* [Makefile bug] make barebox.s : dead loop
@ 2013-12-02 8:22 Kevin Du Huanpeng
2013-12-02 8:36 ` Kevin Du Huanpeng
0 siblings, 1 reply; 6+ messages in thread
From: Kevin Du Huanpeng @ 2013-12-02 8:22 UTC (permalink / raw)
To: barebox
How to reproduce this:
1. edit Makefile
> 169 ARCH ?= mips
> 170 CROSS_COMPILE ?= mips-linux-gnu-
2. make some defconfig
> make dlink-dir-320_defconfig
3. make barebox.s
>make barebox.s
4. endless make....
PWDH include/generated/passwd.h
CC common/password.o
LD common/built-in.o
LD barebox
SYSMAP System.map
DISASM barebox.S
CHK include/generated/version.h
CHK include/generated/utsrelease.h
CHK include/generated/compile.h
PWDH include/generated/passwd.h
CC common/password.o
LD common/built-in.o
AS arch/mips/boot/start.o
LD arch/mips/boot/built-in.o
GEN .version
CHK include/generated/compile.h
UPD include/generated/compile.h
CC common/version.o
PWDH include/generated/passwd.h
CC common/password.o
LD common/built-in.o
LD barebox
SYSMAP System.map
DISASM barebox.S
CHK include/generated/version.h
CHK include/generated/utsrelease.h
CHK include/generated/compile.h
PWDH include/generated/passwd.h
CC common/password.o
LD common/built-in.o
AS arch/mips/boot/start.o
LD arch/mips/boot/built-in.o
GEN .version
CHK include/generated/compile.h
UPD include/generated/compile.h
CC common/version.o
PWDH include/generated/passwd.h
CC common/password.o
LD common/built-in.o
LD barebox
SYSMAP System.map
DISASM barebox.S
CHK include/generated/version.h
CHK include/generated/utsrelease.h
CHK include/generated/compile.h
PWDH include/generated/passwd.h
CC common/password.o
LD common/built-in.o
AS arch/mips/boot/start.o
LD arch/mips/boot/built-in.o
GEN .version
CHK include/generated/compile.h
UPD include/generated/compile.h
CC common/version.o
PWDH include/generated/passwd.h
CC common/password.o
LD common/built-in.o
LD barebox
SYSMAP System.map
DISASM barebox.S
CHK include/generated/version.h
CHK include/generated/utsrelease.h
CHK include/generated/compile.h
PWDH include/generated/passwd.h
CC common/password.o
LD common/built-in.o
AS arch/mips/boot/start.o
LD arch/mips/boot/built-in.o
GEN .version
CHK include/generated/compile.h
UPD include/generated/compile.h
CC common/version.o
PWDH include/generated/passwd.h
CC common/password.o
LD common/built-in.o
LD barebox
SYSMAP System.map
DISASM barebox.S
^Cmake[9]: *** wait: No child processes. Stop.
make[9]: *** Waiting for unfinished jobs....
make[9]: *** wait: No child processes. Stop.
make[8]: *** [barebox.s] Error 2
make[7]: *** [barebox.s] Interrupt
make[6]: *** [barebox.s] Interrupt
make[5]: *** [barebox.s] Interrupt
make[4]: *** [barebox.s] Interrupt
make[3]: *** [barebox.s] Interrupt
make[2]: *** [barebox.s] Interrupt
make[1]: *** [barebox.s] Interrupt
make: *** [barebox.s] Interrupt
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Makefile bug] make barebox.s : dead loop
2013-12-02 8:22 [Makefile bug] make barebox.s : dead loop Kevin Du Huanpeng
@ 2013-12-02 8:36 ` Kevin Du Huanpeng
2013-12-02 9:13 ` Sascha Hauer
0 siblings, 1 reply; 6+ messages in thread
From: Kevin Du Huanpeng @ 2013-12-02 8:36 UTC (permalink / raw)
To: barebox
I add barebox.s after the target barebox.S,
It works.
maybe should add the same thing with
----------
ifdef CONFIG_X86
barebox.S: barebox
ifdef CONFIG_X86_HDBOOT
------------
@@ -723,7 +724,7 @@ endif
@echo " * Init Calls content" >> barebox.S
$(Q)$(OBJDUMP) -j .barebox_initcalls -d barebox >> barebox.S
else
-barebox.S: barebox FORCE
+barebox.S barebox.s: barebox FORCE
$(call if_changed,disasm)
endif
2013/12/2 Kevin Du Huanpeng <u74147@gmail.com>:
> How to reproduce this:
> 1. edit Makefile
>> 169 ARCH ?= mips
>> 170 CROSS_COMPILE ?= mips-linux-gnu-
> 2. make some defconfig
>> make dlink-dir-320_defconfig
> 3. make barebox.s
>>make barebox.s
> 4. endless make....
> PWDH include/generated/passwd.h
> CC common/password.o
> LD common/built-in.o
> LD barebox
> SYSMAP System.map
> DISASM barebox.S
> CHK include/generated/version.h
> CHK include/generated/utsrelease.h
> CHK include/generated/compile.h
> PWDH include/generated/passwd.h
> CC common/password.o
> LD common/built-in.o
> AS arch/mips/boot/start.o
> LD arch/mips/boot/built-in.o
> GEN .version
> CHK include/generated/compile.h
> UPD include/generated/compile.h
> CC common/version.o
> PWDH include/generated/passwd.h
> CC common/password.o
> LD common/built-in.o
> LD barebox
> SYSMAP System.map
> DISASM barebox.S
> CHK include/generated/version.h
> CHK include/generated/utsrelease.h
> CHK include/generated/compile.h
> PWDH include/generated/passwd.h
> CC common/password.o
> LD common/built-in.o
> AS arch/mips/boot/start.o
> LD arch/mips/boot/built-in.o
> GEN .version
> CHK include/generated/compile.h
> UPD include/generated/compile.h
> CC common/version.o
> PWDH include/generated/passwd.h
> CC common/password.o
> LD common/built-in.o
> LD barebox
> SYSMAP System.map
> DISASM barebox.S
> CHK include/generated/version.h
> CHK include/generated/utsrelease.h
> CHK include/generated/compile.h
> PWDH include/generated/passwd.h
> CC common/password.o
> LD common/built-in.o
> AS arch/mips/boot/start.o
> LD arch/mips/boot/built-in.o
> GEN .version
> CHK include/generated/compile.h
> UPD include/generated/compile.h
> CC common/version.o
> PWDH include/generated/passwd.h
> CC common/password.o
> LD common/built-in.o
> LD barebox
> SYSMAP System.map
> DISASM barebox.S
> CHK include/generated/version.h
> CHK include/generated/utsrelease.h
> CHK include/generated/compile.h
> PWDH include/generated/passwd.h
> CC common/password.o
> LD common/built-in.o
> AS arch/mips/boot/start.o
> LD arch/mips/boot/built-in.o
> GEN .version
> CHK include/generated/compile.h
> UPD include/generated/compile.h
> CC common/version.o
> PWDH include/generated/passwd.h
> CC common/password.o
> LD common/built-in.o
> LD barebox
> SYSMAP System.map
> DISASM barebox.S
> ^Cmake[9]: *** wait: No child processes. Stop.
> make[9]: *** Waiting for unfinished jobs....
> make[9]: *** wait: No child processes. Stop.
> make[8]: *** [barebox.s] Error 2
> make[7]: *** [barebox.s] Interrupt
> make[6]: *** [barebox.s] Interrupt
> make[5]: *** [barebox.s] Interrupt
> make[4]: *** [barebox.s] Interrupt
> make[3]: *** [barebox.s] Interrupt
> make[2]: *** [barebox.s] Interrupt
> make[1]: *** [barebox.s] Interrupt
> make: *** [barebox.s] Interrupt
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Makefile bug] make barebox.s : dead loop
2013-12-02 8:36 ` Kevin Du Huanpeng
@ 2013-12-02 9:13 ` Sascha Hauer
2013-12-02 12:27 ` Kevin Du Huanpeng
0 siblings, 1 reply; 6+ messages in thread
From: Sascha Hauer @ 2013-12-02 9:13 UTC (permalink / raw)
To: Kevin Du Huanpeng; +Cc: barebox
On Mon, Dec 02, 2013 at 04:36:50PM +0800, Kevin Du Huanpeng wrote:
> I add barebox.s after the target barebox.S,
> It works.
> maybe should add the same thing with
>
> ----------
> ifdef CONFIG_X86
> barebox.S: barebox
> ifdef CONFIG_X86_HDBOOT
> ------------
>
>
> @@ -723,7 +724,7 @@ endif
> @echo " * Init Calls content" >> barebox.S
> $(Q)$(OBJDUMP) -j .barebox_initcalls -d barebox >> barebox.S
> else
> -barebox.S: barebox FORCE
> +barebox.S barebox.s: barebox FORCE
> $(call if_changed,disasm)
Normally you are supposed to call 'make barebox.S' (with uppercase 'S'),
but I think it's fine to just add the same target with a lowercase 's'
like you did to make both work. Care to send a proper patch with
Signed-off-by?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Makefile bug] make barebox.s : dead loop
2013-12-02 9:13 ` Sascha Hauer
@ 2013-12-02 12:27 ` Kevin Du Huanpeng
2013-12-03 11:25 ` Sascha Hauer
0 siblings, 1 reply; 6+ messages in thread
From: Kevin Du Huanpeng @ 2013-12-02 12:27 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
hi, Hauer:
There is two targets of barebox.S,
one is X86,
I just try to compile the x86 barebox,
to test if there is the same problem with x86 arch.
but i got this:
0. my host & gcc:
$ cat /proc/version
Linux version 3.8.0-29-generic (buildd@akateko) (gcc version 4.6.3
(Ubuntu/Linaro 4.6.3-1ubuntu5) ) #42~precise1-Ubuntu SMP Wed Aug 14
15:31:16 UTC 2013
$ gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/i686-linux-gnu/4.6/lto-wrapper
Target: i686-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro
4.6.3-1ubuntu5'
--with-bugurl=file:///usr/share/doc/gcc-4.6/README.Bugs
--enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr
--program-suffix=-4.6 --enable-shared --enable-linker-build-id
--with-system-zlib --libexecdir=/usr/lib --without-included-gettext
--enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.6
--libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu
--enable-libstdcxx-debug --enable-libstdcxx-time=yes
--enable-gnu-unique-object --enable-plugin --enable-objc-gc
--enable-targets=all --disable-werror --with-arch-32=i686
--with-tune=generic --enable-checking=release --build=i686-linux-gnu
--host=i686-linux-gnu --target=i686-linux-gnu
Thread model: posix
gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5)
1. edit Makefile
ARCH=x86
CROSS_COMPILE=
2. $ make generic_defconfig
3. make
LD arch/x86/boot/built-in.o
GEN .version
CHK include/generated/compile.h
UPD include/generated/compile.h
CC common/version.o
LD common/built-in.o
LD barebox
ld: section .eh_frame loaded at [000000000001605c,000000000001f01b]
overlaps section .barebox_initcalls loaded at
[000000000001605c,00000000000160b7]
make: *** [barebox] Error 1
dev@bogon:~/wr720n/bug.dis/x86$
2013/12/2 Sascha Hauer <s.hauer@pengutronix.de>:
> On Mon, Dec 02, 2013 at 04:36:50PM +0800, Kevin Du Huanpeng wrote:
>> I add barebox.s after the target barebox.S,
>> It works.
>> maybe should add the same thing with
>>
>> ----------
>> ifdef CONFIG_X86
>> barebox.S: barebox
>> ifdef CONFIG_X86_HDBOOT
>> ------------
>>
>>
>> @@ -723,7 +724,7 @@ endif
>> @echo " * Init Calls content" >> barebox.S
>> $(Q)$(OBJDUMP) -j .barebox_initcalls -d barebox >> barebox.S
>> else
>> -barebox.S: barebox FORCE
>> +barebox.S barebox.s: barebox FORCE
>> $(call if_changed,disasm)
>
> Normally you are supposed to call 'make barebox.S' (with uppercase 'S'),
> but I think it's fine to just add the same target with a lowercase 's'
> like you did to make both work. Care to send a proper patch with
> Signed-off-by?
>
> Sascha
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Makefile bug] make barebox.s : dead loop
2013-12-02 12:27 ` Kevin Du Huanpeng
@ 2013-12-03 11:25 ` Sascha Hauer
2013-12-04 14:17 ` Kevin Du Huanpeng
0 siblings, 1 reply; 6+ messages in thread
From: Sascha Hauer @ 2013-12-03 11:25 UTC (permalink / raw)
To: Kevin Du Huanpeng; +Cc: barebox
Hi Kevin,
On Mon, Dec 02, 2013 at 08:27:39PM +0800, Kevin Du Huanpeng wrote:
>
> LD arch/x86/boot/built-in.o
> GEN .version
> CHK include/generated/compile.h
> UPD include/generated/compile.h
> CC common/version.o
> LD common/built-in.o
> LD barebox
> ld: section .eh_frame loaded at [000000000001605c,000000000001f01b]
> overlaps section .barebox_initcalls loaded at
> [000000000001605c,00000000000160b7]
> make: *** [barebox] Error 1
> dev@bogon:~/wr720n/bug.dis/x86$
Same here. Could you try the following patch? It resolves this for me
and the resulting image works with qemu.
Sascha
8<-------------------------------------------------------
From 5be365b6b36372466f88815b97d38bc203c6e183 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 3 Dec 2013 12:20:56 +0100
Subject: [PATCH] x86: Fix linker script
Do not load sections to specific addresses. This fixes linking which otherwise
fails with newer toolchains with:
/opt/OSELAS.Toolchain-2012.12.1/i586-unknown-linux-gnu/gcc-4.7.2-glibc-2.16.0-binutils-2.22-kernel-3.6-sanitized/bin/i586-unknown-linux-gnu-ld: section .eh_frame loaded at [0000000000015fb4,000000000001b0bf] overlaps section .barebox_initcalls loaded at [0000000000015fb4,000000000001600f]
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/x86/lib/barebox.lds.S | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/x86/lib/barebox.lds.S b/arch/x86/lib/barebox.lds.S
index 05d0f77..83e991c 100644
--- a/arch/x86/lib/barebox.lds.S
+++ b/arch/x86/lib/barebox.lds.S
@@ -137,7 +137,7 @@ SECTIONS
#endif
/* the main barebox part (32 bit) */
- .text : AT ( LOADADDR(.bootstrapping) + SIZEOF(.bootstrapping) ) {
+ .text : {
/* do not align here! It may fails with the LOADADDR! */
_stext = .;
_text = .;
@@ -154,38 +154,38 @@ SECTIONS
BAREBOX_BARE_INIT_SIZE
_sdata = .;
- .data : AT ( LOADADDR(.text) + SIZEOF(.text) ) {
+ .data : {
*(.data*)
. = ALIGN(4);
} > barebox
- .got : AT ( LOADADDR(.data) + SIZEOF (.data) ) {
+ .got : {
*(.got*)
. = ALIGN(4);
} > barebox
- .barebox_cmd : AT ( LOADADDR(.got) + SIZEOF (.got) ) {
+ .barebox_cmd : {
__barebox_cmd_start = .;
BAREBOX_CMDS
__barebox_cmd_end = .;
. = ALIGN(4);
} > barebox
- .barebox_magicvars : AT ( LOADADDR(.barebox_cmd) + SIZEOF (.barebox_cmd) ) {
+ .barebox_magicvars : {
__barebox_magicvar_start = .;
BAREBOX_MAGICVARS
__barebox_magicvar_end = .;
. = ALIGN(4);
} > barebox
- .barebox_initcalls : AT ( LOADADDR(.barebox_magicvars) + SIZEOF (.barebox_magicvars) ) {
+ .barebox_initcalls : {
__barebox_initcalls_start = .;
INITCALLS
__barebox_initcalls_end = .;
. = ALIGN(4);
} > barebox
- .__usymtab : AT ( LOADADDR(.barebox_initcalls) + SIZEOF (.barebox_initcalls) ) {
+ .__usymtab : {
__usymtab_start = .;
BAREBOX_SYMS
__usymtab_end = .;
--
1.8.4.3
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Makefile bug] make barebox.s : dead loop
2013-12-03 11:25 ` Sascha Hauer
@ 2013-12-04 14:17 ` Kevin Du Huanpeng
0 siblings, 0 replies; 6+ messages in thread
From: Kevin Du Huanpeng @ 2013-12-04 14:17 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
Hi, I tested it. works.
1. save the patch to file named x86.patch
2. git apply x86.patch
3. export ARCH=x86
4. make generic_defconfig
5. make
[ no error]
6. make barebox.s
7. endless loop again.
- - - - - -
CHK include/generated/compile.h
CHK include/generated/version.h
CHK include/generated/utsrelease.h
CHK include/generated/compile.h
^Cmake[23]: *** [barebox.s] Interrupt
make[22]: *** [barebox.s] Interrupt
make[21]: *** [barebox.s] Interrupt
make[20]: *** [barebox.s] Interrupt
make[19]: *** [barebox.s] Interrupt
make[18]: *** [barebox.s] Interrupt
make[17]: *** [barebox.s] Interrupt
make[16]: *** [barebox.s] Interrupt
make[15]: *** [barebox.s] Interrupt
make[14]: *** [barebox.s] Interrupt
make[13]: *** [barebox.s] Interrupt
make[12]: *** [barebox.s] Interrupt
make[11]: *** [barebox.s] Interrupt
make[10]: *** [barebox.s] Interrupt
- - - -
8. edit Makefile
ifdef CONFIG_X86
-barebox.S : barebox
+barebox.S barebox.s: barebox
ifdef CONFIG_X86_HDBOOT
9. [no error]
2013/12/3 Sascha Hauer <s.hauer@pengutronix.de>:
> Hi Kevin,
>
> On Mon, Dec 02, 2013 at 08:27:39PM +0800, Kevin Du Huanpeng wrote:
>>
>> LD arch/x86/boot/built-in.o
>> GEN .version
>> CHK include/generated/compile.h
>> UPD include/generated/compile.h
>> CC common/version.o
>> LD common/built-in.o
>> LD barebox
>> ld: section .eh_frame loaded at [000000000001605c,000000000001f01b]
>> overlaps section .barebox_initcalls loaded at
>> [000000000001605c,00000000000160b7]
>> make: *** [barebox] Error 1
>> dev@bogon:~/wr720n/bug.dis/x86$
>
> Same here. Could you try the following patch? It resolves this for me
> and the resulting image works with qemu.
>
> Sascha
>
> 8<-------------------------------------------------------
>
> From 5be365b6b36372466f88815b97d38bc203c6e183 Mon Sep 17 00:00:00 2001
> From: Sascha Hauer <s.hauer@pengutronix.de>
> Date: Tue, 3 Dec 2013 12:20:56 +0100
> Subject: [PATCH] x86: Fix linker script
>
> Do not load sections to specific addresses. This fixes linking which otherwise
> fails with newer toolchains with:
>
> /opt/OSELAS.Toolchain-2012.12.1/i586-unknown-linux-gnu/gcc-4.7.2-glibc-2.16.0-binutils-2.22-kernel-3.6-sanitized/bin/i586-unknown-linux-gnu-ld: section .eh_frame loaded at [0000000000015fb4,000000000001b0bf] overlaps section .barebox_initcalls loaded at [0000000000015fb4,000000000001600f]
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> arch/x86/lib/barebox.lds.S | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/x86/lib/barebox.lds.S b/arch/x86/lib/barebox.lds.S
> index 05d0f77..83e991c 100644
> --- a/arch/x86/lib/barebox.lds.S
> +++ b/arch/x86/lib/barebox.lds.S
> @@ -137,7 +137,7 @@ SECTIONS
> #endif
>
> /* the main barebox part (32 bit) */
> - .text : AT ( LOADADDR(.bootstrapping) + SIZEOF(.bootstrapping) ) {
> + .text : {
> /* do not align here! It may fails with the LOADADDR! */
> _stext = .;
> _text = .;
> @@ -154,38 +154,38 @@ SECTIONS
> BAREBOX_BARE_INIT_SIZE
>
> _sdata = .;
> - .data : AT ( LOADADDR(.text) + SIZEOF(.text) ) {
> + .data : {
> *(.data*)
> . = ALIGN(4);
> } > barebox
>
> - .got : AT ( LOADADDR(.data) + SIZEOF (.data) ) {
> + .got : {
> *(.got*)
> . = ALIGN(4);
> } > barebox
>
> - .barebox_cmd : AT ( LOADADDR(.got) + SIZEOF (.got) ) {
> + .barebox_cmd : {
> __barebox_cmd_start = .;
> BAREBOX_CMDS
> __barebox_cmd_end = .;
> . = ALIGN(4);
> } > barebox
>
> - .barebox_magicvars : AT ( LOADADDR(.barebox_cmd) + SIZEOF (.barebox_cmd) ) {
> + .barebox_magicvars : {
> __barebox_magicvar_start = .;
> BAREBOX_MAGICVARS
> __barebox_magicvar_end = .;
> . = ALIGN(4);
> } > barebox
>
> - .barebox_initcalls : AT ( LOADADDR(.barebox_magicvars) + SIZEOF (.barebox_magicvars) ) {
> + .barebox_initcalls : {
> __barebox_initcalls_start = .;
> INITCALLS
> __barebox_initcalls_end = .;
> . = ALIGN(4);
> } > barebox
>
> - .__usymtab : AT ( LOADADDR(.barebox_initcalls) + SIZEOF (.barebox_initcalls) ) {
> + .__usymtab : {
> __usymtab_start = .;
> BAREBOX_SYMS
> __usymtab_end = .;
> --
> 1.8.4.3
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-12-04 14:17 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-12-02 8:22 [Makefile bug] make barebox.s : dead loop Kevin Du Huanpeng
2013-12-02 8:36 ` Kevin Du Huanpeng
2013-12-02 9:13 ` Sascha Hauer
2013-12-02 12:27 ` Kevin Du Huanpeng
2013-12-03 11:25 ` Sascha Hauer
2013-12-04 14:17 ` Kevin Du Huanpeng
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox