mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Cc: Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH 1/1] ARM: Initial OP-TEE support
Date: Tue, 29 Jan 2019 14:35:40 -0800	[thread overview]
Message-ID: <CAHQ1cqH01_01H-+wgur4HEYfSaJWg_pFuGTK+6Wiw8wMxHDRug@mail.gmail.com> (raw)
In-Reply-To: <d85fd6ff3a46012e532ee5b1f568ff1d5b3afe5a.1548760200.git-series.r.czerwinski@pengutronix.de>

On Tue, Jan 29, 2019 at 3:11 AM Rouven Czerwinski
<r.czerwinski@pengutronix.de> wrote:
>
> From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
>
> This adds initial support for OP-TEE, see https://www.op-tee.org/
>
> barebox starts in secure mode as usual. When booting a kernel
> the bootm code also loads the optee_os binary. Instead of jumping
> into the kernel barebox jumps into the optee_os binary and puts
> the kernel execution address into the lr register. OP-TEE then
> jumps into the kernel in nonsecure mode.
>
> The optee_os binary is passed with the -t option to bootm or
> with global.bootm.tee.
>
> Optionally OP-TEE can be compiled into barebox using the builtin firmware
> feature. Enable the Kconfig option and place or link your tee binary as
> optee.bin into the firmware directory.
>
> The amount of SDRAM which is kept free for OP-TEE is configurable.
>
> This patch was tested on a i.MX6 Nitrogen6x board.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
> ---
>  arch/arm/cpu/Makefile              |   2 +-
>  arch/arm/cpu/start-kernel-optee.S  |  14 ++++-
>  arch/arm/cpu/start.c               |   3 +-
>  arch/arm/include/asm/armlinux.h    |   2 +-
>  arch/arm/include/asm/barebox-arm.h |   9 ++-
>  arch/arm/lib32/armlinux.c          |  10 ++-
>  arch/arm/lib32/bootm.c             | 109 +++++++++++++++++++++++++++++-
>  arch/arm/lib32/bootu.c             |   2 +-
>  arch/arm/lib32/bootz.c             |   2 +-
>  commands/bootm.c                   |  11 ++-
>  common/Kconfig                     |  33 +++++++++-
>  common/bootm.c                     |   6 ++-
>  firmware/Kconfig                   |   3 +-
>  firmware/Makefile                  |   2 +-
>  include/bootm.h                    |   3 +-
>  include/tee/optee.h                |  30 ++++++++-
>  16 files changed, 234 insertions(+), 7 deletions(-)
>  create mode 100644 arch/arm/cpu/start-kernel-optee.S
>  create mode 100644 include/tee/optee.h
>
> diff --git a/arch/arm/cpu/Makefile b/arch/arm/cpu/Makefile
> index a35db43..e6e74e0 100644
> --- a/arch/arm/cpu/Makefile
> +++ b/arch/arm/cpu/Makefile
> @@ -12,6 +12,8 @@ obj-y += start.o entry.o
>
>  obj-pbl-y += setupc$(S64).o cache$(S64).o
>
> +obj-$(CONFIG_BOOTM_OPTEE) += start-kernel-optee.o
> +
>  #
>  # Any variants can be called as start-armxyz.S
>  #
> diff --git a/arch/arm/cpu/start-kernel-optee.S b/arch/arm/cpu/start-kernel-optee.S
> new file mode 100644
> index 0000000..ce5ac17
> --- /dev/null
> +++ b/arch/arm/cpu/start-kernel-optee.S
> @@ -0,0 +1,14 @@
> +#include <linux/linkage.h>
> +
> +ENTRY(start_kernel_optee)
> +        /*
> +         * r0 = optee
> +         * r1 = kernel
> +         * r2 = oftree
> +         */
> +         mov r4, r0
> +         mov r0, #0
> +         mov lr, r1
> +         mov r1, #0
> +         bx r4
> +ENDPROC(start_kernel_optee)
> diff --git a/arch/arm/cpu/start.c b/arch/arm/cpu/start.c
> index 768fa9e..e78a820 100644
> --- a/arch/arm/cpu/start.c
> +++ b/arch/arm/cpu/start.c
> @@ -226,6 +226,9 @@ __noreturn void barebox_non_pbl_start(unsigned long membase,
>
>         mem_malloc_init((void *)malloc_start, (void *)malloc_end - 1);
>
> +       if (IS_ENABLED(CONFIG_BOOTM_OPTEE))
> +               of_add_reserve_entry(endmem - CONFIG_BOOTM_OPTEE_SIZE, endmem - 1);
> +
>         pr_debug("starting barebox...\n");
>
>         start_barebox();
> diff --git a/arch/arm/include/asm/armlinux.h b/arch/arm/include/asm/armlinux.h
> index 135f11b..6af9896 100644
> --- a/arch/arm/include/asm/armlinux.h
> +++ b/arch/arm/include/asm/armlinux.h
> @@ -40,6 +40,6 @@ struct image_data;
>
>  void start_linux(void *adr, int swap, unsigned long initrd_address,
>                  unsigned long initrd_size, void *oftree,
> -                enum arm_security_state);
> +                enum arm_security_state, void *optee);
>
>  #endif /* __ARCH_ARMLINUX_H */
> diff --git a/arch/arm/include/asm/barebox-arm.h b/arch/arm/include/asm/barebox-arm.h
> index e065b47..95765f9 100644
> --- a/arch/arm/include/asm/barebox-arm.h
> +++ b/arch/arm/include/asm/barebox-arm.h
> @@ -109,6 +109,15 @@ void *barebox_arm_boot_dtb(void);
>  static inline unsigned long arm_mem_stack_top(unsigned long membase,
>                                               unsigned long endmem)
>  {
> +       /*
> +        * FIXME:
> +        * OP-TEE expects to be executed somewhere at the end of RAM.
> +        * Since we normally occupy all RAM at the end, move ourselves
> +        * a bit lower.
> +        */
> +       if (IS_ENABLED(CONFIG_BOOTM_OPTEE))
> +               return endmem - CONFIG_BOOTM_OPTEE_SIZE - SZ_64K;

You can probably change it to:

if (IS_ENABLED(CONFIG_BOOTM_OPTEE))
    endmem -= CONFIG_BOOTM_OPTEE_SIZE;

to avoid hard-coding SZ_64K in two places

> +
>         return endmem - SZ_64K;
>  }
>
> diff --git a/arch/arm/lib32/armlinux.c b/arch/arm/lib32/armlinux.c
> index c970f02..a1e3375 100644
> --- a/arch/arm/lib32/armlinux.c
> +++ b/arch/arm/lib32/armlinux.c
> @@ -258,9 +258,11 @@ static void setup_tags(unsigned long initrd_address,
>
>  }
>
> +void start_kernel_optee(void *optee, void *kernel, void *oftree);
> +
>  void start_linux(void *adr, int swap, unsigned long initrd_address,
>                  unsigned long initrd_size, void *oftree,
> -                enum arm_security_state state)
> +                enum arm_security_state state, void *optee)
>  {
>         void (*kernel)(int zero, int arch, void *params) = adr;
>         void *params = NULL;
> @@ -294,5 +296,9 @@ void start_linux(void *adr, int swap, unsigned long initrd_address,
>                 __asm__ __volatile__("mcr p15, 0, %0, c1, c0" :: "r" (reg));
>         }
>
> -       kernel(0, architecture, params);
> +       if (optee) {
> +               start_kernel_optee(optee, kernel, oftree);
> +       } else {
> +               kernel(0, architecture, params);
> +       }

Just out of curiosity, can we return back to this function in
non-secure mode and just do:

if (optee)
    optee();
kernel(0, architecture, params);

?

>  }
> diff --git a/arch/arm/lib32/bootm.c b/arch/arm/lib32/bootm.c
> index 4cf570e..69bf5bb 100644
> --- a/arch/arm/lib32/bootm.c
> +++ b/arch/arm/lib32/bootm.c
> @@ -4,6 +4,7 @@
>  #include <command.h>
>  #include <driver.h>
>  #include <environment.h>
> +#include <firmware.h>
>  #include <image.h>
>  #include <init.h>
>  #include <fs.h>
> @@ -19,6 +20,7 @@
>  #include <binfmt.h>
>  #include <restart.h>
>  #include <globalvar.h>
> +#include <tee/optee.h>
>
>  #include <asm/byteorder.h>
>  #include <asm/setup.h>
> @@ -133,11 +135,96 @@ static int get_kernel_addresses(size_t image_size,
>         return 0;
>  }
>
> +static int optee_verify_header_request_region(struct image_data *data, struct optee_header *hdr)
> +{
> +       int ret;

This function uses "ret" in some really superfluous way. I'd consider
just dropping "ret".

> +
> +       if (hdr->magic != OPTEE_MAGIC) {
> +               printf("Invalid header magic 0x%08x, expected 0x%08x\n",
> +                      hdr->magic, OPTEE_MAGIC);
> +               ret = -EINVAL;
> +               return ret;
> +       }
> +
> +       if (hdr->arch != OPTEE_ARCH_ARM32 || hdr->init_load_addr_hi) {
> +               printf("Only 32bit supported\n");
> +               ret = -EINVAL;
> +               return ret;
> +       }
> +
> +       data->tee_res = request_sdram_region("TEE", hdr->init_load_addr_lo, hdr->init_size);
> +       if (!data->tee_res) {
> +               ret = -EBUSY;

Underlying call to __request_region() in request_sdram_region() can
also return -EINVAL if, for example, requested region is too big. I
don't think hard-coding -EBUSY, really adds any useful info here.

> +               printf("Cannot request SDRAM region 0x%08x-0x%08x: %s\n",
> +                      hdr->init_load_addr_lo, hdr->init_load_addr_lo + hdr->init_size - 1,
> +                      strerror(-ret));
> +       }
> +
> +       ret = 0;
> +       return ret;
> +}
> +
> +static int bootm_load_tee_from_firmware(struct image_data *data)
> +{
> +       int ret;
> +
> +       u8 *optee;
> +       size_t optee_size;
> +
> +       struct optee_header hdr;
> +
> +       get_builtin_firmware(optee_bin, &optee, &optee_size);
> +
> +       memcpy(optee, &hdr, sizeof(hdr));
> +
> +       ret = optee_verify_header_request_region(data, &hdr);
> +       if (ret < 0)
> +               return ret;
> +
> +       memcpy(optee, (void *)data->tee_res->start, hdr.init_size);
> +
> +       printf("Copied optee binary to 0x%08x, size 0x%08x\n", data->tee_res->start, hdr.init_size);
> +
> +       ret = 0;
> +       return ret;
> +}

What if we instead do:

get_builtin_firmware(optee_bin, &optee, &optee_size);
add_mem_device("optee", optee, optee_size, 0);

and then handle that case via "/dev/optee" and
bootm_load_tee_from_file()? Is there any reason it wouldn't work?
Moreso, if that can be done we should consider just providing an API
to handle built-in firmware case and delegating that job to individual
board files, so that we have the freedom of having per-board version
of OP-TEE firmware.

> +
> +static int bootm_load_tee_from_file(struct image_data *data)
> +{
> +       int fd, ret;
> +       struct optee_header hdr;
> +
> +       fd = open(data->tee_file, O_RDONLY);
> +       if (fd < 0)
> +               return fd;

Purely optional, but please consider changing this code to be a bit
more POSIX compliant and avoid relying on getting proper error codes
from various API calls. Calls to open(), read() and read_full() should
just check if the return value is negative and return -errno if so. On
the bright side this should allow you to get rid of "ret", since you
can just do:

if (read(...) < 0)
    goto out;

    ...

out:
    ...
    return -errno

> +
> +       ret = read(fd, &hdr, sizeof(hdr));

It's very unlikely to happen, but, strictly speaking, read() doesn't
guarantee to read all sizeof(hdr) bytes, so I'd use read_full() here
as well.

> +       if (ret < 0)
> +               goto out;
> +
> +       optee_verify_header_request_region(data, &hdr);
> +       if (ret < 0)
> +               goto out;
> +
> +       ret = read_full(fd, (void *)data->tee_res->start, hdr.init_size);
> +       if (ret < 0)
> +               goto out;
> +
> +       printf("Read optee file to 0x%08x, size 0x%08x\n", data->tee_res->start, hdr.init_size);
> +
> +       ret = 0;
> +out:
> +       close(fd);
> +
> +       return ret;
> +}
> +
>  static int __do_bootm_linux(struct image_data *data, unsigned long free_mem,
>                             int swap, void *fdt)
>  {
>         unsigned long kernel;
>         unsigned long initrd_start = 0, initrd_size = 0, initrd_end = 0;
> +       void *tee;
>         enum arm_security_state state = bootm_arm_security_state();
>         void *fdt_load_address = NULL;
>         int ret;
> @@ -189,6 +276,21 @@ static int __do_bootm_linux(struct image_data *data, unsigned long free_mem,
>                         return ret;
>         }
>
> +       if (IS_ENABLED(CONFIG_BOOTM_OPTEE)) {
> +               if (data->tee_file) {
> +                       ret = bootm_load_tee_from_file(data);
> +                       if (ret)
> +                               return ret;
> +               } else {
> +                       if (IS_ENABLED(CONFIG_BOOTM_OPTEE_FIRMWARE)) {
> +                               ret = bootm_load_tee_from_firmware(data);
> +                               if (ret)
> +                                       return ret;
> +                       }
> +               }
> +       }
> +
> +
>         if (bootm_verbose(data)) {
>                 printf("\nStarting kernel at 0x%08lx", kernel);
>                 if (initrd_size)
> @@ -210,8 +312,13 @@ static int __do_bootm_linux(struct image_data *data, unsigned long free_mem,
>         if (data->dryrun)
>                 return 0;
>
> +       if (data->tee_res)
> +               tee = (void *)data->tee_res->start;
> +       else
> +               tee = NULL;
> +
>         start_linux((void *)kernel, swap, initrd_start, initrd_size,
> -                   fdt_load_address, state);
> +                   fdt_load_address, state, tee);
>
>         restart_machine();
>
> diff --git a/arch/arm/lib32/bootu.c b/arch/arm/lib32/bootu.c
> index d811da3..24c744d 100644
> --- a/arch/arm/lib32/bootu.c
> +++ b/arch/arm/lib32/bootu.c
> @@ -26,7 +26,7 @@ static int do_bootu(int argc, char *argv[])
>         oftree = of_get_fixed_tree(NULL);
>  #endif
>
> -       start_linux(kernel, 0, 0, 0, oftree, ARM_STATE_SECURE);
> +       start_linux(kernel, 0, 0, 0, oftree, ARM_STATE_SECURE, NULL);
>
>         return 1;
>  }
> diff --git a/arch/arm/lib32/bootz.c b/arch/arm/lib32/bootz.c
> index c0ffd93..a2a26ac 100644
> --- a/arch/arm/lib32/bootz.c
> +++ b/arch/arm/lib32/bootz.c
> @@ -112,7 +112,7 @@ static int do_bootz(int argc, char *argv[])
>         oftree = of_get_fixed_tree(NULL);
>  #endif
>
> -       start_linux(zimage, swap, 0, 0, oftree, ARM_STATE_SECURE);
> +       start_linux(zimage, swap, 0, 0, oftree, ARM_STATE_SECURE, NULL);
>
>         return 0;
>
> diff --git a/commands/bootm.c b/commands/bootm.c
> index c7cbdbe..100c2e9 100644
> --- a/commands/bootm.c
> +++ b/commands/bootm.c
> @@ -45,7 +45,7 @@
>  #include <magicvar.h>
>  #include <asm-generic/memory_layout.h>
>
> -#define BOOTM_OPTS_COMMON "sca:e:vo:fd"
> +#define BOOTM_OPTS_COMMON "sca:e:vo:fdt:"
>
>  #ifdef CONFIG_BOOTM_INITRD
>  #define BOOTM_OPTS BOOTM_OPTS_COMMON "L:r:"
> @@ -96,6 +96,9 @@ static int do_bootm(int argc, char *argv[])
>                 case 'd':
>                         data.dryrun = 1;
>                         break;
> +               case 't':
> +                       data.tee_file = optarg;
> +                       break;
>                 default:
>                         return COMMAND_ERROR_USAGE;
>                 }
> @@ -134,6 +137,9 @@ BAREBOX_CMD_HELP_OPT ("-e OFFS\t","entry point to the image relative to start (0
>  #ifdef CONFIG_OFTREE
>  BAREBOX_CMD_HELP_OPT ("-o DTB\t","specify open firmware device tree")
>  #endif
> +#ifdef CONFIG_BOOTM_OPTEE
> +BAREBOX_CMD_HELP_OPT ("-t TEE\t","specify TEE image")
> +#endif
>  #ifdef CONFIG_BOOTM_VERBOSE
>  BAREBOX_CMD_HELP_OPT ("-v\t","verbose")
>  #endif
> @@ -153,6 +159,9 @@ BAREBOX_CMD_START(bootm)
>  #ifdef CONFIG_BOOTM_VERBOSE
>                                           "v"
>  #endif
> +#ifdef CONFIG_BOOTM_OPTEE
> +                                         "t"
> +#endif
>                                           "] IMAGE")
>         BAREBOX_CMD_GROUP(CMD_GRP_BOOT)
>         BAREBOX_CMD_HELP(cmd_bootm_help)
> diff --git a/common/Kconfig b/common/Kconfig
> index 2ad9215..d5858b4 100644
> --- a/common/Kconfig
> +++ b/common/Kconfig
> @@ -659,6 +659,39 @@ config BOOTM_FORCE_SIGNED_IMAGES
>           are refused to boot. Effectively this means only FIT images can be booted
>           since they are the only supported image type that support signing.
>
> +config BOOTM_OPTEE
> +       bool
> +       prompt "support booting OP-TEE"
> +       depends on BOOTM && ARM
> +       help
> +         OP-TEE is a trusted execution environment (TEE). With this option
> +         enabled barebox supports starting optee_os as part of the bootm command.
> +         Instead of the kernel bootm starts the optee_os binary which then starts
> +         the kernel in nonsecure mode. Pass the optee_os binary with the -t option
> +         or in the global.bootm.tee variable.
> +
> +config BOOTM_OPTEE_SIZE
> +       hex
> +       default 0x02000000
> +       prompt "OP-TEE Memory Size"
> +       depends on BOOTM_OPTEE
> +       help
> +         Size to reserve in main memory for OP-TEE.
> +         Can be smaller than the actual size used by OP-TEE, this is used to prevent
> +         barebox from allocating memory in this area.
> +
> +config BOOTM_OPTEE_FIRMWARE
> +       bool
> +       prompt "load OP-TEE from builtin firmware"
> +       depends on BOOTM_OPTEE
> +       select FIRMWARE_OPTEE
> +       help
> +         Build OP-TEE into the barebox binary as a firmware image.
> +         Place your tee.bin into the firmware directory or the external firmware
> +         directory if defined.
> +         Barebox will use the builtin optee.bin if a separate tee_file is not
> +         defined.
> +
>  config BLSPEC
>         depends on FLEXIBLE_BOOTARGS
>         depends on !SHELL_NONE
> diff --git a/common/bootm.c b/common/bootm.c
> index 36f6c41..d7232f6 100644
> --- a/common/bootm.c
> +++ b/common/bootm.c
> @@ -58,6 +58,7 @@ void bootm_data_init_defaults(struct bootm_data *data)
>         data->initrd_address = UIMAGE_INVALID_ADDRESS;
>         data->os_address = UIMAGE_SOME_ADDRESS;
>         data->oftree_file = getenv_nonempty("global.bootm.oftree");
> +       data->tee_file = getenv_nonempty("global.bootm.tee");
>         data->os_file = getenv_nonempty("global.bootm.image");
>         getenv_ul("global.bootm.image.loadaddr", &data->os_address);
>         getenv_ul("global.bootm.initrd.loadaddr", &data->initrd_address);
> @@ -553,6 +554,8 @@ int bootm_boot(struct bootm_data *bootm_data)
>         bootm_image_name_and_part(bootm_data->os_file, &data->os_file, &data->os_part);
>         bootm_image_name_and_part(bootm_data->oftree_file, &data->oftree_file, &data->oftree_part);
>         bootm_image_name_and_part(bootm_data->initrd_file, &data->initrd_file, &data->initrd_part);
> +       if (bootm_data->tee_file)
> +               data->tee_file = xstrdup(bootm_data->tee_file);
>         data->verbose = bootm_data->verbose;
>         data->verify = bootm_data->verify;
>         data->force = bootm_data->force;
> @@ -693,6 +696,7 @@ err_out:
>         free(data->os_file);
>         free(data->oftree_file);
>         free(data->initrd_file);
> +       free(data->tee_file);
>         free(data);
>
>         return ret;
> @@ -703,6 +707,7 @@ static int bootm_init(void)
>         globalvar_add_simple("bootm.image", NULL);
>         globalvar_add_simple("bootm.image.loadaddr", NULL);
>         globalvar_add_simple("bootm.oftree", NULL);
> +       globalvar_add_simple("bootm.tee", NULL);
>         globalvar_add_simple_bool("bootm.appendroot", &bootm_appendroot);
>         if (IS_ENABLED(CONFIG_BOOTM_INITRD)) {
>                 globalvar_add_simple("bootm.initrd", NULL);
> @@ -727,6 +732,7 @@ BAREBOX_MAGICVAR_NAMED(global_bootm_image_loadaddr, global.bootm.image.loadaddr,
>  BAREBOX_MAGICVAR_NAMED(global_bootm_initrd, global.bootm.initrd, "bootm default initrd");
>  BAREBOX_MAGICVAR_NAMED(global_bootm_initrd_loadaddr, global.bootm.initrd.loadaddr, "bootm default initrd loadaddr");
>  BAREBOX_MAGICVAR_NAMED(global_bootm_oftree, global.bootm.oftree, "bootm default oftree");
> +BAREBOX_MAGICVAR_NAMED(global_bootm_tee, global.bootm.tee, "bootm default tee image");
>  BAREBOX_MAGICVAR_NAMED(global_bootm_verify, global.bootm.verify, "bootm default verify level");
>  BAREBOX_MAGICVAR_NAMED(global_bootm_verbose, global.bootm.verbose, "bootm default verbosity level (0=quiet)");
>  BAREBOX_MAGICVAR_NAMED(global_bootm_appendroot, global.bootm.appendroot, "Add root= option to Kernel to mount rootfs from the device the Kernel comes from");
> diff --git a/firmware/Kconfig b/firmware/Kconfig
> index a6f79e8..9dc9b49 100644
> --- a/firmware/Kconfig
> +++ b/firmware/Kconfig
> @@ -10,4 +10,7 @@ config FIRMWARE_IMX_LPDDR4_PMU_TRAIN
>  config FIRMWARE_IMX8MQ_ATF
>          bool
>
> +config FIRMWARE_OPTEE
> +       bool
> +
>  endmenu
> diff --git a/firmware/Makefile b/firmware/Makefile
> index 7f4dc49..5606d71 100644
> --- a/firmware/Makefile
> +++ b/firmware/Makefile
> @@ -11,6 +11,8 @@ firmware-$(CONFIG_FIRMWARE_IMX_LPDDR4_PMU_TRAIN) += \
>
>  firmware-$(CONFIG_FIRMWARE_IMX8MQ_ATF) += imx/imx8m-bl31.bin
>
> +firmware-$(CONFIG_FIRMWARE_OPTEE) += optee.bin
> +
>  # Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
>  # leading /, it's relative to $(srctree).
>  fwdir := $(subst $(quote),,$(CONFIG_EXTRA_FIRMWARE_DIR))
> diff --git a/include/bootm.h b/include/bootm.h
> index fdc73f7..5ce3318 100644
> --- a/include/bootm.h
> +++ b/include/bootm.h
> @@ -16,6 +16,7 @@ struct bootm_data {
>         const char *os_file;
>         const char *initrd_file;
>         const char *oftree_file;
> +       const char *tee_file;
>         int verbose;
>         enum bootm_verify verify;
>         bool force;
> @@ -86,6 +87,8 @@ struct image_data {
>          * it.
>          */
>         void *os_header;
> +       char *tee_file;
> +       struct resource *tee_res;
>
>         enum bootm_verify verify;
>         int verbose;
> diff --git a/include/tee/optee.h b/include/tee/optee.h
> new file mode 100644
> index 0000000..8cfe06d
> --- /dev/null
> +++ b/include/tee/optee.h
> @@ -0,0 +1,30 @@
> +/*
> + * OP-TEE related definitions
> + *
> + * (C) Copyright 2016 Linaro Limited
> + * Andrew F. Davis <andrew.davis@xxxxxxxxxx>
> + *
> + * SPDX-License-Identifier: BSD-2-Clause
> + */
> +
> +#ifndef _OPTEE_H
> +#define _OPTEE_H
> +
> +#define OPTEE_MAGIC             0x4554504f
> +#define OPTEE_VERSION           1
> +#define OPTEE_ARCH_ARM32        0
> +#define OPTEE_ARCH_ARM64        1
> +
> +struct optee_header {
> +       uint32_t magic;
> +       uint8_t version;
> +       uint8_t arch;
> +       uint16_t flags;
> +       uint32_t init_size;
> +       uint32_t init_load_addr_hi;
> +       uint32_t init_load_addr_lo;
> +       uint32_t init_mem_usage;
> +       uint32_t paged_size;
> +};
> +
> +#endif /* _OPTEE_H */
> --
> git-series 0.9.1
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2019-01-29 22:35 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-29 11:10 [PATCH 0/1] OP-TEE support for barebox Rouven Czerwinski
2019-01-29 11:10 ` [PATCH 1/1] ARM: Initial OP-TEE support Rouven Czerwinski
2019-01-29 11:15   ` Rouven Czerwinski
2019-01-29 22:35   ` Andrey Smirnov [this message]
2019-01-30  7:16     ` Rouven Czerwinski
2019-01-30 23:24       ` Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAHQ1cqH01_01H-+wgur4HEYfSaJWg_pFuGTK+6Wiw8wMxHDRug@mail.gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=r.czerwinski@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox