mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: Barebox List <barebox@lists.infradead.org>, pza@pengutronix.de
Subject: Re: [PATCH v2 4/5] clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK
Date: Mon, 27 May 2019 00:04:37 -0700	[thread overview]
Message-ID: <CAHQ1cqEDxoEcNmL+pWw3AaH14kKp1n7r13U+fDv=GKLTRyTdOw@mail.gmail.com> (raw)
In-Reply-To: <20190521155626.9906-5-a.fatoum@pengutronix.de>

On Tue, May 21, 2019 at 8:56 AM Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
>
> From: Fabio Estevam <fabio.estevam@nxp.com>
>
> Due to incorrect placement of the clock gate cell in the ldb_di[x]_clk
> tree, the glitchy parent mux of ldb_di[x]_clk can cause a glitch to
> enter the ldb_di_ipu_div divider. If the divider gets locked up, no
> ldb_di[x]_clk is generated, and the LVDS display will hang when the
> ipu_di_clk is sourced from ldb_di_clk.
>
> To fix the problem, both the new and current parent of the ldb_di_clk
> should be disabled before the switch. This patch ensures that correct
> steps are followed when ldb_di_clk parent is switched in the beginning
> of boot. The glitchy muxes are then registered as read-only. The clock
> parent can be selected using the assigned-clocks and
> assigned-clock-parents properties of the ccm device tree node:
>
>         &clks {
>                 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
>                                   <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
>                 assigned-clock-parents = <&clks IMX6QDL_CLK_MMDC_CH1_AXI>,
>                                          <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
>         };
>
> The issue is explained in detail in EB821 ("LDB Clock Switch Procedure &
> i.MX6 Asynchronous Clock Switching Guidelines") [1].
>
> [1] http://www.nxp.com/files/32bit/doc/eng_bulletin/EB821.pdf
>
> Signed-off-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@nxp.com>
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> Reviewed-by: Akshay Bhat <akshay.bhat@timesys.com>
> Tested-by Joshua Clayton <stillcompiling@gmail.com>
> Tested-by: Charles Kang <Charles.Kang@advantech.com.tw>
> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
> [afa: ported to barebox from Linux commit 5d283b0838]
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
>  drivers/clk/imx/clk-imx6.c | 264 ++++++++++++++++++++++++++++++++++++-
>  1 file changed, 261 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/imx/clk-imx6.c b/drivers/clk/imx/clk-imx6.c
> index 22f33aee03e9..69586f04a21f 100644
> --- a/drivers/clk/imx/clk-imx6.c
> +++ b/drivers/clk/imx/clk-imx6.c
> @@ -64,6 +64,12 @@ static inline int cpu_is_plus(void)
>         return cpu_is_mx6qp() || cpu_is_mx6dp();
>  }
>
> +/* Audio/Video PLL post dividers don't work on i.MX6q revision 1.0 */
> +static inline int cpu_has_working_video_pll_post_div(void) {

Another { that should be on a new line.

> +       return !((cpu_is_mx6q() || cpu_is_mx6d()) &&
> +                imx_silicon_revision() == IMX_CHIP_REV_1_0);

Same story with cpu_is_mx6*() here. Imx_silicon_revision() depends on
imx_init() being called as well AFAIU.

Thanks,
Andrey Smirnov

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2019-05-27  7:04 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-21 15:56 [PATCH v2 0/5] clk: imx6: work around LDB hang caused by ERR009219 Ahmad Fatoum
2019-05-21 15:56 ` [PATCH v2 1/5] clk: imx6: remove quirky clk_set_parent(LDB_diN_sel, pll5_video_div) Ahmad Fatoum
2019-05-23 10:01   ` Philipp Zabel
2019-05-23 10:28     ` Ahmad Fatoum
2019-05-26 21:55   ` Andrey Smirnov
2019-05-27  6:29     ` Ahmad Fatoum
2019-05-27  6:50       ` Andrey Smirnov
2019-05-27  7:23         ` Ahmad Fatoum
2019-05-27  7:28           ` Andrey Smirnov
2019-05-27  7:49             ` Ahmad Fatoum
2019-05-27  8:02               ` Andrey Smirnov
2019-05-27  9:19                 ` Ahmad Fatoum
2019-05-27  7:25         ` Andrey Smirnov
2019-05-27  7:39           ` Ahmad Fatoum
2019-05-21 15:56 ` [PATCH v2 2/5] clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only Ahmad Fatoum
2019-05-23 10:01   ` Philipp Zabel
2019-05-27  7:01   ` Andrey Smirnov
2019-05-27  7:38     ` Ahmad Fatoum
2019-05-21 15:56 ` [PATCH v2 3/5] clk: imx6: Mask mmdc_ch1 handshake for periph2_sel and mmdc_ch1_axi_podf Ahmad Fatoum
2019-05-23 10:01   ` Philipp Zabel
2019-05-21 15:56 ` [PATCH v2 4/5] clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK Ahmad Fatoum
2019-05-23 10:03   ` Philipp Zabel
2019-05-26 21:58   ` Andrey Smirnov
2019-05-27  7:04   ` Andrey Smirnov [this message]
2019-05-21 15:56 ` [PATCH v2 5/5] clk: imx6: define an enum for ldb mux inputs Ahmad Fatoum
2019-05-23 10:03   ` Philipp Zabel
2019-05-23 10:35     ` Ahmad Fatoum
2019-05-26 21:59 ` [PATCH v2 0/5] clk: imx6: work around LDB hang caused by ERR009219 Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAHQ1cqEDxoEcNmL+pWw3AaH14kKp1n7r13U+fDv=GKLTRyTdOw@mail.gmail.com' \
    --to=andrew.smirnov@gmail.com \
    --cc=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=pza@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox