From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-io0-x22d.google.com ([2607:f8b0:4001:c06::22d]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1fYhYM-0003u3-Qg for barebox@lists.infradead.org; Fri, 29 Jun 2018 00:46:24 +0000 Received: by mail-io0-x22d.google.com with SMTP id e13-v6so6946028iof.6 for ; Thu, 28 Jun 2018 17:46:12 -0700 (PDT) MIME-Version: 1.0 References: In-Reply-To: From: Andrey Smirnov Date: Thu, 28 Jun 2018 17:46:00 -0700 Message-ID: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: Troubles running qemu64 target To: ranquet.guillaume@gmail.com Cc: Barebox List , =?UTF-8?Q?Rapha=C3=ABl_Poggi?= Guillaume: I haven't used QEMU ARM64 version of the code, but I have spent some time on i.MX8M which is ARM64 as well. See my comments below. On Thu, Jun 28, 2018 at 6:46 AM ranquet guillaume wrote: > > Hello. > > I'm pretty new to barebox and I'm having some troubles running the > qemu64 target. > to top it off, I'm also new to the ARM world... and this is my first > attempt at looking at a bootloader... > > I'm having trouble porting some hardware to barebox... and while I'm > waiting for a JTAG probe, I though I could have some fun with qemu64 > :) > > The boot stops pretty early in the flow. way before anything can be > printed on the serial. I have attached gdb to the qemu-system. > The "qemu-system" seems to be stuck when trying to execute an stp with > the stack pointer as the destination. > > I'm having the feeling that I have a configuration issue because sp = 0x0 > > x27 0x0 0 > x28 0x0 0 > x29 0x0 0 > x30 0x0 0 > sp 0x0 0x0 > pc 0x40000000 0x40000000 > cpsr 0x400003c5 1073742789 > fpsr 0x0 0 > fpcr 0x0 0 > (gdb) disassemble > Dump of assembler code for function start: > => 0x0000000040000000 <+0>: b 0x40000048 > 0x0000000040000004 <+4>: nop > 0x0000000040000008 <+8>: nop > 0x000000004000000c <+12>: nop > ... > 0x0000000040000048 <+72>: b 0x40013444 > > > then we are branching to > Dump of assembler code for function barebox_arm_reset_vector: > => 0x0000000040013444 <+0>: stp x29, x30, [sp, #-16]! > 0x0000000040013448 <+4>: mov x29, sp The above looks like barebox_arm_reset_vector's preamble to me, which it would have since: a) It is not declared as __naked b) AFAIK, __naked is not supported on AArch64 version of GCC, so even if it was it wouldn't help > 0x000000004001344c <+8>: bl 0x40000050 > > with sp still equals to 0x0. > > stepping from there seems to get me "stuck"... > when interrupting gdb (Ctrl-C) and dumping the registers, I'm getting > the feeling I'm out of barebox code with pc equals 0x200 > > x29 0x0 0 > x30 0x0 0 > sp 0x0 0x0 > pc 0x200 0x200 > cpsr 0x3c5 965 > fpsr 0x0 0 > > > It's probably some kind of configuration issue...? though I see no > code to set sp before that stp instruction. IMHO this doesn't look like a configuration issue and I agree there's no code to set SP up. > I tried toying with the memory map, setting stack and text base > addresses, but it doesn't seem to fix my issue. > Or maybe it's okay to decrement sp while it's equal to 0x0? AFAIK, it would be OK if underlying emulated hardware had any kind of memory mapped at the end of address space (sp would wrap in that case), but as far as I can tell QEMU ARM64 virt platform doesn't, which I think is the reason you are seeing the result you are seeing. > Any ideas? comments? I am not sure about the proper way to resolve this, I'd be curious to hear from Raphael (original author, CC'd in this reply) and how this worked for him first. However you can very quickly verify/disprove your bad SP value theory by doing: set $sp=0xBFFFFFF0 before letting the processor hit those SP instructions when you step through it and see if barebox runs fine after that. Thanks, Andrey Smirnov _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox