From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-ua0-x242.google.com ([2607:f8b0:400c:c08::242]) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1danr0-0001HM-0X for barebox@lists.infradead.org; Thu, 27 Jul 2017 18:49:48 +0000 Received: by mail-ua0-x242.google.com with SMTP id k43so13469460uaf.1 for ; Thu, 27 Jul 2017 11:49:25 -0700 (PDT) MIME-Version: 1.0 In-Reply-To: References: From: Andrey Smirnov Date: Thu, 27 Jul 2017 11:49:23 -0700 Message-ID: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH] Add new command fs2bridge for socfpga To: Mabcded Babcde Cc: "barebox@lists.infradead.org" On Thu, Jul 27, 2017 at 9:20 AM, Mabcded Babcde wrote: > Hi, > this patch adds a new command to barebox. It is used to enable or > disable the fpga-to-sdram bridges on socfpgas. The patch is based on a > manual from altera > (https://www.altera.com/support/support-resources/knowledge-base/embedded/2016/how-and-when-can-i-enable-the-fpga2sdram-bridge-on-cyclone-v-soc.html) > and a implementation for u-boot > (https://github.com/rogerq/u-boot/blob/master/arch/arm/mach-socfpga/misc.c). > The fpga2sdram fpga configuration can only be set when the SDRAM > interface is idle. So it is necessary to use the on-chip ram. And by "on-chip ram" you mean i-cache and not SRAM block used by first stage bootloader, correct? I am just a bit confused by the wording. > To bring all fpga2sdram bridges out of reset it is necessary to write 0x3FFF to > the register. Only the fpga2sdram bridges are enabled or disabled but > no other bridges like the axi bridges. Linux kernel already has: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt?h=v4.13-rc2 so, IMHO, it would be better to implement a compatible driver and, if ability to change the value at run-time is needed, add "enable" property to it rather than introducing a separate command. > I'm a beginner to embedded and > open-source software. This is the reason why I don't know to which > branch I have to push this patch and I don't know which license should > be applied here because I used some code from another source (see > above GPL License / Altera). Nevertheless I would be happy to > contribute to Barebox. > Thanks, Mathieu > > > --- Just in case you didn't know this already, text below this line will be ignored when the patch is applied, so this is a great place to put some technical or personal notes that might not necessarily belong to the commit message. > commands/Kconfig | 7 ++++ > commands/Makefile | 1 + > commands/f2sbridge.c | 92 ++++++++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 100 insertions(+) > create mode 100644 commands/f2sbridge.c > > diff --git a/commands/Kconfig b/commands/Kconfig > index ae2dc4b..328ab1b 100644 > --- a/commands/Kconfig > +++ b/commands/Kconfig > @@ -2127,6 +2127,13 @@ config CMD_SEED > help > Seed the pseudo random number generator (PRNG) > > +config CMD_F2SBRIDGE > + bool > + depends on ARCH_SOCFPGA > + prompt "f2sbridge" > + help > + Enables or disables the fpga2sdram bridge > + > # end Miscellaneous commands > endmenu > > diff --git a/commands/Makefile b/commands/Makefile > index 37486dc..2006bca 100644 > --- a/commands/Makefile > +++ b/commands/Makefile > @@ -123,3 +123,4 @@ obj-$(CONFIG_CMD_SPD_DECODE) += spd_decode.o > obj-$(CONFIG_CMD_MMC_EXTCSD) += mmc_extcsd.o > obj-$(CONFIG_CMD_NAND_BITFLIP) += nand-bitflip.o > obj-$(CONFIG_CMD_SEED) += seed.o > +obj-$(CONFIG_CMD_F2SBRIDGE) += f2sbridge.o > diff --git a/commands/f2sbridge.c b/commands/f2sbridge.c > new file mode 100644 > index 0000000..8d3bbcc > --- /dev/null > +++ b/commands/f2sbridge.c > @@ -0,0 +1,92 @@ > +/* > + * Copyright (C) ??? Maybe: Copyright (C) 2017 Your Name Based on the code form U-Boot Copyright (C) Year, Altera ? > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ > + > + > +#include > +#include > +#include > + > +#define SOCFPGA_SYSMGR_ADDRESS 0xFFD08000 > +#define SOCFPGA_SDR_ADDRESS 0xFFC20000 > + > +#define SDR_CTRLGRP_FPGAPORTRST_ADDRESS 0x5080 > +#define SDR_CTRLGRP_STATICCFG_ADDRESS 0x505C > +#define SDR_CTRLGRP_STATICCFG_APPLYCFG_MASK 0x00000008 > + > +#define SYSMGR_FPGAINTF_MODULE (SOCFPGA_SYSMGR_ADDRESS + 0x28) > + > + > +static void socfpga_sdram_apply_staticcfg(void) > +{ > + const uint32_t staticcfg = SOCFPGA_SDR_ADDRESS + > SDR_CTRLGRP_STATICCFG_ADDRESS; > + const uint32_t applymask = SDR_CTRLGRP_STATICCFG_APPLYCFG_MASK; > + uint32_t val = readl(staticcfg) | applymask; > + > + /* > + * SDRAM staticcfg register specific: > + * When applying the register setting, the CPU must not access > + * SDRAM. Luckily for us, we can abuse i-cache here to help us > + * circumvent the SDRAM access issue. The idea is to make sure > + * that the code is in one full i-cache line by branching past > + * it and back. Once it is in the i-cache, we execute the core > + * of the code and apply the register settings. > + * > + * The code below uses 7 instructions, while the Cortex-A9 has > + * 32-byte cachelines, thus the limit is 8 instructions total. > + */ > + asm volatile( > + ".align 5 \n" > + " b 2f \n" > + "1: str %0, [%1] \n" > + " dsb \n" > + " isb \n" > + " b 3f \n" > + "2: b 1b \n" > + "3: nop \n" > + : : "r"(val), "r"(staticcfg) : "memory", "cc"); > +} > + > + > +int do_f2sbridge(int argc, char *argv[]) > +{ > + if (argc != 2) > + return COMMAND_ERROR_USAGE; > + > + switch (*argv[1]) { > + case 'e': // Enable > + // hps peripheral controller to fpga > + iowrite32(0, SYSMGR_FPGAINTF_MODULE); You use readl() above but iowrite32() (as opposed to writel()) here, is that on purpose? Thank you for the contribution! Andrey Smirnov _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox