From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Barebox List <barebox@lists.infradead.org>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: Re: [PATCH v3 00/38] ARM: i.MX8MQ and EVK support
Date: Thu, 7 Jun 2018 05:59:09 -0700 [thread overview]
Message-ID: <CAHQ1cqEBHRFxmaxMe8HF+KDR7Db1BA0h2iMd-AOe0jCWR_jsQA@mail.gmail.com> (raw)
In-Reply-To: <20180606184431.10348-1-andrew.smirnov@gmail.com>
On Wed, Jun 6, 2018 at 11:43 AM, Andrey Smirnov
<andrew.smirnov@gmail.com> wrote:
> Everyone:
>
> Picking up where Sascha left off, this is the next version of the
> patchset that adds support for i.MX8MQ EVK board.
>
> This patchest is also availible at:
>
> https://github.com/ndreys/barebox/tree/imx8m-support-v3
>
> Changes since [v2]:
>
> - i.MX8 specific eSDHC bootstrap code code fixed to function
> correctly with high capacity SD cards
>
> - DDR PHY firmware converted to use Sascha's firmware framework and
> be SoC specific (can be shared among different boards)
>
> - DDR register definitions moved to imx8-ddrc.h as well as cleaned
> up to contain only constants that are being used
>
> - Incorporated imx-image i.MX8 work done by Sascha as well as extend
> it to create valid AArch64 header
>
> - Patchset is rebase on latest 'next' branch to accomodate recent
> OCOTP changes
>
> Changes since [v1]:
>
> - The patchset now allows building 1st stage bootloader that can be
> progammed on SD card and booted standalone
>
> Currently out of scope of this patch (not tested or documented, will
> be coming in a follow up series):
>
> - Integration of ARM Trusted Firmware
>
> - Booting Linux kernel
>
> Current assumptions (all subject to change, but listed below to be
> explicit):
>
> - DDR initialization code is auto-generated by i.MX8M DDR Tool and
> used as close to as-is as possible.
>
> Feedback is wellcome!
>
> Thanks,
> Andrey Smirnov
>
> [v1] http://lists.infradead.org/pipermail/barebox/2018-March/032386.html
> [v2] http://lists.infradead.org/pipermail/barebox/2018-May/033149.html
>
> Andrey Smirnov (23):
> net: fec_imx: Make use of IS_ALIGNED
> ARM: i.MX: Split shared CCM code into a separate file
> ARM: i.MX: Add IOMUX pad constants for i.MX8
> ARM: i.MX: Add basic CCM constants for i.MX8
> ARM: Add constants and helpers for system counter interface
> clocksource: armv8-timer: Convert explicit assembly into helpers
> ARM: i.MX8: Initialize system counter
> ARM: i.MX: boot: Fix address casting on 64-bit platforms
> ARM: boot: Add trivial i.MX8 support
> ARM: i.MX: xload-esdhc: Rework to make code be less i.MX6-specific
> ARM: i.MX: xload-esdhc: Allow custom buffer address, device offset
> ARM: i.MX: xload-esdhc: Add support for i.MX8
> pinctrl: i.MX: Add support for i.MX8
> Documentation: imx: Change block size for 'dd' to 1024
> Documentation: i.MX: Add missing <soctype>
> clocksource: armv8-timer: Make armv8_clocksource_read() static
> clocksource: armv8-timer: Make use of postcore_platform_driver()
> Port <linux/iopoll.h> from U-Boot
> common/clock: Move delay and timeout functions to clock.h
> clock: Use udelay() to implement mdelay()
> ARM: i.MX8: Add DDRC PHY and DDR CTL base addresses
> ARM: i.MX8: Add DDRC PHY support code
> ARM: Specify HAVE_PBL_IMAGE for CPU_64
>
> Sascha Hauer (15):
> ARM: i.MX: xload: Fix compiler warning
> ARM: i.MX: compile arm32 specific errata only for CPU32
> ARM: Add i.MX8 support
> aarch64: Add i.MX8 debug UART support
> Include our own include/dt-bindings
> mci: imx-esdhc: use dma mapping functions
> net: fec_imx: remove unnecessary DMA sync ops
> net: fec_imx: Use dma mapping functions
> clock: Add i.MX8MQ clock driver
> serial: i.MX: Add i.MX8 support
> mmc: i.MX esdhc: Add i.MX8 support
> gpio: i.MX: Add i.MX8mq support
> ARM: i.MX: ocotp: Add i.MX8MQ support
> Kbuild: Add $(quote)
> Add builtin firmware support
>
Ugh. I just realized that I messed up when generated this series and
failed to include last 14 patches (there should be 52 total). Will
resend correct series shortly.
Sorry for the noise.
Thanks,
Andrey Smirnov
> Documentation/boards/imx.rst | 4 +-
> Makefile | 2 +-
> arch/arm/Kconfig | 1 +
> arch/arm/cpu/Kconfig | 1 +
> arch/arm/dts/imx8mq-pinfunc.h | 623 +++++++++++++++++
> arch/arm/dts/imx8mq.dtsi | 624 +++++++++++++++++
> arch/arm/include/asm/syscounter.h | 24 +
> arch/arm/include/asm/system.h | 24 +
> arch/arm/mach-imx/Kconfig | 9 +
> arch/arm/mach-imx/Makefile | 2 +
> arch/arm/mach-imx/boot.c | 8 +-
> arch/arm/mach-imx/cpu_init.c | 2 +
> arch/arm/mach-imx/imx.c | 4 +
> arch/arm/mach-imx/imx8-ddrc.c | 114 ++++
> arch/arm/mach-imx/imx8mq.c | 85 +++
> arch/arm/mach-imx/include/mach/ccm.h | 20 +
> arch/arm/mach-imx/include/mach/debug_ll.h | 11 +
> arch/arm/mach-imx/include/mach/generic.h | 15 +
> .../arm/mach-imx/include/mach/imx7-ccm-regs.h | 16 +-
> .../arm/mach-imx/include/mach/imx8-ccm-regs.h | 15 +
> arch/arm/mach-imx/include/mach/imx8-ddrc.h | 66 ++
> arch/arm/mach-imx/include/mach/imx8mq-regs.h | 123 ++++
> .../arm/mach-imx/include/mach/imx_cpu_types.h | 1 +
> arch/arm/mach-imx/include/mach/iomux-mx8.h | 645 ++++++++++++++++++
> arch/arm/mach-imx/include/mach/iomux-v3.h | 9 +
> arch/arm/mach-imx/include/mach/xload.h | 2 +-
> arch/arm/mach-imx/xload-esdhc.c | 121 ++--
> arch/mips/dts/include/dt-bindings | 1 -
> common/Kconfig | 8 +
> common/clock.c | 52 --
> drivers/clk/imx/Makefile | 3 +
> drivers/clk/imx/clk-frac-pll.c | 226 ++++++
> drivers/clk/imx/clk-imx8mq.c | 580 ++++++++++++++++
> drivers/clk/imx/clk-sccg-pll.c | 242 +++++++
> drivers/clk/imx/clk.h | 27 +
> drivers/clocksource/armv8-timer.c | 21 +-
> drivers/gpio/gpio-imx.c | 3 +
> drivers/mci/imx-esdhc.c | 54 +-
> drivers/net/fec_imx.c | 19 +-
> drivers/net/fec_imx.h | 1 +
> drivers/nvmem/Kconfig | 2 +-
> drivers/nvmem/ocotp.c | 10 +
> drivers/pinctrl/imx-iomux-v3.c | 56 +-
> drivers/serial/serial_imx.c | 5 +-
> firmware/Kconfig | 7 +
> firmware/Makefile | 55 ++
> include/clock.h | 68 +-
> include/dt-bindings/clock/imx8mq-clock.h | 629 +++++++++++++++++
> include/firmware.h | 8 +
> include/linux/iopoll.h | 69 ++
> include/serial/imx-uart.h | 5 +
> scripts/Kbuild.include | 1 +
> scripts/Makefile.lib | 1 +
> 53 files changed, 4538 insertions(+), 186 deletions(-)
> create mode 100644 arch/arm/dts/imx8mq-pinfunc.h
> create mode 100644 arch/arm/dts/imx8mq.dtsi
> create mode 100644 arch/arm/include/asm/syscounter.h
> create mode 100644 arch/arm/mach-imx/imx8-ddrc.c
> create mode 100644 arch/arm/mach-imx/imx8mq.c
> create mode 100644 arch/arm/mach-imx/include/mach/ccm.h
> create mode 100644 arch/arm/mach-imx/include/mach/imx8-ccm-regs.h
> create mode 100644 arch/arm/mach-imx/include/mach/imx8-ddrc.h
> create mode 100644 arch/arm/mach-imx/include/mach/imx8mq-regs.h
> create mode 100644 arch/arm/mach-imx/include/mach/iomux-mx8.h
> delete mode 120000 arch/mips/dts/include/dt-bindings
> create mode 100644 drivers/clk/imx/clk-frac-pll.c
> create mode 100644 drivers/clk/imx/clk-imx8mq.c
> create mode 100644 drivers/clk/imx/clk-sccg-pll.c
> create mode 100644 firmware/Kconfig
> create mode 100644 firmware/Makefile
> create mode 100644 include/dt-bindings/clock/imx8mq-clock.h
> create mode 100644 include/linux/iopoll.h
>
> --
> 2.17.0
>
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2018-06-07 12:59 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-06 18:43 Andrey Smirnov
2018-06-06 18:43 ` [PATCH v3 01/38] ARM: i.MX: xload: Fix compiler warning Andrey Smirnov
2018-06-06 18:43 ` [PATCH v3 02/38] ARM: i.MX: compile arm32 specific errata only for CPU32 Andrey Smirnov
2018-06-06 18:43 ` [PATCH v3 03/38] ARM: Add i.MX8 support Andrey Smirnov
2018-06-06 18:43 ` [PATCH v3 04/38] aarch64: Add i.MX8 debug UART support Andrey Smirnov
2018-06-06 18:43 ` [PATCH v3 05/38] Include our own include/dt-bindings Andrey Smirnov
2018-06-06 18:43 ` [PATCH v3 06/38] mci: imx-esdhc: use dma mapping functions Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 07/38] net: fec_imx: remove unnecessary DMA sync ops Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 08/38] net: fec_imx: Use dma mapping functions Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 09/38] net: fec_imx: Make use of IS_ALIGNED Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 10/38] clock: Add i.MX8MQ clock driver Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 11/38] serial: i.MX: Add i.MX8 support Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 12/38] mmc: i.MX esdhc: " Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 13/38] gpio: i.MX: Add i.MX8mq support Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 14/38] ARM: i.MX: ocotp: Add i.MX8MQ support Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 15/38] ARM: i.MX: Split shared CCM code into a separate file Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 16/38] ARM: i.MX: Add IOMUX pad constants for i.MX8 Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 17/38] ARM: i.MX: Add basic CCM " Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 18/38] ARM: Add constants and helpers for system counter interface Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 19/38] clocksource: armv8-timer: Convert explicit assembly into helpers Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 20/38] ARM: i.MX8: Initialize system counter Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 21/38] ARM: i.MX: boot: Fix address casting on 64-bit platforms Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 22/38] ARM: boot: Add trivial i.MX8 support Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 23/38] ARM: i.MX: xload-esdhc: Rework to make code be less i.MX6-specific Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 24/38] ARM: i.MX: xload-esdhc: Allow custom buffer address, device offset Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 25/38] ARM: i.MX: xload-esdhc: Add support for i.MX8 Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 26/38] pinctrl: i.MX: " Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 27/38] Documentation: imx: Change block size for 'dd' to 1024 Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 28/38] Documentation: i.MX: Add missing <soctype> Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 29/38] clocksource: armv8-timer: Make armv8_clocksource_read() static Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 30/38] clocksource: armv8-timer: Make use of postcore_platform_driver() Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 31/38] Port <linux/iopoll.h> from U-Boot Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 32/38] common/clock: Move delay and timeout functions to clock.h Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 33/38] clock: Use udelay() to implement mdelay() Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 34/38] ARM: i.MX8: Add DDRC PHY and DDR CTL base addresses Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 35/38] Kbuild: Add $(quote) Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 36/38] Add builtin firmware support Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 37/38] ARM: i.MX8: Add DDRC PHY support code Andrey Smirnov
2018-06-06 18:44 ` [PATCH v3 38/38] ARM: Specify HAVE_PBL_IMAGE for CPU_64 Andrey Smirnov
2018-06-07 12:59 ` Andrey Smirnov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAHQ1cqEBHRFxmaxMe8HF+KDR7Db1BA0h2iMd-AOe0jCWR_jsQA@mail.gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox