From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: "barebox@lists.infradead.org" <barebox@lists.infradead.org>
Subject: Re: [PATCH 10/20] i.MX: clk: Port imx_check_clocks() and imx_obtain_fixed_clock()
Date: Tue, 4 Oct 2016 06:43:01 -0700 [thread overview]
Message-ID: <CAHQ1cqE3UduSbJ5u_y4Rpi4qUcFD3EYzqCDxv5iQckw3cAv9qQ@mail.gmail.com> (raw)
In-Reply-To: <20161004064923.txvdncnm57xwor5h@pengutronix.de>
On Mon, Oct 3, 2016 at 11:49 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> On Mon, Oct 03, 2016 at 07:40:47AM -0700, Andrey Smirnov wrote:
>> Port imx_check_clocks() and imx_obtain_fixed_clock() from Linux kernel.
>>
>> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
>> ---
>> arch/arm/mach-imx/clk.h | 4 ++++
>> drivers/clk/Makefile | 1 +
>> drivers/clk/imx/Makefile | 1 +
>> drivers/clk/imx/clk.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++++
>> 4 files changed, 55 insertions(+)
>> create mode 100644 drivers/clk/imx/Makefile
>> create mode 100644 drivers/clk/imx/clk.c
>>
>> diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
>> index 35e480f..f96e5d2 100644
>> --- a/arch/arm/mach-imx/clk.h
>> +++ b/arch/arm/mach-imx/clk.h
>> @@ -109,4 +109,8 @@ static inline struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg,
>> struct clk *imx_clk_gate_exclusive(const char *name, const char *parent,
>> void __iomem *reg, u8 shift, u32 exclusive_mask);
>>
>> +void imx_check_clocks(struct clk *clks[], unsigned int count);
>> +struct clk * __init imx_obtain_fixed_clock(const char *name, unsigned long rate);
>> +
>> +
>> #endif /* __IMX_CLK_H */
>> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
>> index 0fe8f1e..6dc82ea 100644
>> --- a/drivers/clk/Makefile
>> +++ b/drivers/clk/Makefile
>> @@ -9,3 +9,4 @@ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
>> obj-$(CONFIG_ARCH_TEGRA) += tegra/
>> obj-$(CONFIG_CLK_SOCFPGA) += socfpga.o
>> obj-$(CONFIG_MACH_MIPS_ATH79) += clk-ar933x.o
>> +obj-$(CONFIG_COMMON_CLK) += imx/
>> diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
>> new file mode 100644
>> index 0000000..0303c0b
>> --- /dev/null
>> +++ b/drivers/clk/imx/Makefile
>> @@ -0,0 +1 @@
>> +obj-y += clk.o
>> diff --git a/drivers/clk/imx/clk.c b/drivers/clk/imx/clk.c
>> new file mode 100644
>> index 0000000..0357048
>> --- /dev/null
>> +++ b/drivers/clk/imx/clk.c
>
> We currently have the i.MX clock support in arch/arm/mach-imx/. This may
> or may not be changed, but until it is, other i.MX clock support code
> should go to arch/arm/mach-imx/ aswell.
My preference would be to try to move the rest of i.MX clock code to
drivers/clk, to reconcile with how it is done in Linux kernel. Is that
OK with you or would you rather I move everything to
arch/arm/mach-imx?
>
>> @@ -0,0 +1,49 @@
>> +#include <common.h>
>> +#include <init.h>
>> +#include <driver.h>
>> +#include <linux/clk.h>
>> +#include <io.h>
>> +#include <of.h>
>> +#include <linux/clkdev.h>
>> +#include <linux/err.h>
>> +
>> +#include "../../../arch/arm/mach-imx/clk.h"
>
> #include <mach/clk.h>
>
>> +
>> +void __init imx_check_clocks(struct clk *clks[], unsigned int count)
>> +{
>> + unsigned i;
>> +
>> + for (i = 0; i < count; i++)
>> + if (IS_ERR(clks[i]))
>> + pr_err("i.MX clk %u: register failed with %ld\n",
>> + i, PTR_ERR(clks[i]));
>> +}
>> +
>> +static struct clk * __init imx_obtain_fixed_clock_from_dt(const char *name)
>> +{
>> + struct of_phandle_args phandle;
>> + struct clk *clk = ERR_PTR(-ENODEV);
>> + char *path;
>> +
>> + path = basprintf("/clocks/%s", name);
>> + if (!path)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + phandle.np = of_find_node_by_path(path);
>> + kfree(path);
>> +
>> + if (phandle.np)
>> + clk = of_clk_get_from_provider(&phandle);
>> +
>> + return clk;
>> +}
>
> Do we need this anyway? We already have clk providers for fixed-clock.
> Hm, looking further, maybe a later patch explains.
OK, I'll remove it and add DT fixes if needed in v2.
Thanks,
Andrey
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-10-04 13:43 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-03 14:40 [PATCH 00/20] Vybrid support in Barebox Andrey Smirnov
2016-10-03 14:40 ` [PATCH 01/20] i.MX: Add primitive functions for VF610 family Andrey Smirnov
2016-10-03 14:40 ` [PATCH 02/20] i.MX: Add DEBUG_LL hooks for VF610 Andrey Smirnov
2016-10-04 6:24 ` Sascha Hauer
2016-10-04 13:27 ` Andrey Smirnov
2016-10-03 14:40 ` [PATCH 03/20] i.MX: scripts: Add "vf610" soc to imx-image Andrey Smirnov
2016-10-03 14:40 ` [PATCH 04/20] i.MX: Add support for VF610 Tower board Andrey Smirnov
2016-10-04 6:32 ` Sascha Hauer
2016-10-04 13:34 ` Andrey Smirnov
2016-10-07 7:56 ` Sascha Hauer
2016-10-03 14:40 ` [PATCH 05/20] i.MX: Add pinctrl driver for VF610 Andrey Smirnov
2016-10-03 14:40 ` [PATCH 06/20] clk: Port clock dependency resolution code Andrey Smirnov
2016-10-03 14:40 ` [PATCH 07/20] clk: Port of_clk_set_defautls() Andrey Smirnov
2016-10-04 6:38 ` Sascha Hauer
2016-10-04 13:36 ` Andrey Smirnov
2016-10-03 14:40 ` [PATCH 08/20] i.MX: clk: Port imx_clk_gate2_cgr() Andrey Smirnov
2016-10-03 14:40 ` [PATCH 09/20] i.MX: clk: Add IMX_PLLV3_USB_VF610 support Andrey Smirnov
2016-10-03 14:40 ` [PATCH 10/20] i.MX: clk: Port imx_check_clocks() and imx_obtain_fixed_clock() Andrey Smirnov
2016-10-04 6:49 ` Sascha Hauer
2016-10-04 13:43 ` Andrey Smirnov [this message]
2016-10-04 19:28 ` Sascha Hauer
2016-10-03 14:40 ` [PATCH 11/20] i.MX: Add VF610 clock tree initialization code Andrey Smirnov
2016-10-04 6:58 ` Sascha Hauer
2016-10-04 13:44 ` Andrey Smirnov
2016-10-03 14:40 ` [PATCH 12/20] vf610: Give enet_osc explicit "enet_ext" name Andrey Smirnov
2016-10-03 14:40 ` [PATCH 13/20] i.MX: Add 'lpuart' serial driver Andrey Smirnov
2016-10-04 7:13 ` Sascha Hauer
2016-10-04 13:56 ` Andrey Smirnov
2016-10-04 19:25 ` Sascha Hauer
2016-10-03 14:40 ` [PATCH 14/20] i.MX: i2c-imx: Add Vybrid support Andrey Smirnov
2016-10-04 7:20 ` Sascha Hauer
2016-10-04 13:57 ` Andrey Smirnov
2016-10-03 14:40 ` [PATCH 15/20] i.MX: esdhc: Do not rely on CPU type for quirks Andrey Smirnov
2016-10-03 14:40 ` [PATCH 16/20] i.MX: Kconfig: Enable OCOTP on Vybrid Andrey Smirnov
2016-10-03 14:40 ` [PATCH 17/20] i.MX: ocotp: Remove unused #define Andrey Smirnov
2016-10-03 14:40 ` [PATCH 18/20] i.MX: ocotp: Account for shadow memory gaps Andrey Smirnov
2016-10-03 14:40 ` [PATCH 19/20] i.MX: ocotp: Add Vybrid support Andrey Smirnov
2016-10-03 14:40 ` [PATCH 20/20] imx-esdhc: Request "per" clock explicitly Andrey Smirnov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAHQ1cqE3UduSbJ5u_y4Rpi4qUcFD3EYzqCDxv5iQckw3cAv9qQ@mail.gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox