From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-io0-x230.google.com ([2607:f8b0:4001:c06::230]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1au3lw-0002hj-Mh for barebox@lists.infradead.org; Sat, 23 Apr 2016 20:03:21 +0000 Received: by mail-io0-x230.google.com with SMTP id f89so121266536ioi.0 for ; Sat, 23 Apr 2016 13:03:00 -0700 (PDT) MIME-Version: 1.0 Date: Sat, 23 Apr 2016 17:02:59 -0300 Message-ID: From: Fabio Estevam List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: mx6qsabresd: Cannot boot after 'saveenv' To: "barebox@lists.infradead.org" Hi, After running the 'saveenv' command on a mx6qsabresd board, I can no longer boot Barebox: barebox 2016.04.0-00120-gfeaf92e #18 Sat Apr 23 15:39:00 BRT 2016 Board: Freescale i.MX6 Quad SABRE Smart Device Board detected i.MX6 Quad revision 1.1 mdio_bus: miibus0: probed eth0: got preset MAC address: 00:04:9f:02:19:ca m25p80 m25p80@00: m25p32 (4096 Kbytes) imx-usb 2184200.usb: USB EHCI 1.00 imx-esdhc 2194000.usdhc: registered as 2194000.usdhc imx-esdhc 2198000.usdhc: registered as 2198000.usdhc imx-esdhc 219c000.usdhc: registered as 219c000.usdhc imx-ipuv3 2400000.ipu: IPUv3H probed imx-ipuv3 2800000.ipu: IPUv3H probed imx-hdmi 120000.hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2ff7b6e0 -> 0x4fef6dbf (size 511.5 MiB) imx-ipuv3-crtc imx-ipuv3-crtc0: failed to get modes: Invalid argument imx-ipuv3-crtc imx-ipuv3-crtc0: probe failed: Invalid argument imx-ipuv3-crtc imx-ipuv3-crtc1: failed to get modes: Invalid argument imx-ipuv3-crtc imx-ipuv3-crtc1: probe failed: Invalid argument imx-ipuv3-crtc imx-ipuv3-crtc2: failed to get modes: Invalid argument imx-ipuv3-crtc imx-ipuv3-crtc2: probe failed: Invalid argument imx-ipuv3-crtc imx-ipuv3-crtc3: failed to get modes: Invalid argument imx-ipuv3-crtc imx-ipuv3-crtc3: probe failed: Invalid argument mmc2: detected SD card version 2.0 mmc2: registered mmc2 envfs: wrong magic running /env/bin/init... Hit m for menu or any other key to stop autoboot: type exit to get to the menu barebox@Freescale i.MX6 Quad SABRE Smart Device Board:/ barebox@Freescale i.MX6 Quad SABRE Smart Device Board:/ saveenv saving environment barebox@Freescale i.MX6 Quad SABRE Smart Device Board:/ reset (board hangs...) Any suggestions on how to fix this? Thanks, Fabio Estevam _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox