* [PATCH] at91sam9260/9g20ek: use -EINVAL for invalid gpio on atmel_mci @ 2013-02-18 9:58 Fabio Porcedda 2013-02-19 7:32 ` Sascha Hauer 0 siblings, 1 reply; 4+ messages in thread From: Fabio Porcedda @ 2013-02-18 9:58 UTC (permalink / raw) To: barebox Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> --- arch/arm/boards/at91sam9260ek/init.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boards/at91sam9260ek/init.c b/arch/arm/boards/at91sam9260ek/init.c index 77ca6bb..dc2976a 100644 --- a/arch/arm/boards/at91sam9260ek/init.c +++ b/arch/arm/boards/at91sam9260ek/init.c @@ -156,6 +156,8 @@ static void at91sam9260ek_phy_reset(void) static struct atmel_mci_platform_data __initdata ek_mci_data = { .bus_width = 4, .slot_b = 1, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, }; static void ek_usb_add_device_mci(void) -- 1.8.1.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] at91sam9260/9g20ek: use -EINVAL for invalid gpio on atmel_mci 2013-02-18 9:58 [PATCH] at91sam9260/9g20ek: use -EINVAL for invalid gpio on atmel_mci Fabio Porcedda @ 2013-02-19 7:32 ` Sascha Hauer 2013-02-19 10:03 ` Fabio Porcedda 0 siblings, 1 reply; 4+ messages in thread From: Sascha Hauer @ 2013-02-19 7:32 UTC (permalink / raw) To: Fabio Porcedda; +Cc: barebox Hi Fabio, On Mon, Feb 18, 2013 at 10:58:08AM +0100, Fabio Porcedda wrote: > Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> > Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> > --- > arch/arm/boards/at91sam9260ek/init.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm/boards/at91sam9260ek/init.c b/arch/arm/boards/at91sam9260ek/init.c > index 77ca6bb..dc2976a 100644 > --- a/arch/arm/boards/at91sam9260ek/init.c > +++ b/arch/arm/boards/at91sam9260ek/init.c > @@ -156,6 +156,8 @@ static void at91sam9260ek_phy_reset(void) > static struct atmel_mci_platform_data __initdata ek_mci_data = { > .bus_width = 4, > .slot_b = 1, > + .detect_pin = -EINVAL, > + .wp_pin = -EINVAL, > }; Is this for master or for -next? Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] at91sam9260/9g20ek: use -EINVAL for invalid gpio on atmel_mci 2013-02-19 7:32 ` Sascha Hauer @ 2013-02-19 10:03 ` Fabio Porcedda 2013-02-19 10:30 ` Fabio Porcedda 0 siblings, 1 reply; 4+ messages in thread From: Fabio Porcedda @ 2013-02-19 10:03 UTC (permalink / raw) To: Sascha Hauer; +Cc: barebox On Tue, Feb 19, 2013 at 8:32 AM, Sascha Hauer <s.hauer@pengutronix.de> wrote: > Hi Fabio, > > On Mon, Feb 18, 2013 at 10:58:08AM +0100, Fabio Porcedda wrote: >> Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> >> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> >> --- >> arch/arm/boards/at91sam9260ek/init.c | 2 ++ >> 1 file changed, 2 insertions(+) >> >> diff --git a/arch/arm/boards/at91sam9260ek/init.c b/arch/arm/boards/at91sam9260ek/init.c >> index 77ca6bb..dc2976a 100644 >> --- a/arch/arm/boards/at91sam9260ek/init.c >> +++ b/arch/arm/boards/at91sam9260ek/init.c >> @@ -156,6 +156,8 @@ static void at91sam9260ek_phy_reset(void) >> static struct atmel_mci_platform_data __initdata ek_mci_data = { >> .bus_width = 4, >> .slot_b = 1, >> + .detect_pin = -EINVAL, >> + .wp_pin = -EINVAL, >> }; > > Is this for master or for -next? I think is for master because is a fix. Best regards -- Fabio Porcedda > Sascha > > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] at91sam9260/9g20ek: use -EINVAL for invalid gpio on atmel_mci 2013-02-19 10:03 ` Fabio Porcedda @ 2013-02-19 10:30 ` Fabio Porcedda 0 siblings, 0 replies; 4+ messages in thread From: Fabio Porcedda @ 2013-02-19 10:30 UTC (permalink / raw) To: Sascha Hauer; +Cc: barebox On Tue, Feb 19, 2013 at 11:03 AM, Fabio Porcedda <fabio.porcedda@gmail.com> wrote: > On Tue, Feb 19, 2013 at 8:32 AM, Sascha Hauer <s.hauer@pengutronix.de> wrote: >> Hi Fabio, >> >> On Mon, Feb 18, 2013 at 10:58:08AM +0100, Fabio Porcedda wrote: >>> Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> >>> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> >>> --- >>> arch/arm/boards/at91sam9260ek/init.c | 2 ++ >>> 1 file changed, 2 insertions(+) >>> >>> diff --git a/arch/arm/boards/at91sam9260ek/init.c b/arch/arm/boards/at91sam9260ek/init.c >>> index 77ca6bb..dc2976a 100644 >>> --- a/arch/arm/boards/at91sam9260ek/init.c >>> +++ b/arch/arm/boards/at91sam9260ek/init.c >>> @@ -156,6 +156,8 @@ static void at91sam9260ek_phy_reset(void) >>> static struct atmel_mci_platform_data __initdata ek_mci_data = { >>> .bus_width = 4, >>> .slot_b = 1, >>> + .detect_pin = -EINVAL, >>> + .wp_pin = -EINVAL, >>> }; >> >> Is this for master or for -next? > > I think is for master because is a fix. I'll send a v2 with all the other boards. > Best regards > -- > Fabio Porcedda > >> Sascha >> >> >> -- >> Pengutronix e.K. | | >> Industrial Linux Solutions | http://www.pengutronix.de/ | >> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | >> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- Fabio Porcedda _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-02-19 10:30 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2013-02-18 9:58 [PATCH] at91sam9260/9g20ek: use -EINVAL for invalid gpio on atmel_mci Fabio Porcedda 2013-02-19 7:32 ` Sascha Hauer 2013-02-19 10:03 ` Fabio Porcedda 2013-02-19 10:30 ` Fabio Porcedda
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox