIOS, 'TIOCSBRK') and TERMIOS.TIOCSBRK or 0x5427 > +TIOCCBRK = hasattr(TERMIOS, 'TIOCCBRK') and TERMIOS.TIOCCBRK or 0x5428 > + > +CMSPAR = 010000000000 # Use "stick" (mark/space) parity > + > + > +class PosixSerial(SerialBase): > + """\ > + Serial port class POSIX implementation. Serial port configuration is > + done with termios and fcntl. Runs on Linux and many other Un*x like > + systems. > + """ > + > + def open(self): > + """\ > + Open port with current settings. This may throw a SerialException > + if the port cannot be opened.""" > + if self._port is None: > + raise SerialException("Port must be configured before it can be used.") > + if self._isOpen: > + raise SerialException("Port is already open.") > + self.fd = None > + # open > + try: > + self.fd = os.open(self.portstr, os.O_RDWR|os.O_NOCTTY|os.O_NONBLOCK) > + except OSError, msg: > + self.fd = None > + raise SerialException(msg.errno, "could not open port %s: %s" % (self._port, msg)) > + #~ fcntl.fcntl(self.fd, FCNTL.F_SETFL, 0) # set blocking > + > + try: > + self._reconfigurePort() > + except: > + try: > + os.close(self.fd) > + except: > + # ignore any exception when closing the port > + # also to keep original exception that happened when setting up > + pass > + self.fd = None > + raise > + else: > + self._isOpen = True > + self.flushInput() > + > + > + def _reconfigurePort(self): > + """Set communication parameters on opened port.""" > + if self.fd is None: > + raise SerialException("Can only operate on a valid file descriptor") > + custom_baud = None > + > + vmin = vtime = 0 # timeout is done via select > + if self._interCharTimeout is not None: > + vmin = 1 > + vtime = int(self._interCharTimeout * 10) > + try: > + orig_attr = termios.tcgetattr(self.fd) > + iflag, oflag, cflag, lflag, ispeed, ospeed, cc = orig_attr > + except termios.error, msg: # if a port is nonexistent but has a /dev file, it'll fail here > + raise SerialException("Could not configure port: %s" % msg) > + # set up raw mode / no echo / binary > + cflag |= (TERMIOS.CLOCAL|TERMIOS.CREAD) > + lflag &= ~(TERMIOS.ICANON|TERMIOS.ECHO|TERMIOS.ECHOE|TERMIOS.ECHOK|TERMIOS.ECHONL| > + TERMIOS.ISIG|TERMIOS.IEXTEN) #|TERMIOS.ECHOPRT > + for flag in ('ECHOCTL', 'ECHOKE'): # netbsd workaround for Erk > + if hasattr(TERMIOS, flag): > + lflag &= ~getattr(TERMIOS, flag) > + > + oflag &= ~(TERMIOS.OPOST) > + iflag &= ~(TERMIOS.INLCR|TERMIOS.IGNCR|TERMIOS.ICRNL|TERMIOS.IGNBRK) > + if hasattr(TERMIOS, 'IUCLC'): > + iflag &= ~TERMIOS.IUCLC > + if hasattr(TERMIOS, 'PARMRK'): > + iflag &= ~TERMIOS.PARMRK > + > + # setup baud rate > + try: > + ispeed = ospeed = getattr(TERMIOS, 'B%s' % (self._baudrate)) > + except AttributeError: > + try: > + ispeed = ospeed = baudrate_constants[self._baudrate] > + except KeyError: > + #~ raise ValueError('Invalid baud rate: %r' % self._baudrate) > + # may need custom baud rate, it isn't in our list. > + ispeed = ospeed = getattr(TERMIOS, 'B38400') > + try: > + custom_baud = int(self._baudrate) # store for later > + except ValueError: > + raise ValueError('Invalid baud rate: %r' % self._baudrate) > + else: > + if custom_baud < 0: > + raise ValueError('Invalid baud rate: %r' % self._baudrate) > + > + # setup char len > + cflag &= ~TERMIOS.CSIZE > + if self._bytesize == 8: > + cflag |= TERMIOS.CS8 > + elif self._bytesize == 7: > + cflag |= TERMIOS.CS7 > + elif self._bytesize == 6: > + cflag |= TERMIOS.CS6 > + elif self._bytesize == 5: > + cflag |= TERMIOS.CS5 > + else: > + raise ValueError('Invalid char len: %r' % self._bytesize) > + # setup stop bits > + if self._stopbits == STOPBITS_ONE: > + cflag &= ~(TERMIOS.CSTOPB) > + elif self._stopbits == STOPBITS_ONE_POINT_FIVE: > + cflag |= (TERMIOS.CSTOPB) # XXX same as TWO.. there is no POSIX support for 1.5 > + elif self._stopbits == STOPBITS_TWO: > + cflag |= (TERMIOS.CSTOPB) > + else: > + raise ValueError('Invalid stop bit specification: %r' % self._stopbits) > + # setup parity > + iflag &= ~(TERMIOS.INPCK|TERMIOS.ISTRIP) > + if self._parity == PARITY_NONE: > + cflag &= ~(TERMIOS.PARENB|TERMIOS.PARODD) > + elif self._parity == PARITY_EVEN: > + cflag &= ~(TERMIOS.PARODD) > + cflag |= (TERMIOS.PARENB) > + elif self._parity == PARITY_ODD: > + cflag |= (TERMIOS.PARENB|TERMIOS.PARODD) > + elif self._parity == PARITY_MARK and plat[:5] == 'linux': > + cflag |= (TERMIOS.PARENB|CMSPAR|TERMIOS.PARODD) > + elif self._parity == PARITY_SPACE and plat[:5] == 'linux': > + cflag |= (TERMIOS.PARENB|CMSPAR) > + cflag &= ~(TERMIOS.PARODD) > + else: > + raise ValueError('Invalid parity: %r' % self._parity) > + # setup flow control > + # xonxoff > + if hasattr(TERMIOS, 'IXANY'): > + if self._xonxoff: > + iflag |= (TERMIOS.IXON|TERMIOS.IXOFF) #|TERMIOS.IXANY) > + else: > + iflag &= ~(TERMIOS.IXON|TERMIOS.IXOFF|TERMIOS.IXANY) > + else: > + if self._xonxoff: > + iflag |= (TERMIOS.IXON|TERMIOS.IXOFF) > + else: > + iflag &= ~(TERMIOS.IXON|TERMIOS.IXOFF) > + # rtscts > + if hasattr(TERMIOS, 'CRTSCTS'): > + if self._rtscts: > + cflag |= (TERMIOS.CRTSCTS) > + else: > + cflag &= ~(TERMIOS.CRTSCTS) > + elif hasattr(TERMIOS, 'CNEW_RTSCTS'): # try it with alternate constant name > + if self._rtscts: > + cflag |= (TERMIOS.CNEW_RTSCTS) > + else: > + cflag &= ~(TERMIOS.CNEW_RTSCTS) > + # XXX should there be a warning if setting up rtscts (and xonxoff etc) fails?? > + > + # buffer > + # vmin "minimal number of characters to be read. 0 for non blocking" > + if vmin < 0 or vmin > 255: > + raise ValueError('Invalid vmin: %r ' % vmin) > + cc[TERMIOS.VMIN] = vmin > + # vtime > + if vtime < 0 or vtime > 255: > + raise ValueError('Invalid vtime: %r' % vtime) > + cc[TERMIOS.VTIME] = vtime > + # activate settings > + if [iflag, oflag, cflag, lflag, ispeed, ospeed, cc] != orig_attr: > + termios.tcsetattr(self.fd, TERMIOS.TCSANOW, [iflag, oflag, cflag, lflag, ispeed, ospeed, cc]) > + > + # apply custom baud rate, if any > + if custom_baud is not None: > + set_special_baudrate(self, custom_baud) > + > + def close(self): > + """Close port""" > + if self._isOpen: > + if self.fd is not None: > + os.close(self.fd) > + self.fd = None > + self._isOpen = False > + > + def makeDeviceName(self, port): > + return device(port) > + > + # - - - - - - - - - - - - - - - - - - - - - - - - > + > + def inWaiting(self): > + """Return the number of characters currently in the input buffer.""" > + #~ s = fcntl.ioctl(self.fd, TERMIOS.FIONREAD, TIOCM_zero_str) > + s = fcntl.ioctl(self.fd, TIOCINQ, TIOCM_zero_str) > + return struct.unpack('I',s)[0] > + > + # select based implementation, proved to work on many systems > + def read(self, size=1): > + """\ > + Read size bytes from the serial port. If a timeout is set it may > + return less characters as requested. With no timeout it will block > + until the requested number of bytes is read. > + """ > + if not self._isOpen: raise portNotOpenError > + read = bytearray() > + while len(read) < size: > + try: > + ready,_,_ = select.select([self.fd],[],[], self._timeout) > + # If select was used with a timeout, and the timeout occurs, it > + # returns with empty lists -> thus abort read operation. > + # For timeout == 0 (non-blocking operation) also abort when there > + # is nothing to read. > + if not ready: > + break # timeout > + buf = os.read(self.fd, size-len(read)) > + # read should always return some data as select reported it was > + # ready to read when we get to this point. > + if not buf: > + # Disconnected devices, at least on Linux, show the > + # behavior that they are always ready to read immediately > + # but reading returns nothing. > + raise SerialException('device reports readiness to read but returned no data (device disconnected or multiple access on port?)') > + read.extend(buf) > + except OSError, e: > + # this is for Python 3.x where select.error is a subclass of OSError > + # ignore EAGAIN errors. all other errors are shown > + if e.errno != errno.EAGAIN: > + raise SerialException('read failed: %s' % (e,)) > + except select.error, e: > + # this is for Python 2.x > + # ignore EAGAIN errors. all other errors are shown > + # see also http://www.python.org/dev/peps/pep-3151/#select > + if e[0] != errno.EAGAIN: > + raise SerialException('read failed: %s' % (e,)) > + return bytes(read) > + > + def write(self, data): > + """Output the given string over the serial port.""" > + if not self._isOpen: raise portNotOpenError > + d = to_bytes(data) > + tx_len = len(d) > + if self._writeTimeout is not None and self._writeTimeout > 0: > + timeout = time.time() + self._writeTimeout > + else: > + timeout = None > + while tx_len > 0: > + try: > + n = os.write(self.fd, d) > + if timeout: > + # when timeout is set, use select to wait for being ready > + # with the time left as timeout > + timeleft = timeout - time.time() > + if timeleft < 0: > + raise writeTimeoutError > + _, ready, _ = select.select([], [self.fd], [], timeleft) > + if not ready: > + raise writeTimeoutError > + else: > + # wait for write operation > + _, ready, _ = select.select([], [self.fd], [], None) > + if not ready: > + raise SerialException('write failed (select)') > + d = d[n:] > + tx_len -= n > + except OSError, v: > + if v.errno != errno.EAGAIN: > + raise SerialException('write failed: %s' % (v,)) > + return len(data) > + > + def flush(self): > + """\ > + Flush of file like objects. In this case, wait until all data > + is written. > + """ > + self.drainOutput() > + > + def flushInput(self): > + """Clear input buffer, discarding all that is in the buffer.""" > + if not self._isOpen: raise portNotOpenError > + termios.tcflush(self.fd, TERMIOS.TCIFLUSH) > + > + def flushOutput(self): > + """\ > + Clear output buffer, aborting the current output and discarding all > + that is in the buffer. > + """ > + if not self._isOpen: raise portNotOpenError > + termios.tcflush(self.fd, TERMIOS.TCOFLUSH) > + > + def sendBreak(self, duration=0.25): > + """\ > + Send break condition. Timed, returns to idle state after given > + duration. > + """ > + if not self._isOpen: raise portNotOpenError > + termios.tcsendbreak(self.fd, int(duration/0.25)) > + > + def setBreak(self, level=1): > + """\ > + Set break: Controls TXD. When active, no transmitting is possible. > + """ > + if self.fd is None: raise portNotOpenError > + if level: > + fcntl.ioctl(self.fd, TIOCSBRK) > + else: > + fcntl.ioctl(self.fd, TIOCCBRK) > + > + def setRTS(self, level=1): > + """Set terminal status line: Request To Send""" > + if not self._isOpen: raise portNotOpenError > + if level: > + fcntl.ioctl(self.fd, TIOCMBIS, TIOCM_RTS_str) > + else: > + fcntl.ioctl(self.fd, TIOCMBIC, TIOCM_RTS_str) > + > + def setDTR(self, level=1): > + """Set terminal status line: Data Terminal Ready""" > + if not self._isOpen: raise portNotOpenError > + if level: > + fcntl.ioctl(self.fd, TIOCMBIS, TIOCM_DTR_str) > + else: > + fcntl.ioctl(self.fd, TIOCMBIC, TIOCM_DTR_str) > + > + def getCTS(self): > + """Read terminal status line: Clear To Send""" > + if not self._isOpen: raise portNotOpenError > + s = fcntl.ioctl(self.fd, TIOCMGET, TIOCM_zero_str) > + return struct.unpack('I',s)[0] & TIOCM_CTS != 0 > + > + def getDSR(self): > + """Read terminal status line: Data Set Ready""" > + if not self._isOpen: raise portNotOpenError > + s = fcntl.ioctl(self.fd, TIOCMGET, TIOCM_zero_str) > + return struct.unpack('I',s)[0] & TIOCM_DSR != 0 > + > + def getRI(self): > + """Read terminal status line: Ring Indicator""" > + if not self._isOpen: raise portNotOpenError > + s = fcntl.ioctl(self.fd, TIOCMGET, TIOCM_zero_str) > + return struct.unpack('I',s)[0] & TIOCM_RI != 0 > + > + def getCD(self): > + """Read terminal status line: Carrier Detect""" > + if not self._isOpen: raise portNotOpenError > + s = fcntl.ioctl(self.fd, TIOCMGET, TIOCM_zero_str) > + return struct.unpack('I',s)[0] & TIOCM_CD != 0 > + > + # - - platform specific - - - - > + > + def outWaiting(self): > + """Return the number of characters currently in the output buffer.""" > + #~ s = fcntl.ioctl(self.fd, TERMIOS.FIONREAD, TIOCM_zero_str) > + s = fcntl.ioctl(self.fd, TIOCOUTQ, TIOCM_zero_str) > + return struct.unpack('I',s)[0] > + > + def drainOutput(self): > + """internal - not portable!""" > + if not self._isOpen: raise portNotOpenError > + termios.tcdrain(self.fd) > + > + def nonblocking(self): > + """internal - not portable!""" > + if not self._isOpen: raise portNotOpenError > + fcntl.fcntl(self.fd, FCNTL.F_SETFL, os.O_NONBLOCK) > + > + def fileno(self): > + """\ > + For easier use of the serial port instance with select. > + WARNING: this function is not portable to different platforms! > + """ > + if not self._isOpen: raise portNotOpenError > + return self.fd > + > + def setXON(self, level=True): > + """\ > + Manually control flow - when software flow control is enabled. > + This will send XON (true) and XOFF (false) to the other device. > + WARNING: this function is not portable to different platforms! > + """ > + if not self.hComPort: raise portNotOpenError > + if enable: > + termios.tcflow(self.fd, TERMIOS.TCION) > + else: > + termios.tcflow(self.fd, TERMIOS.TCIOFF) > + > + def flowControlOut(self, enable): > + """\ > + Manually control flow of outgoing data - when hardware or software flow > + control is enabled. > + WARNING: this function is not portable to different platforms! > + """ > + if not self._isOpen: raise portNotOpenError > + if enable: > + termios.tcflow(self.fd, TERMIOS.TCOON) > + else: > + termios.tcflow(self.fd, TERMIOS.TCOOFF) > + > + > +# assemble Serial class with the platform specific implementation and the base > +# for file-like behavior. for Python 2.6 and newer, that provide the new I/O > +# library, derive from io.RawIOBase > +try: > + import io > +except ImportError: > + # classic version with our own file-like emulation > + class Serial(PosixSerial, FileLike): > + pass > +else: > + # io library present > + class Serial(PosixSerial, io.RawIOBase): > + pass > + > +class PosixPollSerial(Serial): > + """\ > + Poll based read implementation. Not all systems support poll properly. > + However this one has better handling of errors, such as a device > + disconnecting while it's in use (e.g. USB-serial unplugged). > + """ > + > + def read(self, size=1): > + """\ > + Read size bytes from the serial port. If a timeout is set it may > + return less characters as requested. With no timeout it will block > + until the requested number of bytes is read. > + """ > + if self.fd is None: raise portNotOpenError > + read = bytearray() > + poll = select.poll() > + poll.register(self.fd, select.POLLIN|select.POLLERR|select.POLLHUP|select.POLLNVAL) > + if size > 0: > + while len(read) < size: > + # print "\tread(): size",size, "have", len(read) #debug > + # wait until device becomes ready to read (or something fails) > + for fd, event in poll.poll(self._timeout*1000): > + if event & (select.POLLERR|select.POLLHUP|select.POLLNVAL): > + raise SerialException('device reports error (poll)') > + # we don't care if it is select.POLLIN or timeout, that's > + # handled below > + buf = os.read(self.fd, size - len(read)) > + read.extend(buf) > + if ((self._timeout is not None and self._timeout >= 0) or > + (self._interCharTimeout is not None and self._interCharTimeout > 0)) and not buf: > + break # early abort on timeout > + return bytes(read) > + > + > +if __name__ == '__main__': > + s = Serial(0, > + baudrate=19200, # baud rate > + bytesize=EIGHTBITS, # number of data bits > + parity=PARITY_EVEN, # enable parity checking > + stopbits=STOPBITS_ONE, # number of stop bits > + timeout=3, # set a timeout value, None for waiting forever > + xonxoff=0, # enable software flow control > + rtscts=0, # enable RTS/CTS flow control > + ) > + s.setRTS(1) > + s.setDTR(1) > + s.flushInput() > + s.flushOutput() > + s.write('hello') > + sys.stdout.write('%r\n' % s.read(5)) > + sys.stdout.write('%s\n' % s.inWaiting()) > + del s > + > diff --git a/scripts/serial/serialutil.py b/scripts/serial/serialutil.py > new file mode 100644 > index 0000000..af0d2f6 > --- /dev/null > +++ b/scripts/serial/serialutil.py > @@ -0,0 +1,572 @@ > +#! python > +# Python Serial Port Extension for Win32, Linux, BSD, Jython > +# see __init__.py > +# > +# (C) 2001-2010 Chris Liechti > +# this is distributed under a free software license, see license.txt > + > +# compatibility for older Python < 2.6 > +try: > + bytes > + bytearray > +except (NameError, AttributeError): > + # Python older than 2.6 do not have these types. Like for Python 2.6 they > + # should behave like str. For Python older than 3.0 we want to work with > + # strings anyway, only later versions have a true bytes type. > + bytes = str > + # bytearray is a mutable type that is easily turned into an instance of > + # bytes > + class bytearray(list): > + # for bytes(bytearray()) usage > + def __str__(self): return ''.join(self) > + def __repr__(self): return 'bytearray(%r)' % ''.join(self) > + # append automatically converts integers to characters > + def append(self, item): > + if isinstance(item, str): > + list.append(self, item) > + else: > + list.append(self, chr(item)) > + # += > + def __iadd__(self, other): > + for byte in other: > + self.append(byte) > + return self > + > + def __getslice__(self, i, j): > + return bytearray(list.__getslice__(self, i, j)) > + > + def __getitem__(self, item): > + if isinstance(item, slice): > + return bytearray(list.__getitem__(self, item)) > + else: > + return ord(list.__getitem__(self, item)) > + > + def __eq__(self, other): > + if isinstance(other, basestring): > + other = bytearray(other) > + return list.__eq__(self, other) > + > +# ``memoryview`` was introduced in Python 2.7 and ``bytes(some_memoryview)`` > +# isn't returning the contents (very unfortunate). Therefore we need special > +# cases and test for it. Ensure that there is a ``memoryview`` object for older > +# Python versions. This is easier than making every test dependent on its > +# existence. > +try: > + memoryview > +except (NameError, AttributeError): > + # implementation does not matter as we do not realy use it. > + # it just must not inherit from something else we might care for. > + class memoryview: > + pass > + > + > +# all Python versions prior 3.x convert ``str([17])`` to '[17]' instead of '\x11' > +# so a simple ``bytes(sequence)`` doesn't work for all versions > +def to_bytes(seq): > + """convert a sequence to a bytes type""" > + if isinstance(seq, bytes): > + return seq > + elif isinstance(seq, bytearray): > + return bytes(seq) > + elif isinstance(seq, memoryview): > + return seq.tobytes() > + else: > + b = bytearray() > + for item in seq: > + b.append(item) # this one handles int and str for our emulation and ints for Python 3.x > + return bytes(b) > + > +# create control bytes > +XON = to_bytes([17]) > +XOFF = to_bytes([19]) > + > +CR = to_bytes([13]) > +LF = to_bytes([10]) > + > + > +PARITY_NONE, PARITY_EVEN, PARITY_ODD, PARITY_MARK, PARITY_SPACE = 'N', 'E', 'O', 'M', 'S' > +STOPBITS_ONE, STOPBITS_ONE_POINT_FIVE, STOPBITS_TWO = (1, 1.5, 2) > +FIVEBITS, SIXBITS, SEVENBITS, EIGHTBITS = (5, 6, 7, 8) > + > +PARITY_NAMES = { > + PARITY_NONE: 'None', > + PARITY_EVEN: 'Even', > + PARITY_ODD: 'Odd', > + PARITY_MARK: 'Mark', > + PARITY_SPACE: 'Space', > +} > + > + > +class SerialException(IOError): > + """Base class for serial port related exceptions.""" > + > + > +class SerialTimeoutException(SerialException): > + """Write timeouts give an exception""" > + > + > +writeTimeoutError = SerialTimeoutException('Write timeout') > +portNotOpenError = SerialException('Attempting to use a port that is not open') > + > + > +class FileLike(object): > + """\ > + An abstract file like class. > + > + This class implements readline and readlines based on read and > + writelines based on write. > + This class is used to provide the above functions for to Serial > + port objects. > + > + Note that when the serial port was opened with _NO_ timeout that > + readline blocks until it sees a newline (or the specified size is > + reached) and that readlines would never return and therefore > + refuses to work (it raises an exception in this case)! > + """ > + > + def __init__(self): > + self.closed = True > + > + def close(self): > + self.closed = True > + > + # so that ports are closed when objects are discarded > + def __del__(self): > + """Destructor. Calls close().""" > + # The try/except block is in case this is called at program > + # exit time, when it's possible that globals have already been > + # deleted, and then the close() call might fail. Since > + # there's nothing we can do about such failures and they annoy > + # the end users, we suppress the traceback. > + try: > + self.close() > + except: > + pass > + > + def writelines(self, sequence): > + for line in sequence: > + self.write(line) > + > + def flush(self): > + """flush of file like objects""" > + pass > + > + # iterator for e.g. "for line in Serial(0): ..." usage > + def next(self): > + line = self.readline() > + if not line: raise StopIteration > + return line > + > + def __iter__(self): > + return self > + > + def readline(self, size=None, eol=LF): > + """\ > + Read a line which is terminated with end-of-line (eol) character > + ('\n' by default) or until timeout. > + """ > + leneol = len(eol) > + line = bytearray() > + while True: > + c = self.read(1) > + if c: > + line += c > + if line[-leneol:] == eol: > + break > + if size is not None and len(line) >= size: > + break > + else: > + break > + return bytes(line) > + > + def readlines(self, sizehint=None, eol=LF): > + """\ > + Read a list of lines, until timeout. > + sizehint is ignored. > + """ > + if self.timeout is None: > + raise ValueError("Serial port MUST have enabled timeout for this function!") > + leneol = len(eol) > + lines = [] > + while True: > + line = self.readline(eol=eol) > + if line: > + lines.append(line) > + if line[-leneol:] != eol: # was the line received with a timeout? > + break > + else: > + break > + return lines > + > + def xreadlines(self, sizehint=None): > + """\ > + Read lines, implemented as generator. It will raise StopIteration on > + timeout (empty read). sizehint is ignored. > + """ > + while True: > + line = self.readline() > + if not line: break > + yield line > + > + # other functions of file-likes - not used by pySerial > + > + #~ readinto(b) > + > + def seek(self, pos, whence=0): > + raise IOError("file is not seekable") > + > + def tell(self): > + raise IOError("file is not seekable") > + > + def truncate(self, n=None): > + raise IOError("file is not seekable") > + > + def isatty(self): > + return False > + > + > +class SerialBase(object): > + """\ > + Serial port base class. Provides __init__ function and properties to > + get/set port settings. > + """ > + > + # default values, may be overridden in subclasses that do not support all values > + BAUDRATES = (50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, > + 9600, 19200, 38400, 57600, 115200, 230400, 460800, 500000, > + 576000, 921600, 1000000, 1152000, 1500000, 2000000, 2500000, > + 3000000, 3500000, 4000000) > + BYTESIZES = (FIVEBITS, SIXBITS, SEVENBITS, EIGHTBITS) > + PARITIES = (PARITY_NONE, PARITY_EVEN, PARITY_ODD, PARITY_MARK, PARITY_SPACE) > + STOPBITS = (STOPBITS_ONE, STOPBITS_ONE_POINT_FIVE, STOPBITS_TWO) > + > + def __init__(self, > + port = None, # number of device, numbering starts at > + # zero. if everything fails, the user > + # can specify a device string, note > + # that this isn't portable anymore > + # port will be opened if one is specified > + baudrate=9600, # baud rate > + bytesize=EIGHTBITS, # number of data bits > + parity=PARITY_NONE, # enable parity checking > + stopbits=STOPBITS_ONE, # number of stop bits > + timeout=None, # set a timeout value, None to wait forever > + xonxoff=False, # enable software flow control > + rtscts=False, # enable RTS/CTS flow control > + writeTimeout=None, # set a timeout for writes > + dsrdtr=False, # None: use rtscts setting, dsrdtr override if True or False > + interCharTimeout=None # Inter-character timeout, None to disable > + ): > + """\ > + Initialize comm port object. If a port is given, then the port will be > + opened immediately. Otherwise a Serial port object in closed state > + is returned. > + """ > + > + self._isOpen = False > + self._port = None # correct value is assigned below through properties > + self._baudrate = None # correct value is assigned below through properties > + self._bytesize = None # correct value is assigned below through properties > + self._parity = None # correct value is assigned below through properties > + self._stopbits = None # correct value is assigned below through properties > + self._timeout = None # correct value is assigned below through properties > + self._writeTimeout = None # correct value is assigned below through properties > + self._xonxoff = None # correct value is assigned below through properties > + self._rtscts = None # correct value is assigned below through properties > + self._dsrdtr = None # correct value is assigned below through properties > + self._interCharTimeout = None # correct value is assigned below through properties > + > + # assign values using get/set methods using the properties feature > + self.port = port > + self.baudrate = baudrate > + self.bytesize = bytesize > + self.parity = parity > + self.stopbits = stopbits > + self.timeout = timeout > + self.writeTimeout = writeTimeout > + self.xonxoff = xonxoff > + self.rtscts = rtscts > + self.dsrdtr = dsrdtr > + self.interCharTimeout = interCharTimeout > + > + if port is not None: > + self.open() > + > + def isOpen(self): > + """Check if the port is opened.""" > + return self._isOpen > + > + # - - - - - - - - - - - - - - - - - - - - - - - - > + > + # TODO: these are not really needed as the is the BAUDRATES etc. attribute... > + # maybe i remove them before the final release... > + > + def getSupportedBaudrates(self): > + return [(str(b), b) for b in self.BAUDRATES] > + > + def getSupportedByteSizes(self): > + return [(str(b), b) for b in self.BYTESIZES] > + > + def getSupportedStopbits(self): > + return [(str(b), b) for b in self.STOPBITS] > + > + def getSupportedParities(self): > + return [(PARITY_NAMES[b], b) for b in self.PARITIES] > + > + # - - - - - - - - - - - - - - - - - - - - - - - - > + > + def setPort(self, port): > + """\ > + Change the port. The attribute portstr is set to a string that > + contains the name of the port. > + """ > + > + was_open = self._isOpen > + if was_open: self.close() > + if port is not None: > + if isinstance(port, basestring): > + self.portstr = port > + else: > + self.portstr = self.makeDeviceName(port) > + else: > + self.portstr = None > + self._port = port > + self.name = self.portstr > + if was_open: self.open() > + > + def getPort(self): > + """\ > + Get the current port setting. The value that was passed on init or using > + setPort() is passed back. See also the attribute portstr which contains > + the name of the port as a string. > + """ > + return self._port > + > + port = property(getPort, setPort, doc="Port setting") > + > + > + def setBaudrate(self, baudrate): > + """\ > + Change baud rate. It raises a ValueError if the port is open and the > + baud rate is not possible. If the port is closed, then the value is > + accepted and the exception is raised when the port is opened. > + """ > + try: > + b = int(baudrate) > + except TypeError: > + raise ValueError("Not a valid baudrate: %r" % (baudrate,)) > + else: > + if b <= 0: > + raise ValueError("Not a valid baudrate: %r" % (baudrate,)) > + self._baudrate = b > + if self._isOpen: self._reconfigurePort() > + > + def getBaudrate(self): > + """Get the current baud rate setting.""" > + return self._baudrate > + > + baudrate = property(getBaudrate, setBaudrate, doc="Baud rate setting") > + > + > + def setByteSize(self, bytesize): > + """Change byte size.""" > + if bytesize not in self.BYTESIZES: raise ValueError("Not a valid byte size: %r" % (bytesize,)) > + self._bytesize = bytesize > + if self._isOpen: self._reconfigurePort() > + > + def getByteSize(self): > + """Get the current byte size setting.""" > + return self._bytesize > + > + bytesize = property(getByteSize, setByteSize, doc="Byte size setting") > + > + > + def setParity(self, parity): > + """Change parity setting.""" > + if parity not in self.PARITIES: raise ValueError("Not a valid parity: %r" % (parity,)) > + self._parity = parity > + if self._isOpen: self._reconfigurePort() > + > + def getParity(self): > + """Get the current parity setting.""" > + return self._parity > + > + parity = property(getParity, setParity, doc="Parity setting") > + > + > + def setStopbits(self, stopbits): > + """Change stop bits size.""" > + if stopbits not in self.STOPBITS: raise ValueError("Not a valid stop bit size: %r" % (stopbits,)) > + self._stopbits = stopbits > + if self._isOpen: self._reconfigurePort() > + > + def getStopbits(self): > + """Get the current stop bits setting.""" > + return self._stopbits > + > + stopbits = property(getStopbits, setStopbits, doc="Stop bits setting") > + > + > + def setTimeout(self, timeout): > + """Change timeout setting.""" > + if timeout is not None: > + try: > + timeout + 1 # test if it's a number, will throw a TypeError if not... > + except TypeError: > + raise ValueError("Not a valid timeout: %r" % (timeout,)) > + if timeout < 0: raise ValueError("Not a valid timeout: %r" % (timeout,)) > + self._timeout = timeout > + if self._isOpen: self._reconfigurePort() > + > + def getTimeout(self): > + """Get the current timeout setting.""" > + return self._timeout > + > + timeout = property(getTimeout, setTimeout, doc="Timeout setting for read()") > + > + > + def setWriteTimeout(self, timeout): > + """Change timeout setting.""" > + if timeout is not None: > + if timeout < 0: raise ValueError("Not a valid timeout: %r" % (timeout,)) > + try: > + timeout + 1 #test if it's a number, will throw a TypeError if not... > + except TypeError: > + raise ValueError("Not a valid timeout: %r" % timeout) > + > + self._writeTimeout = timeout > + if self._isOpen: self._reconfigurePort() > + > + def getWriteTimeout(self): > + """Get the current timeout setting.""" > + return self._writeTimeout > + > + writeTimeout = property(getWriteTimeout, setWriteTimeout, doc="Timeout setting for write()") > + > + > + def setXonXoff(self, xonxoff): > + """Change XON/XOFF setting.""" > + self._xonxoff = xonxoff > + if self._isOpen: self._reconfigurePort() > + > + def getXonXoff(self): > + """Get the current XON/XOFF setting.""" > + return self._xonxoff > + > + xonxoff = property(getXonXoff, setXonXoff, doc="XON/XOFF setting") > + > + def setRtsCts(self, rtscts): > + """Change RTS/CTS flow control setting.""" > + self._rtscts = rtscts > + if self._isOpen: self._reconfigurePort() > + > + def getRtsCts(self): > + """Get the current RTS/CTS flow control setting.""" > + return self._rtscts > + > + rtscts = property(getRtsCts, setRtsCts, doc="RTS/CTS flow control setting") > + > + def setDsrDtr(self, dsrdtr=None): > + """Change DsrDtr flow control setting.""" > + if dsrdtr is None: > + # if not set, keep backwards compatibility and follow rtscts setting > + self._dsrdtr = self._rtscts > + else: > + # if defined independently, follow its value > + self._dsrdtr = dsrdtr > + if self._isOpen: self._reconfigurePort() > + > + def getDsrDtr(self): > + """Get the current DSR/DTR flow control setting.""" > + return self._dsrdtr > + > + dsrdtr = property(getDsrDtr, setDsrDtr, "DSR/DTR flow control setting") > + > + def setInterCharTimeout(self, interCharTimeout): > + """Change inter-character timeout setting.""" > + if interCharTimeout is not None: > + if interCharTimeout < 0: raise ValueError("Not a valid timeout: %r" % interCharTimeout) > + try: > + interCharTimeout + 1 # test if it's a number, will throw a TypeError if not... > + except TypeError: > + raise ValueError("Not a valid timeout: %r" % interCharTimeout) > + > + self._interCharTimeout = interCharTimeout > + if self._isOpen: self._reconfigurePort() > + > + def getInterCharTimeout(self): > + """Get the current inter-character timeout setting.""" > + return self._interCharTimeout > + > + interCharTimeout = property(getInterCharTimeout, setInterCharTimeout, doc="Inter-character timeout setting for read()") > + > + # - - - - - - - - - - - - - - - - - - - - - - - - > + > + _SETTINGS = ('baudrate', 'bytesize', 'parity', 'stopbits', 'xonxoff', > + 'dsrdtr', 'rtscts', 'timeout', 'writeTimeout', 'interCharTimeout') > + > + def getSettingsDict(self): > + """\ > + Get current port settings as a dictionary. For use with > + applySettingsDict. > + """ > + return dict([(key, getattr(self, '_'+key)) for key in self._SETTINGS]) > + > + def applySettingsDict(self, d): > + """\ > + apply stored settings from a dictionary returned from > + getSettingsDict. it's allowed to delete keys from the dictionary. these > + values will simply left unchanged. > + """ > + for key in self._SETTINGS: > + if d[key] != getattr(self, '_'+key): # check against internal "_" value > + setattr(self, key, d[key]) # set non "_" value to use properties write function > + > + # - - - - - - - - - - - - - - - - - - - - - - - - > + > + def __repr__(self): > + """String representation of the current port settings and its state.""" > + return "%s(port=%r, baudrate=%r, bytesize=%r, parity=%r, stopbits=%r, timeout=%r, xonxoff=%r, rtscts=%r, dsrdtr=%r)" % ( > + self.__class__.__name__, > + id(self), > + self._isOpen, > + self.portstr, > + self.baudrate, > + self.bytesize, > + self.parity, > + self.stopbits, > + self.timeout, > + self.xonxoff, > + self.rtscts, > + self.dsrdtr, > + ) > + > + > + # - - - - - - - - - - - - - - - - - - - - - - - - > + # compatibility with io library > + > + def readable(self): return True > + def writable(self): return True > + def seekable(self): return False > + def readinto(self, b): > + data = self.read(len(b)) > + n = len(data) > + try: > + b[:n] = data > + except TypeError, err: > + import array > + if not isinstance(b, array.array): > + raise err > + b[:n] = array.array('b', data) > + return n > + > + > +if __name__ == '__main__': > + import sys > + s = SerialBase() > + sys.stdout.write('port name: %s\n' % s.portstr) > + sys.stdout.write('baud rates: %s\n' % s.getSupportedBaudrates()) > + sys.stdout.write('byte sizes: %s\n' % s.getSupportedByteSizes()) > + sys.stdout.write('parities: %s\n' % s.getSupportedParities()) > + sys.stdout.write('stop bits: %s\n' % s.getSupportedStopbits()) > + sys.stdout.write('%s\n' % s) > diff --git a/scripts/serial/tools/__init__.py b/scripts/serial/tools/__init__.py > new file mode 100644 > index 0000000..e69de29 > diff --git a/scripts/serial/tools/list_ports.py b/scripts/serial/tools/list_ports.py > new file mode 100644 > index 0000000..d373a55 > --- /dev/null > +++ b/scripts/serial/tools/list_ports.py > @@ -0,0 +1,103 @@ > +#!/usr/bin/env python > + > +# portable serial port access with python > +# this is a wrapper module for different platform implementations of the > +# port enumeration feature > +# > +# (C) 2011-2013 Chris Liechti > +# this is distributed under a free software license, see license.txt > + > +"""\ > +This module will provide a function called comports that returns an > +iterable (generator or list) that will enumerate available com ports. Note that > +on some systems non-existent ports may be listed. > + > +Additionally a grep function is supplied that can be used to search for ports > +based on their descriptions or hardware ID. > +""" > + > +import sys, os, re > + > +# chose an implementation, depending on os > +#~ if sys.platform == 'cli': > +#~ else: > +import os > +# chose an implementation, depending on os > +if os.name == 'nt': #sys.platform == 'win32': > + from serial.tools.list_ports_windows import * > +elif os.name == 'posix': > + from serial.tools.list_ports_posix import * > +#~ elif os.name == 'java': > +else: > + raise ImportError("Sorry: no implementation for your platform ('%s') available" % (os.name,)) > + > +# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > + > +def grep(regexp): > + """\ > + Search for ports using a regular expression. Port name, description and > + hardware ID are searched. The function returns an iterable that returns the > + same tuples as comport() would do. > + """ > + r = re.compile(regexp, re.I) > + for port, desc, hwid in comports(): > + if r.search(port) or r.search(desc) or r.search(hwid): > + yield port, desc, hwid > + > + > +# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > +def main(): > + import optparse > + > + parser = optparse.OptionParser( > + usage = "%prog [options] []", > + description = "Miniterm - A simple terminal program for the serial port." > + ) > + > + parser.add_option("--debug", > + help="print debug messages and tracebacks (development mode)", > + dest="debug", > + default=False, > + action='store_true') > + > + parser.add_option("-v", "--verbose", > + help="show more messages (can be given multiple times)", > + dest="verbose", > + default=1, > + action='count') > + > + parser.add_option("-q", "--quiet", > + help="suppress all messages", > + dest="verbose", > + action='store_const', > + const=0) > + > + (options, args) = parser.parse_args() > + > + > + hits = 0 > + # get iteraror w/ or w/o filter > + if args: > + if len(args) > 1: > + parser.error('more than one regexp not supported') > + print "Filtered list with regexp: %r" % (args[0],) > + iterator = sorted(grep(args[0])) > + else: > + iterator = sorted(comports()) > + # list them > + for port, desc, hwid in iterator: > + print("%-20s" % (port,)) > + if options.verbose > 1: > + print(" desc: %s" % (desc,)) > + print(" hwid: %s" % (hwid,)) > + hits += 1 > + if options.verbose: > + if hits: > + print("%d ports found" % (hits,)) > + else: > + print("no ports found") > + > +# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > +# test > +if __name__ == '__main__': > + main() > diff --git a/scripts/serial/tools/list_ports_linux.py b/scripts/serial/tools/list_ports_linux.py > new file mode 100644 > index 0000000..955761e > --- /dev/null > +++ b/scripts/serial/tools/list_ports_linux.py > @@ -0,0 +1,152 @@ > +#!/usr/bin/env python > + > +# portable serial port access with python > +# > +# This is a module that gathers a list of serial ports including details on > +# GNU/Linux systems > +# > +# (C) 2011-2013 Chris Liechti > +# this is distributed under a free software license, see license.txt > + > +import glob > +import sys > +import os > +import re > + > +try: > + import subprocess > +except ImportError: > + def popen(argv): > + try: > + si, so = os.popen4(' '.join(argv)) > + return so.read().strip() > + except: > + raise IOError('lsusb failed') > +else: > + def popen(argv): > + try: > + return subprocess.check_output(argv, stderr=subprocess.STDOUT).strip() > + except: > + raise IOError('lsusb failed') > + > + > +# The comports function is expected to return an iterable that yields tuples of > +# 3 strings: port name, human readable description and a hardware ID. > +# > +# as currently no method is known to get the second two strings easily, they > +# are currently just identical to the port name. > + > +# try to detect the OS so that a device can be selected... > +plat = sys.platform.lower() > + > +def read_line(filename): > + """\ > + Helper function to read a single line from a file. > + Returns None on errors.. > + """ > + try: > + f = open(filename) > + line = f.readline().strip() > + f.close() > + return line > + except IOError: > + return None > + > +def re_group(regexp, text): > + """search for regexp in text, return 1st group on match""" > + if sys.version < '3': > + m = re.search(regexp, text) > + else: > + # text is bytes-like > + m = re.search(regexp, text.decode('ascii', 'replace')) > + if m: return m.group(1) > + > + > +# try to extract descriptions from sysfs. this was done by experimenting, > +# no guarantee that it works for all devices or in the future... > + > +def usb_sysfs_hw_string(sysfs_path): > + """given a path to a usb device in sysfs, return a string describing it""" > + bus, dev = os.path.basename(os.path.realpath(sysfs_path)).split('-') > + snr = read_line(sysfs_path+'/serial') > + if snr: > + snr_txt = ' SNR=%s' % (snr,) > + else: > + snr_txt = '' > + return 'USB VID:PID=%s:%s%s' % ( > + read_line(sysfs_path+'/idVendor'), > + read_line(sysfs_path+'/idProduct'), > + snr_txt > + ) > + > +def usb_lsusb_string(sysfs_path): > + base = os.path.basename(os.path.realpath(sysfs_path)) > + bus = base.split('-')[0] > + try: > + dev = int(read_line(os.path.join(sysfs_path, 'devnum'))) > + desc = popen(['lsusb', '-v', '-s', '%s:%s' % (bus, dev)]) > + # descriptions from device > + iManufacturer = re_group('iManufacturer\s+\w+ (.+)', desc) > + iProduct = re_group('iProduct\s+\w+ (.+)', desc) > + iSerial = re_group('iSerial\s+\w+ (.+)', desc) or '' > + # descriptions from kernel > + idVendor = re_group('idVendor\s+0x\w+ (.+)', desc) > + idProduct = re_group('idProduct\s+0x\w+ (.+)', desc) > + # create descriptions. prefer text from device, fall back to the others > + return '%s %s %s' % (iManufacturer or idVendor, iProduct or idProduct, iSerial) > + except IOError: > + return base > + > +def describe(device): > + """\ > + Get a human readable description. > + For USB-Serial devices try to run lsusb to get a human readable description. > + For USB-CDC devices read the description from sysfs. > + """ > + base = os.path.basename(device) > + # USB-Serial devices > + sys_dev_path = '/sys/class/tty/%s/device/driver/%s' % (base, base) > + if os.path.exists(sys_dev_path): > + sys_usb = os.path.dirname(os.path.dirname(os.path.realpath(sys_dev_path))) > + return usb_lsusb_string(sys_usb) > + # USB-CDC devices > + sys_dev_path = '/sys/class/tty/%s/device/interface' % (base,) > + if os.path.exists(sys_dev_path): > + return read_line(sys_dev_path) > + # USB Product Information > + sys_dev_path = '/sys/class/tty/%s/device' % (base,) > + if os.path.exists(sys_dev_path): > + product_name_file = os.path.dirname(os.path.realpath(sys_dev_path)) + "/product" > + if os.path.exists(product_name_file): > + return read_line(product_name_file) > + return base > + > +def hwinfo(device): > + """Try to get a HW identification using sysfs""" > + base = os.path.basename(device) > + if os.path.exists('/sys/class/tty/%s/device' % (base,)): > + # PCI based devices > + sys_id_path = '/sys/class/tty/%s/device/id' % (base,) > + if os.path.exists(sys_id_path): > + return read_line(sys_id_path) > + # USB-Serial devices > + sys_dev_path = '/sys/class/tty/%s/device/driver/%s' % (base, base) > + if os.path.exists(sys_dev_path): > + sys_usb = os.path.dirname(os.path.dirname(os.path.realpath(sys_dev_path))) > + return usb_sysfs_hw_string(sys_usb) > + # USB-CDC devices > + if base.startswith('ttyACM'): > + sys_dev_path = '/sys/class/tty/%s/device' % (base,) > + if os.path.exists(sys_dev_path): > + return usb_sysfs_hw_string(sys_dev_path + '/..') > + return 'n/a' # XXX directly remove these from the list? > + > +def comports(): > + devices = glob.glob('/dev/ttyS*') + glob.glob('/dev/ttyUSB*') + glob.glob('/dev/ttyACM*') > + return [(d, describe(d), hwinfo(d)) for d in devices] > + > +# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > +# test > +if __name__ == '__main__': > + for port, desc, hwid in sorted(comports()): > + print "%s: %s [%s]" % (port, desc, hwid) > diff --git a/scripts/serial/urlhandler/__init__.py b/scripts/serial/urlhandler/__init__.py > new file mode 100644 > index 0000000..e69de29 > diff --git a/scripts/serial/urlhandler/protocol_hwgrep.py b/scripts/serial/urlhandler/protocol_hwgrep.py > new file mode 100644 > index 0000000..62cda43 > --- /dev/null > +++ b/scripts/serial/urlhandler/protocol_hwgrep.py > @@ -0,0 +1,45 @@ > +#! python > +# > +# Python Serial Port Extension for Win32, Linux, BSD, Jython > +# see __init__.py > +# > +# This module implements a special URL handler that uses the port listing to > +# find ports by searching the string descriptions. > +# > +# (C) 2011 Chris Liechti > +# this is distributed under a free software license, see license.txt > +# > +# URL format: hwgrep://regexp > + > +import serial > +import serial.tools.list_ports > + > +class Serial(serial.Serial): > + """Just inherit the native Serial port implementation and patch the open function.""" > + > + def setPort(self, value): > + """translate port name before storing it""" > + if isinstance(value, basestring) and value.startswith('hwgrep://'): > + serial.Serial.setPort(self, self.fromURL(value)) > + else: > + serial.Serial.setPort(self, value) > + > + def fromURL(self, url): > + """extract host and port from an URL string""" > + if url.lower().startswith("hwgrep://"): url = url[9:] > + # use a for loop to get the 1st element from the generator > + for port, desc, hwid in serial.tools.list_ports.grep(url): > + return port > + else: > + raise serial.SerialException('no ports found matching regexp %r' % (url,)) > + > + # override property > + port = property(serial.Serial.getPort, setPort, doc="Port setting") > + > +# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > +if __name__ == '__main__': > + #~ s = Serial('hwgrep://ttyS0') > + s = Serial(None) > + s.port = 'hwgrep://ttyS0' > + print s > + > diff --git a/scripts/serial/urlhandler/protocol_loop.py b/scripts/serial/urlhandler/protocol_loop.py > new file mode 100644 > index 0000000..a414839 > --- /dev/null > +++ b/scripts/serial/urlhandler/protocol_loop.py > @@ -0,0 +1,279 @@ > +#! python > +# > +# Python Serial Port Extension for Win32, Linux, BSD, Jython > +# see __init__.py > +# > +# This module implements a loop back connection receiving itself what it sent. > +# > +# The purpose of this module is.. well... You can run the unit tests with it. > +# and it was so easy to implement ;-) > +# > +# (C) 2001-2011 Chris Liechti > +# this is distributed under a free software license, see license.txt > +# > +# URL format: loop://[option[/option...]] > +# options: > +# - "debug" print diagnostic messages > + > +from serial.serialutil import * > +import threading > +import time > +import logging > + > +# map log level names to constants. used in fromURL() > +LOGGER_LEVELS = { > + 'debug': logging.DEBUG, > + 'info': logging.INFO, > + 'warning': logging.WARNING, > + 'error': logging.ERROR, > + } > + > + > +class LoopbackSerial(SerialBase): > + """Serial port implementation that simulates a loop back connection in plain software.""" > + > + BAUDRATES = (50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, > + 9600, 19200, 38400, 57600, 115200) > + > + def open(self): > + """\ > + Open port with current settings. This may throw a SerialException > + if the port cannot be opened. > + """ > + if self._isOpen: > + raise SerialException("Port is already open.") > + self.logger = None > + self.buffer_lock = threading.Lock() > + self.loop_buffer = bytearray() > + self.cts = False > + self.dsr = False > + > + if self._port is None: > + raise SerialException("Port must be configured before it can be used.") > + # not that there is anything to open, but the function applies the > + # options found in the URL > + self.fromURL(self.port) > + > + # not that there anything to configure... > + self._reconfigurePort() > + # all things set up get, now a clean start > + self._isOpen = True > + if not self._rtscts: > + self.setRTS(True) > + self.setDTR(True) > + self.flushInput() > + self.flushOutput() > + > + def _reconfigurePort(self): > + """\ > + Set communication parameters on opened port. For the loop:// > + protocol all settings are ignored! > + """ > + # not that's it of any real use, but it helps in the unit tests > + if not isinstance(self._baudrate, (int, long)) or not 0 < self._baudrate < 2**32: > + raise ValueError("invalid baudrate: %r" % (self._baudrate)) > + if self.logger: > + self.logger.info('_reconfigurePort()') > + > + def close(self): > + """Close port""" > + if self._isOpen: > + self._isOpen = False > + # in case of quick reconnects, give the server some time > + time.sleep(0.3) > + > + def makeDeviceName(self, port): > + raise SerialException("there is no sensible way to turn numbers into URLs") > + > + def fromURL(self, url): > + """extract host and port from an URL string""" > + if url.lower().startswith("loop://"): url = url[7:] > + try: > + # process options now, directly altering self > + for option in url.split('/'): > + if '=' in option: > + option, value = option.split('=', 1) > + else: > + value = None > + if not option: > + pass > + elif option == 'logging': > + logging.basicConfig() # XXX is that good to call it here? > + self.logger = logging.getLogger('pySerial.loop') > + self.logger.setLevel(LOGGER_LEVELS[value]) > + self.logger.debug('enabled logging') > + else: > + raise ValueError('unknown option: %r' % (option,)) > + except ValueError, e: > + raise SerialException('expected a string in the form "[loop://][option[/option...]]": %s' % e) > + > + # - - - - - - - - - - - - - - - - - - - - - - - - > + > + def inWaiting(self): > + """Return the number of characters currently in the input buffer.""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + # attention the logged value can differ from return value in > + # threaded environments... > + self.logger.debug('inWaiting() -> %d' % (len(self.loop_buffer),)) > + return len(self.loop_buffer) > + > + def read(self, size=1): > + """\ > + Read size bytes from the serial port. If a timeout is set it may > + return less characters as requested. With no timeout it will block > + until the requested number of bytes is read. > + """ > + if not self._isOpen: raise portNotOpenError > + if self._timeout is not None: > + timeout = time.time() + self._timeout > + else: > + timeout = None > + data = bytearray() > + while size > 0: > + self.buffer_lock.acquire() > + try: > + block = to_bytes(self.loop_buffer[:size]) > + del self.loop_buffer[:size] > + finally: > + self.buffer_lock.release() > + data += block > + size -= len(block) > + # check for timeout now, after data has been read. > + # useful for timeout = 0 (non blocking) read > + if timeout and time.time() > timeout: > + break > + return bytes(data) > + > + def write(self, data): > + """\ > + Output the given string over the serial port. Can block if the > + connection is blocked. May raise SerialException if the connection is > + closed. > + """ > + if not self._isOpen: raise portNotOpenError > + # ensure we're working with bytes > + data = to_bytes(data) > + # calculate aprox time that would be used to send the data > + time_used_to_send = 10.0*len(data) / self._baudrate > + # when a write timeout is configured check if we would be successful > + # (not sending anything, not even the part that would have time) > + if self._writeTimeout is not None and time_used_to_send > self._writeTimeout: > + time.sleep(self._writeTimeout) # must wait so that unit test succeeds > + raise writeTimeoutError > + self.buffer_lock.acquire() > + try: > + self.loop_buffer += data > + finally: > + self.buffer_lock.release() > + return len(data) > + > + def flushInput(self): > + """Clear input buffer, discarding all that is in the buffer.""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('flushInput()') > + self.buffer_lock.acquire() > + try: > + del self.loop_buffer[:] > + finally: > + self.buffer_lock.release() > + > + def flushOutput(self): > + """\ > + Clear output buffer, aborting the current output and > + discarding all that is in the buffer. > + """ > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('flushOutput()') > + > + def sendBreak(self, duration=0.25): > + """\ > + Send break condition. Timed, returns to idle state after given > + duration. > + """ > + if not self._isOpen: raise portNotOpenError > + > + def setBreak(self, level=True): > + """\ > + Set break: Controls TXD. When active, to transmitting is > + possible. > + """ > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('setBreak(%r)' % (level,)) > + > + def setRTS(self, level=True): > + """Set terminal status line: Request To Send""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('setRTS(%r) -> state of CTS' % (level,)) > + self.cts = level > + > + def setDTR(self, level=True): > + """Set terminal status line: Data Terminal Ready""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('setDTR(%r) -> state of DSR' % (level,)) > + self.dsr = level > + > + def getCTS(self): > + """Read terminal status line: Clear To Send""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('getCTS() -> state of RTS (%r)' % (self.cts,)) > + return self.cts > + > + def getDSR(self): > + """Read terminal status line: Data Set Ready""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('getDSR() -> state of DTR (%r)' % (self.dsr,)) > + return self.dsr > + > + def getRI(self): > + """Read terminal status line: Ring Indicator""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('returning dummy for getRI()') > + return False > + > + def getCD(self): > + """Read terminal status line: Carrier Detect""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('returning dummy for getCD()') > + return True > + > + # - - - platform specific - - - > + # None so far > + > + > +# assemble Serial class with the platform specific implementation and the base > +# for file-like behavior. for Python 2.6 and newer, that provide the new I/O > +# library, derive from io.RawIOBase > +try: > + import io > +except ImportError: > + # classic version with our own file-like emulation > + class Serial(LoopbackSerial, FileLike): > + pass > +else: > + # io library present > + class Serial(LoopbackSerial, io.RawIOBase): > + pass > + > + > +# simple client test > +if __name__ == '__main__': > + import sys > + s = Serial('loop://') > + sys.stdout.write('%s\n' % s) > + > + sys.stdout.write("write...\n") > + s.write("hello\n") > + s.flush() > + sys.stdout.write("read: %s\n" % s.read(5)) > + > + s.close() > diff --git a/scripts/serial/urlhandler/protocol_rfc2217.py b/scripts/serial/urlhandler/protocol_rfc2217.py > new file mode 100644 > index 0000000..981ba45 > --- /dev/null > +++ b/scripts/serial/urlhandler/protocol_rfc2217.py > @@ -0,0 +1,11 @@ > +#! python > +# > +# Python Serial Port Extension for Win32, Linux, BSD, Jython > +# see ../__init__.py > +# > +# This is a thin wrapper to load the rfc2271 implementation. > +# > +# (C) 2011 Chris Liechti > +# this is distributed under a free software license, see license.txt > + > +from serial.rfc2217 import Serial > diff --git a/scripts/serial/urlhandler/protocol_socket.py b/scripts/serial/urlhandler/protocol_socket.py > new file mode 100644 > index 0000000..dc59923 > --- /dev/null > +++ b/scripts/serial/urlhandler/protocol_socket.py > @@ -0,0 +1,291 @@ > +#! python > +# > +# Python Serial Port Extension for Win32, Linux, BSD, Jython > +# see __init__.py > +# > +# This module implements a simple socket based client. > +# It does not support changing any port parameters and will silently ignore any > +# requests to do so. > +# > +# The purpose of this module is that applications using pySerial can connect to > +# TCP/IP to serial port converters that do not support RFC 2217. > +# > +# (C) 2001-2011 Chris Liechti > +# this is distributed under a free software license, see license.txt > +# > +# URL format: socket://:[/option[/option...]] > +# options: > +# - "debug" print diagnostic messages > + > +from serial.serialutil import * > +import time > +import socket > +import select > +import logging > + > +# map log level names to constants. used in fromURL() > +LOGGER_LEVELS = { > + 'debug': logging.DEBUG, > + 'info': logging.INFO, > + 'warning': logging.WARNING, > + 'error': logging.ERROR, > + } > + > +POLL_TIMEOUT = 2 > + > +class SocketSerial(SerialBase): > + """Serial port implementation for plain sockets.""" > + > + BAUDRATES = (50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, > + 9600, 19200, 38400, 57600, 115200) > + > + def open(self): > + """\ > + Open port with current settings. This may throw a SerialException > + if the port cannot be opened. > + """ > + self.logger = None > + if self._port is None: > + raise SerialException("Port must be configured before it can be used.") > + if self._isOpen: > + raise SerialException("Port is already open.") > + try: > + # XXX in future replace with create_connection (py >=2.6) > + self._socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM) > + self._socket.connect(self.fromURL(self.portstr)) > + except Exception, msg: > + self._socket = None > + raise SerialException("Could not open port %s: %s" % (self.portstr, msg)) > + > + self._socket.settimeout(POLL_TIMEOUT) # used for write timeout support :/ > + > + # not that there anything to configure... > + self._reconfigurePort() > + # all things set up get, now a clean start > + self._isOpen = True > + if not self._rtscts: > + self.setRTS(True) > + self.setDTR(True) > + self.flushInput() > + self.flushOutput() > + > + def _reconfigurePort(self): > + """\ > + Set communication parameters on opened port. For the socket:// > + protocol all settings are ignored! > + """ > + if self._socket is None: > + raise SerialException("Can only operate on open ports") > + if self.logger: > + self.logger.info('ignored port configuration change') > + > + def close(self): > + """Close port""" > + if self._isOpen: > + if self._socket: > + try: > + self._socket.shutdown(socket.SHUT_RDWR) > + self._socket.close() > + except: > + # ignore errors. > + pass > + self._socket = None > + self._isOpen = False > + # in case of quick reconnects, give the server some time > + time.sleep(0.3) > + > + def makeDeviceName(self, port): > + raise SerialException("there is no sensible way to turn numbers into URLs") > + > + def fromURL(self, url): > + """extract host and port from an URL string""" > + if url.lower().startswith("socket://"): url = url[9:] > + try: > + # is there a "path" (our options)? > + if '/' in url: > + # cut away options > + url, options = url.split('/', 1) > + # process options now, directly altering self > + for option in options.split('/'): > + if '=' in option: > + option, value = option.split('=', 1) > + else: > + value = None > + if option == 'logging': > + logging.basicConfig() # XXX is that good to call it here? > + self.logger = logging.getLogger('pySerial.socket') > + self.logger.setLevel(LOGGER_LEVELS[value]) > + self.logger.debug('enabled logging') > + else: > + raise ValueError('unknown option: %r' % (option,)) > + # get host and port > + host, port = url.split(':', 1) # may raise ValueError because of unpacking > + port = int(port) # and this if it's not a number > + if not 0 <= port < 65536: raise ValueError("port not in range 0...65535") > + except ValueError, e: > + raise SerialException('expected a string in the form "[rfc2217://]:[/option[/option...]]": %s' % e) > + return (host, port) > + > + # - - - - - - - - - - - - - - - - - - - - - - - - > + > + def inWaiting(self): > + """Return the number of characters currently in the input buffer.""" > + if not self._isOpen: raise portNotOpenError > + # Poll the socket to see if it is ready for reading. > + # If ready, at least one byte will be to read. > + lr, lw, lx = select.select([self._socket], [], [], 0) > + return len(lr) > + > + def read(self, size=1): > + """\ > + Read size bytes from the serial port. If a timeout is set it may > + return less characters as requested. With no timeout it will block > + until the requested number of bytes is read. > + """ > + if not self._isOpen: raise portNotOpenError > + data = bytearray() > + if self._timeout is not None: > + timeout = time.time() + self._timeout > + else: > + timeout = None > + while len(data) < size and (timeout is None or time.time() < timeout): > + try: > + # an implementation with internal buffer would be better > + # performing... > + t = time.time() > + block = self._socket.recv(size - len(data)) > + duration = time.time() - t > + if block: > + data.extend(block) > + else: > + # no data -> EOF (connection probably closed) > + break > + except socket.timeout: > + # just need to get out of recv from time to time to check if > + # still alive > + continue > + except socket.error, e: > + # connection fails -> terminate loop > + raise SerialException('connection failed (%s)' % e) > + return bytes(data) > + > + def write(self, data): > + """\ > + Output the given string over the serial port. Can block if the > + connection is blocked. May raise SerialException if the connection is > + closed. > + """ > + if not self._isOpen: raise portNotOpenError > + try: > + self._socket.sendall(to_bytes(data)) > + except socket.error, e: > + # XXX what exception if socket connection fails > + raise SerialException("socket connection failed: %s" % e) > + return len(data) > + > + def flushInput(self): > + """Clear input buffer, discarding all that is in the buffer.""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('ignored flushInput') > + > + def flushOutput(self): > + """\ > + Clear output buffer, aborting the current output and > + discarding all that is in the buffer. > + """ > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('ignored flushOutput') > + > + def sendBreak(self, duration=0.25): > + """\ > + Send break condition. Timed, returns to idle state after given > + duration. > + """ > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('ignored sendBreak(%r)' % (duration,)) > + > + def setBreak(self, level=True): > + """Set break: Controls TXD. When active, to transmitting is > + possible.""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('ignored setBreak(%r)' % (level,)) > + > + def setRTS(self, level=True): > + """Set terminal status line: Request To Send""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('ignored setRTS(%r)' % (level,)) > + > + def setDTR(self, level=True): > + """Set terminal status line: Data Terminal Ready""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('ignored setDTR(%r)' % (level,)) > + > + def getCTS(self): > + """Read terminal status line: Clear To Send""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('returning dummy for getCTS()') > + return True > + > + def getDSR(self): > + """Read terminal status line: Data Set Ready""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('returning dummy for getDSR()') > + return True > + > + def getRI(self): > + """Read terminal status line: Ring Indicator""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('returning dummy for getRI()') > + return False > + > + def getCD(self): > + """Read terminal status line: Carrier Detect""" > + if not self._isOpen: raise portNotOpenError > + if self.logger: > + self.logger.info('returning dummy for getCD()') > + return True > + > + # - - - platform specific - - - > + > + # works on Linux and probably all the other POSIX systems > + def fileno(self): > + """Get the file handle of the underlying socket for use with select""" > + return self._socket.fileno() > + > + > +# assemble Serial class with the platform specific implementation and the base > +# for file-like behavior. for Python 2.6 and newer, that provide the new I/O > +# library, derive from io.RawIOBase > +try: > + import io > +except ImportError: > + # classic version with our own file-like emulation > + class Serial(SocketSerial, FileLike): > + pass > +else: > + # io library present > + class Serial(SocketSerial, io.RawIOBase): > + pass > + > + > +# simple client test > +if __name__ == '__main__': > + import sys > + s = Serial('socket://localhost:7000') > + sys.stdout.write('%s\n' % s) > + > + sys.stdout.write("write...\n") > + s.write("hello\n") > + s.flush() > + sys.stdout.write("read: %s\n" % s.read(5)) > + > + s.close() > -- > 2.6.4 > > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox