Hi all,<div><br></div><div>Im working on my own imx27 designed board and wanted to try barebox on it.Actually I&#39;m trying it with the phytec board config and it seems to work fine booting on my nfs kernel and rootfs.</div>

<div>But when Im trying to boot from my 128MiB NAND memory then it doesn&#39;t work and there is no decompression stage from the kernel.</div><div>Here is what Im getting :</div><div><br></div><div><div>Board: Phytec phyCard-i.MX27</div>

<div>registered netconsole as cs1</div><div>cfi_probe: cfi_flash base: 0xc0000000 size: 0x02000000</div><div>NAND device: Manufacturer ID: 0x2c, Chip ID: 0xac (Micron NAND 512MiB 1,8V 8-bit)</div><div>Bad block table found at page 262080, version 0x01</div>

<div>Bad block table found at page 262016, version 0x01</div><div>Before PHY reset</div><div>After PHY reset</div><div>ULPI Vendor ID 0xffffff92    Product ID 0xffffff92</div><div>No ISP1504 found</div><div>ehci@ehci0: USB EHCI 1.00</div>

<div>ULPI Vendor ID 0xffffff92    Product ID 0xffffff92</div><div>No ISP1504 found</div><div>ehci@ehci1: USB EHCI 1.00</div><div>Malloc space: 0xa7a00000 -&gt; 0xa7f00000 (size  5 MB)</div><div>Stack space : 0xa79f8000 -&gt; 0xa7a00000 (size 32 kB)</div>

<div>running /env/bin/init...</div><div><br></div><div>Hit any key to stop autoboot:  1</div><div>booting kernel of type uImage from /dev/<a href="http://nand0.kernel.bb">nand0.kernel.bb</a></div><div>barebox:/ bootu /dev/<a href="http://nand0.kernel.bb">nand0.kernel.bb</a> </div>

<div>commandline: console=ttymxc0,115200 video=imxfb:Chimei-LW700AT9003</div><div>arch_number: 1698</div><div><br></div><div>It seems I&#39;m getting some issues with my nand since when I tried to flash it and the erase task failed :</div>

<div><br></div><div>erasing partition /dev/<a href="http://nand0.kernel.bb">nand0.kernel.bb</a></div><div><br></div><div>erase: Invalid argument</div><div><br></div><div>flashing uImage-apf27 to /dev/<a href="http://nand0.kernel.bb">nand0.kernel.bb</a></div>

<div><br></div><div>TFTP from server 192.168.0.2 (&#39;uImage-apf27&#39; -&gt; &#39;/dev/<a href="http://nand0.kernel.bb">nand0.kernel.bb</a>&#39;)</div><div>        #################################################################</div>

<div>        #################################################################</div><div>        #################################################################</div><div>        #################################################################</div>

<div>        #################################################################</div><div>        #################################################################</div><div>        #################################################################</div>

<div>        #################################################################</div><div>        #</div><div><br></div><div>How can I fix that ?</div><div>Thanks for the help. </div><div><br></div><div><br></div><div><br>

</div>-- <br>__________________________________<br><i><font face="&#39;comic sans ms&#39;, sans-serif">Kamel BOUHARA</font></i><div>7 rue Jules César<div>02100 SAINT-QUENTIN<br>06.17.83.29.04<br><br></div></div><br>
</div>