From: Michael Burkey <mdburkey@gmail.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Porting barebox (devicetree) to Variscite iMX6 SOM
Date: Thu, 12 Dec 2013 13:56:14 -0500 [thread overview]
Message-ID: <CAJyuEedGuDU7yX29MeM3894xQ3c3FuZgp1h_ahFXvzLr2_0fdQ@mail.gmail.com> (raw)
In-Reply-To: <CAJyuEefmcqQVKKszuvmGZx4NqaK+j79+-g4gD-ruq9vMO85Wug@mail.gmail.com>
Additionally, here are the dts and dtsi files I added for the Variscite part:
---------------------------------
arch/arm/dts/imx6q-var-custom.dts
---------------------------------
/*
* Copyright 2013 Michael Burkey
* Based on code written by Christian Hemp, Phytec Messtechnik GmbH
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx6q-var-som.dtsi"
/ {
model = "Variscite i.MX6 Quad Custom Carrier-Board";
compatible = "variscite,imx6q-custom", "variscite,imx6q-som", "fsl,imx6q";
chosen {
linux,stdout-path = &uart1;
environment@0 {
compatible = "barebox,environment";
device-path = &gpmi, "partname:barebox-environment";
};
};
};
&uart1 {
status = "okay";
};
&usdhc2 {
status = "okay";
};
&usbh1 {
status = "okay";
disable-over-current;
};
&i2c1 {
status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_2>;
};
-------------------------------
arch/arm/dts/imx6q-var-som-dtsi
-------------------------------
/*
* Copyright 2013 Michael Burkey
* Based on code written by Christian Hemp, Phytec Messtechnik GmbH
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include "imx6q.dtsi"
/ {
model = "Variscite i.MX6 Quad SOM";
compatible = "variscite,imx6q-som", "fsl,imx6q";
memory {
reg = <0x10000000 0x40000000>;
};
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand_1>;
nand-on-flash-bbt;
status = "okay";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "barebox";
reg = <0x0 0x200000>;
};
partition@1 {
label = "barebox-environment";
reg = <0x200000 0x10000>;
};
partition@2 {
label = "kernel";
reg = <0x210000 0x600000>;
};
partition@3 {
label = "rootfs";
reg = <0x860000 0x18000000>;
};
partition@4 {
label = "profilefs";
reg = <0x18860000 0x400000>;
};
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2_2>;
cd-gpios = <&gpio3 29 0>;
status = "disabled";
};
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-12-12 18:56 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-11 17:07 Michael Burkey
2013-12-11 23:17 ` Alexander Aring
2013-12-12 8:04 ` Sascha Hauer
2013-12-12 18:49 ` Michael Burkey
2013-12-12 18:56 ` Michael Burkey [this message]
2013-12-12 19:12 ` Alexander Aring
2013-12-12 19:24 ` Michael Burkey
2013-12-12 19:58 ` Sascha Hauer
2013-12-12 22:44 ` Michael Burkey
2013-12-18 16:39 ` Michael Burkey
2013-12-18 21:34 ` Michael Burkey
2013-12-19 8:09 ` Sascha Hauer
2014-01-09 7:20 ` Michael Burkey
2014-01-09 19:59 ` Michael Burkey
2014-01-10 8:00 ` Sascha Hauer
2014-01-10 8:13 ` Sascha Hauer
2014-01-15 18:35 ` Michael Burkey
2014-01-16 14:13 ` Sascha Hauer
2014-01-16 21:18 ` Michael Burkey
2014-01-20 8:00 ` Sascha Hauer
2014-01-29 21:10 ` Michael Burkey
2014-01-29 21:53 ` Michael Burkey
2014-02-01 18:35 ` Sascha Hauer
2014-02-04 21:44 ` Michael D. Burkey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAJyuEedGuDU7yX29MeM3894xQ3c3FuZgp1h_ahFXvzLr2_0fdQ@mail.gmail.com \
--to=mdburkey@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox